SKOTTI Incl Free Bag Warehouse One Instruction Manual

: June 9, 2024
: SKOTTI

Table of Contents

SKOTTI CAP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SKOTTI CAP

INSTRUCTION MANUAL

JUST. GRILL. ANY WHERE.

USER INSTRUCTIONS

From now on, you can barbecue with your Skotti not only everywhere, but also “proper with a topper”. Because our Skotti CAP is your Skotti’s lid, windshield, rotary grill, toaster and much more – including practical grill tongs.

Please read the user instructions carefully and completely to familiarize yourself with Skotti CAP before using it on your Skotti.

Keep the user instructions, so you can read them again or pass them on to other users.

SKOTTI Incl Free Bag Warehouse One

Manufacturer:: Vennskap GmbH & Co. KG
Device: Skotti Cap , collapsible grill lid for Skotti grill

SKOTTI CAP. PLEASE NOTE!

Hold or place your Skotti CAP at a maximum angle of 80 degrees to the ground.
Never light your Skotti grill when the Skotti CAP is completely on.
After lighting Skotti, wait for at least one minute before putting your Skotti CAP onto the grill. If not, you risk an explosion.
Use your Skotti CAP only with Skotti grill A4.
Caution! Skotti CAP’s accessible parts can be very hot. Keep away from children!

SKOTTI GRILL. PLEASE NOTE.

Only use Skotti outdoors.
Familiarize yourself with Skotti before connecting it to the gas cartridge.
Operate Skotti with a standard EN417 propane/butane gas mixture only, using approved screwable cartridges up to a maximum of 500 g.
Connecting other gas cartridges or gas mixtures can be very dangerous.
Before connecting the gas cartridge, make sure the gaskets between the device and the gas cartridge are in working order and condition.
Never use Skotti with defective or worn out gaskets.
Never use Skotti if the gas supply is defective or faulty or if Skotti is not working properly.
Always operate Skotti on a stable, flat surface.
Please note all warnings and follow the user instructions when grilling.
Caution! Skotti and its individual parts can heat up to high temperatures.
Keep away from children, even when Skotti is cooling down after use.

1 LET’S GET STARTED:

ALL THIS BELONGS TO YOUR SKOTTI CAP

Your Skotti CAP is packed up in our handy space-saving and durable canvas bag. Place the bag on a hard, flat surface in front of you, with the big company logo and the handles facing upwards. Open the velcro fastener carefully to make sure no parts fall out and unfold the bag completely.

Presto! Skotti CAP’s five durable stainless steel parts are laid in front of you. Three more elements for the grill tongs, which serve as a handle for your Skotti CAP, are waiting in the center pocket. Put Skotti CAP together from these parts in no time at all. With a little practice you can do it in under a minute..

Have fun saving the time.

1 1x Skotti grill tongs / Skotti CAP handles
2 1x long side panel with triangle mark
3 1x long side panel without triangle mark
4 1x short foot panel with triangle mark
5 1x short head panel without triangle mark
6 1x big cover plate

SKOTTI Incl Free Bag Warehouse One A01

Please check for clear assembly instructions in a short explanatory film at www.skotti-grill.eu

2 SET UP:

MAKE 1 FROM 8 IN 6 STEPS

Step 1:

Take the long side panel with the Skotti logo and the small triangle mark facing upward in your left hand.
Take the short foot panel with the triangle mark facing upward in your right hand and slide the short panel onto the longer one at the corresponding triangle-adjacent slits.

SKOTTI Incl Free Bag Warehouse One Step 1

Step 2:

Slot the other long side panel with the Skotti logo onto the foot panel at the open slim slits.

Step 3:

Slide the bottom panel into the three-sided structure, pointed side down and the long tabs with the triangle mark towards the foot panel.
Make sure that the hooks and tabs are at an equal height with the slits.
Slide the large tabs with a triangle mark on the cover plate into the corresponding slits on the short foot panel. Slide the hooks on the big cover plate into the slits on the long side panels and slot the cover plate onto the short foot panel at the slits. Both triangle marks of the large tabs should be visible.

Step 4:

Take the short head panel and slot it onto the long side panels at the two open slits and push it down all the way to the end.

SKOTTI Incl Free Bag Warehouse One Step 4

Step 5:
Lock Skotti CAP

Pull the cover plate back towards the short head panel using the two larger hooks protruding from the sides. The cover should lock in place..

SKOTTI Incl Free Bag Warehouse One Step 5

Step 6:

Put the handles/grill tongs together

Take the three parts for the handles/grill tongs of your Skotti CAP. Put the rods together so that the ends with the slot openings face each other and the Skotti logos on the rods face outward. Insert the finished handle from the outside into the free rectangular slots on the two long side panels..

SKOTTI Incl Free Bag Warehouse One Step 6

3 DISSEMBLING:

HOW TO PUT YOUR SKOTTI CAP BACK INTO ITS BAG

When your Skotti CAP has cooled down after grilling, you can easily stow it away in the canvas bag, saving space. Simply take it apart in the reverse order of assembly:

Take apart the handles/grill tongs. To unlock the cover plate, lift up its large tabs. Then you can remove the small head part, followed by the cover plate, one side panel and the foot panel one after the other.