AWILO K680i Rechargeable Glue Gun Instructions

: June 4, 2024
: AWILO

Table of Contents

AWILO K680i Rechargeable Glue Gun
To use
Battery Level Display
Caution
Technical Data
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AWILO K680i Rechargeable Glue Gun

Thank you for purchasing our Rechargeable Glue Gun, cordless and rechargeable meaning you can take your glue gun on the go with you. We hope you are happy with your purchase.

To use

To turn on your glue gun, press down the on/off switch located at the top of the unit till the indicator light comes on.
Insert the glue stick in to the back of the unit.
The unit will instantly begin to heat, once the indicator light turns green it means it is heated and your glue gun is ready for use.
The glue gun may take up to 5 minutes to heat up to melt the glue stick, light pressure should be applied to the trigger to release droplets of hot glue.
Pull the trigger to start the glue gun working.
To turn off your glue gun, press down on the on/off switch again until the indicator light goes off.

Battery Level Display

Red light – charging.
Green light – fully charged.
During use, if the indicator light flicks between green and red alternatively for 5 seconds it means the glue gun needs to be recharged and will turn off.

Caution

This product gets extremely hot, please use with care to avoid risk of injury.
Do not touch the nozzle or use excessive force on the trigger.
Keep out of reach of children and pets.
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Keep the hot glue gun away from flammable materials and use in work areas that are clean and dry.
Ensure you place a piece of paper or cardboard underneath the unit to catch hot glue drips and prevent damage to the underlying surface.
When not in use, please place the unit on its stand and do not lay it down on its side.
After you turn the unit off and until it fully cools down some glue might still spill out of the unit. Please ensure the glue gun is on a surface that will not be harmed by excess glue.
Always focus on the gluing task, if you need to look away place the glue gun down in a safe place on paper or cardboard to prevent damage to the underlying surface.
Do not tilt the hot glue gun nozzle upwards or attempt to use the glue gun in overhead areas.
Always ensure you use the glue gun in well ventilated areas to prevent inhalation of hot-glue vapors.