AIVITVIN AIR 19 33.5 Inch Indoor and Outdoor Asphalt Roof Wheeled Rabbit Hutch Instruction Manual
- June 8, 2024
- AIVITVIN
Table of Contents
AIVITVIN AIR 19 33.5 Inch Indoor and Outdoor Asphalt Roof Wheeled Rabbit
Hutch
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts,screws and knobs before use.
- Reconfirm that all bolts,screws,and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure,crush and cut.
- If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
- Attach front panel Part A, B & back panel Part C to the right panel Part E by 4xP2 one side and 2xP2 the other side.
- Notice there are predrill screws holes to direct.
- Attach left panel Part D to step 1 by 2xP2 one side and 4xP2 the other side.
- Notice there are predrill screws holes to direct.
- Screw the ramp Part M to the right panel by 4xP5.
- Attach the side pen!
- Screw the Part H to the Part F & Part G by 2xP2 each side.
- Screw the metal ramp supporting board Part J inside the back panel of pen Part G by 2xP9.
- Attach the pen to the wood hutch by screwing 2xP1 on each side.
- Slide in the Upper tray N and bottom tray S, pen tray O.
- Screw the metal feeder Part R to the back panel by 2xP6.
- Put the chewing toy Part P7 into the cage anywhere you want.
- Attach the top panel of pen Part I by 4xP2 screws.
- Screw the asphalt roofs Part L to the hutch by 8xP3.
- Notice to level up the roof line.
- Screw the roof cap Part K to the roof by 4xP4.
- Attach top panel of pen and side panel of pen with 1xP8 by 4xP10 screws.
- Screw two brake casters Part Q to the 2 back legs, and one caster without brake Part P to the middle leg.
- Screw the 3 casters without brakes Part P to the front 3 legs.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage, or loss, whether direct, indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
Documents / Resources
|
AIVITVIN AIR 19 33.5 Inch Indoor and Outdoor Asphalt Roof Wheeled Rabbit
Hutch
[pdf] Instruction Manual
AIR 19 33.5 Inch Indoor and Outdoor Asphalt Roof Wheeled Rabbit Hutch, AIR 19,
AIR 19 Rabbit Hutch, Rabbit Hutch, 33.5 Inch Indoor and Outdoor Asphalt Roof
Wheeled Rabbit Hutch, Indoor and Outdoor Asphalt Roof Wheeled Rabbit Hutch,
Hutch, 33.5 Inch Hutch
---|---
References
Read User Manual Online (PDF format)
Loading......