U-BOAT CAPSOIL CHRONO Watch Instructions
- June 9, 2024
- U-BOAT
Table of Contents
CHRONO
Instructions
CAPSOIL CHRONO Watch
Dear Customer
WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH.
IN THIS BOOKLET YOU WILL FIND THE USER INSTRUCTIONS.
WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE
U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE U-BOAT WATCHES OWNERS, SO TO GET
ACCESS TO FURTHER BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.
Quartz
WATCH FUNCTIONS
A CHRONOGRAPH START/STOP PUSHER
B CHRONOGRAPH RESET PUSHER
C SCREW CROWN
D HOUR HAND
E MINUTE HAND
F CHRONOGRAPH SECONDS COUNTER
G SECONDS HAND
H CHRONOGRAPH MINUTE COUNTER
I CHRONOGRAPH HOUR COUNTER
Representative image.
Some components may be in different positions or not fitted.
-
POSITION 1
NEUTRAL POSITION -
POSITION 3
SECOND CLICK
USER INSTRUCTIONS
POSITION 1
NEUTRAL POSITION| operating position of the watch.
---|---
POSITION 3
SECOND CLICK| unscrew the crown C and pull it out to take it to position 3.
Rotate the crown C to set the desired time.
- Push in and screw the crown C back to position 1.
Note: it is recommended to unscrew the crown C to position 3 when the watch will not be used for a long time, to limit battery consumption.
CHRONOGRAPH FUNCTIONS
Press the (on/off) pusher A to start the chronograph hand and the
hours/minutes totalizer.
Press the pusher A again to stop the chronograph, which will restart by
pressing it again.
After measuring the times, with the chronograph stopped, press the pusher B to
reset the chronograph and totalizer hands to zero.
SPID TIME FUNCTION
- Press the pusher A to start the chronograph.
- Press the pusher B to stop the chronograph allowing an intermediate time to be read while timing continues. By pressing the pusher B again, the chronograph hands to “recover” the elapsed time.
3. 1 Start
2 Time reading
3 Restart
4 Time reading
5 Restart
6 Stop
ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION
-
Unscrew the crown C and pull it out to position 3.
-
Press the pushers A and B simultaneously for about 2 seconds.
The counter hand F will rotate 360°.
By pressing the pusher A , the counter hand F will return to the correct position.
Press the pusher B to activate counter hand I correction.
Press the pusher A to reposition the counter hand I in the correct position.
By pressing the pusher B again we activate the correction of the counter hand H.
Press the pusher A to reposition the counter hand H in the correct position. -
Screw the crown C back in to position 1.
BATTERY REPLACEMENT AND OIL ADJUSTMENT
- Innovative closure system with a compartment for quick battery change L.
- Closing system and internal oil regulation, for the exclusive use of U-BOAT specialized technicians M.
Note: the oily fluid inside the case may be subject to slight changes in shade due to the natural change of the liquid.
CARE AND MAINTENANCE
- Your watch will keep its performance intact for a long time, with proper care.
- We recommend that you have your watch checked every 3-4 years at one of our Authorized Dealers/Authorised Service Centres, to carry out ordinary maintenance on all mechanical parts and water resistance.
- We also recommend contacting an Authorized Dealer/Authorised Service Center to replace the strap.
- Do not leave the watch in places exposed to extreme temperature changes, humidity, the sun and strong magnetic fields.
- Make sure the watch is suitable for use in water.
- Always rinse the watch with fresh water after contact with salt water.
- It is advisable to unscrew the crown when the watch will not be used for a long time, to limit battery consumption. We recommend that you contact an authorized center to replace the battery.
OPTIMAL OPERATING CONDITIONS: 0°/+60°C.
U-BOAT HEAD OFFICE
Via Pesciatina 751H
Gragnano, Capannori – 55010 Lucca – Italy
Tel: +39 0583 469288 – Fax: +39 0583 462249
www.uboatwatch.com –
service@u-boatwatch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>