INTEX Swim Essentials Adventure Pool User Manual

June 9, 2024
INTEX

intex-logo

INTEX Swim Essentials Adventure Pool

INTEX-Swim-Essentials-Adventure-Pool-product

SAFETY AND USER MANUAL

TYPE NAMES:

  • SE ADVENTURE POOL BEIGE LEOPARD
  • SE ADVENTURE POOL WHALE
  • SE ADVENTURE POOL HELLO SUNSHINE

Importer/Manufacturer:
The Essentials B.V.- Rietveldenweg 40-5222 AR ‘s-Hertogenbosch Noord-Brabant. The Netherlands

Norm: EN 71-1:2014+ A1:2018, EN 71-2:2020, EN 71-8:2018

Warning action

2022 The Essentials B.V.- Swim Essentials Development Co, Ltd. All rights reserved TM Trademarks used in some countries of the world under license from The Essentials B.V.- Rietveldenweg 40-5222 AR ‘s-Hertogenbosch The Netherlands Patent: www.swimessentials.nl, www.swim- essentials.com

INTEX-Swim-Essentials-Adventure-Pool-fig-1

Read carefully and save these instructions for later.

WARNING! The pool is suitable for children from 1 year and older. Never leave your child unattended – drowning hazard. Use only under constant and competent supervision. Only for domestic use. Only for outdoor use. Children can drown in very small amounts of water. Empty the pool completely after each use and store the empty pool in such a way that it does not collect water from rain or any other source. Keep children in your direct sight, stay close, and actively supervise them when they are in or near the pool and when you are filling en emtying this pool. When searching for a missing child, check the pool first, even if the child is thought to be in the house. Do not allow diving or jumping into this pool. Diving or jumping into shallow water can result in injury, paralysis or death. SAFETY EQUIPMENT AND SAFE USE OF THE POOL Keep a working phone and a list of emergency phone number near the inflatable swimming pool. Learn basic life support and refresh this knowledge regularly. If you are using a pool cover, make sure it is completely removed from the pool before using the pool. Change the water regularly to prevent water-related diseases. Using chemicals without water circulation in the adventure pool can lead to high chemical concentrations. Direct contact with these chemicals can lead to injury.Keep all electrical lines, radios, speakers and other electrical appliances away from the pool. Do not place the pool near or under overhead electrical lines.

GENERAL

Pool and pool accessories are to be assembled and disassembled by adults only. Do not set up the pool on a slope or inclined surface. The area where the pool is to be set up, must be absolutely flat and level, and at least 2 m away from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical wires. Do not instal the pool on mud, sand, soft or loose soil condition, deck, platform, balcony, concrete, asphalt or any other hard surfaces. Locate the slide out of direct sunlight to reduce the likehood of scalding. Do not lean, straddle or exert pressure on the inflatable wall or side wall as injury or flooding could occur. Do not allow anyone to sit on, climb or straddle the sides of the pool. Protect all pool occupants from recreational water illnesses by keeping the water clean. Don’t swallow the pool water. Remove all hard, sharp and loose objects such as jewelries, watches, buckles, keys, shoes, hairpin, etc. from users before entering the pool. Pools are subject to wear and deteration. Property maintain your pool. Certain types of excessive or accelerated deterioration can lead to pool failure. Pool failure might cause large quantities of water to release from the pool. Do not modify this product and/or use accessories not supplied by the manufacturer. There are no spare parts.

SET UP

Depending on the size of the product, two or more adults are recommended for set up. Set up time may vary from 10 to 20 minutes (excluding water fill time).Find a flat, level clean surface that is free and clear of stones, branches or other sharp objects that may puncture the pool liner or cause injury. Certain types of grass such as St. Augustine and Bermuda, may grow through the liner. Grass growing through the liner is not an manufacturer defect. Move the product (in it’s packaging) to the selected spot before inflating. Do not inflate the product and drag it since it may result in leaks or damage. Slowly unfold the product and inspect the product for rips, tears or punctures. Do not use if the product is damaged. Lay the pool out as evenly as possible and close the drain plug(s). Inflate each section by mouth while squeezing the valve lightly at its base. If there is any straining at the seams, the product is over-inflated. If any seam begins to strain, immediately stop the inflation and release air to reduce the pressure until signs of stress on the seam are gone. Do not over-inflate or use a high pressure air compressor since it may result in seam leaks. Close and recess all inflation valve cap(s) securely by pushing down firmly on it. Slowly fill the pool with water to a safe level for the intended users.

ATTACHING THE WATER SPRAYER
Locate the sprayer connecter (A). Attach the sprayer connector (A) to a garden hose (B) by threading the sprayer coupling onto the garden hose. Tighten securely. Turn the water on slowly at fırst to allow the water to gradually fill in. Then adjust the spray as desired. If an adaptor is provided (vary with models), thread the adaptor (C) to the sprayer connector (A) and insert the garden hose.

HOW TO DRAIN THE POOL AND STORAGE
Adults shall drain and store the pool. Check local regulations for specific directions regarding the disposal of swimming pool water. Remove all accessories, toys, garden hose etc from the pool. Open the drain valve cap. Carefully open the inflation valve caps and/or exhaust valve caps to deflate the air cambers, and slowly push the sidewall inward and down to speed up the drainage of the pool. Slowly lift one side of the pool to drain out the remaining standing water Re-insert all valve caps afterward for storage. Be sure the pool and all parts are completely dry before folding. Fold and store the liner and accessories in a dry, clean indoor location.

REPAIR
The product comes with a repair patch. If you have an idea where the leak is, use a mix of dishwashing liquid and water in a spray bottle, and spray over the suspicious area. Any leak will produce bubbles that will pinpoint the location of the leak. Thoroughly clean the area surrounding the leak to remove any dirt. Cut a piece of repair patch large enough to overlap the damaged area by appox. 1,5 cm. Round of the edges, and place on the damaged area and press down firmly. You may want to use a weight on top to keep it in place. Do not inflate in one hour after patching. If the patch is not available, you can purchase silicon or polyurethane-based glue for repairing camping mats, tents or shoes from your local shop. In this case, please refer to the instruction of the glue.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals