Rehab Mart SAT-1065 Motion Sensor User Manual

June 9, 2024
Rehab Mart

Rehab Mart SAT-1065 Motion Sensor User Manual
Rehab Mart SAT-1065 Motion Sensor

PRODUCT OVERVIEW

SAT-1065 is a Wi-Fi based PIR sensor. You can check the device status, ba�ery level, alarm record and even receive push no�fica�on via APP when it detects someone moving within the detec�on range.

PRODUCT FEATURES

  • Digital PIR sensor with low power consump�on and strong an�-interference performance;
  • Standard 2.4G wireless Wi-Fi communica�on technology, two methods for Wi-Fi inclusion, EZ and AP; 2x123A ba�eries operated or USB powered;
  • Compliant with CE,FCC and RoHS;
  • Elegant design and flexible installa�on;
  • Low ba�ery alert and alarm push no�fica�on on APP;
  • Immediate report when vibra�on triggered;

PRODUCT STRUCTURE

PRODUCT STRUCTURE

PRODUCT STRUCTURE

Definition of LED Indicator

AP Mode LED indicator blink slow in red
EZ Mode LED indicator blink fast in red

Bu�on Instruction

**** In the network| Press and hold the Button for 5s then release, resume to default setting, then it enters into EZ inclusion mode
---|---
Out of the network| Press and hold the Button for 5s then release to switch EZ/AP mode

Note:

  1. In the network: Device has been included into the
  2. Out of the network: Default setting , never configured for Wi-Fi

 Specifications

Power Supply 6V 2*CR123A or 5V 1A USB DC power
Working current 40mA
Standby current 40uA
Battery Capacity 1300mAh
Detection Distance 8m
Detection Angle 120°
**** Wireless transmitting andreceiving frequency **** 2.4 GHz-2.484GHz
Network protocol supported IEEE802.11b/g/n
Encryption type WEP/TKIP/AES,WPS
**** Transmitting power 802.11b: +14dBm@ 11Mbps802.11g: +13.5dBm@

54Mbps802.11n: +13dBm@ MCS7_HT20
Receiving sensitivity| 802.11b: +17dBm@ 11Mbps802.11g: +15dBm@ 54Mbps802.11n: +13dBm@ MCS7
Working temperature| -10 ~ +40℃
Storage temperature| -20 ~ +60℃
Relative humidity| 8~80%RH

Caution:
Please do not use the DC power exceeding 5V 1A to power the device

INSTALLATION

Power on (battery or USB).

Power on \(battery or USB\).

Install the sensor’s holder in desired loca�on with crews or 3M glue.

Install the sensor

Insert the mul�-sensor into its holder.

Insert the mul�-sensor

Download app

Scanning following QR codes to download APP for Android and IOS System

QR code

Start the APP and register an account with your email address then login APP with your account;

Add Devices

Open the APP and type your mobile number or email address, and then confirm password to complete the registra�on.

APP

Add the device to the network.
EZ Mode
Power on, the red LED indicator will blink fast, then enter the EZ mode. Click the “Confirm indicator is blinking rapidly “, and click the “Next”, it will add device, once it is connected successfully, click “Done” upper right and switch to the device main interface.

EZ Mode

AP Mode
Power on, the red LED indicator will blink fast and hold the bu�on for 5S �me, then the LED indicator will blink slowly in red, Select “AP Mode” upper right, click “Confirm the indicator is blinking slowly ” and click the “Next”,then click “Go to Connect”.

AP Mode

Users can re-name or share the device a�er Wi-Fi connec�on is finished.

Delete devices
Click the upper right on the device main interface, and click “Remove Device”, select “Disconnect” and then click “Confirm” to remove this device from APP. Select “Disconnect and wipe data” and then click “Confirm” to remove this device from APP and all related data will be wiped.

Delete devices

Delete devices
Click the upper right on the device main interface, and click “Remove Device”, select “Disconnect” and then click “Confirm” to remove this device from APP. Select “Disconnect and wipe data” and then click “Confirm” to remove this device from APP and all related data will be wiped.

Delete devices

ALARM FUNCTION

The SAT-1065 is equipped to support alarms on a 24 hour (military time) based clock. Users can set scheduled alarms and receive text alerts if the device does not detect motion within the time period specified.

  • To set an alarm, tap “Manage Alarm” and tap “add.”
  • The start time must be earlier than the end time for the timer to set successfully.

ALARM FUNCTION

PIR SETTINGS

The SAT-1065 allows users to be notified of motion, tamper detection, and alarms. The smart sensor also contains technology to monitor battery charge, and alert when it detects the battery is low. These notifications can be toggled on and off within the settings panel of the SAT-1065.

PIR SETTINGS

Motion Detection History

The SAT-1065 keeps a running log of activity, showing when the device has detected motion. This information can be viewed by tapping “History” on the main sensor panel.

Motion Detection History

FCC NOTICE

This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired opera�on.

The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifica�ons or change to this equipment. Such modifica�ons or change could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separa�on between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals