ZGCINE PS-BX1 Charging Box User Manual

ZGCINE PS-BX1 Charging Box

Product Profile

PS-BX1 is special charging case for NP-BXI battery, adopts the magnetic cover, has over-current protection, over-voltage protection, over-temperature protection and abnormal detection functions, which can prevent the equipment battery from overcharging and damage; the charging case uses flame-retardant materials to ensure safe.

Product Component

Parameter

Feature

1. Small size and portable
2. Intelligent control of the charging process, multiple self-protection functions, safe and stable
3. Precise slot design, easy installation, the product will not fall off even if it shakes slightly;
4. Easily grasp the charging status through the indicator light
5. Fast charging, and can prevent the battery from overcharging
6. Supports simultaneous use of multiple devices, supports charging and discharging functions
7. Use fire-retardant materials without fear of complex outdoor environments
8. Two charging slots can charge 2 batteries at the same time.

Special Function

Built-in safety integrated circuit, with multiple protections, compatible with GoPro original attery or brand battery

• Temperature protection
  The thermistor and temperature control processing mechanism areadded to ensure that the lithium battery works within a safe temperature range

• Overvoltage protection
  Through the OVP circuit, the input voltage can be prevented from being too high to avoid damage to the back-end circuit.

• Output anti-reverse protection
  Through the DC output anti-reverse irrigation protection circuit, the on and off of the switch module is controlled, which avoids the phenomenon of reverse irrigation of the battery voltage and effectively protects the charging module.

• Battery overcharge protection
  The addition of lithium battery protection devices can effectively avoid overcharge and overdischarge of the battery and prevent damage to the battery.

• Short circuit protection
  fuse device is added to trigger automatic protection in the event of an abnormal short circuit to prevent damage to the motherboard and battery.

• Output overcurrent protection
  The output current is intelligently detected, and when the output current exceeds the upper limit, the output is actively shut down to protect the equipment.

• Output overvoltage protection
  Real-time intelligent detection of the output voltage, when the output voltage exceeds the upper limit, the output is actively closed to protect the battery.

• Simplify operations
  Insert the battery to start charging, easy to operate

Operation Guide

• Power display: Press the “POWER” button once, the power indicator light is white; the indicator light is red when the battery is charging, and it goes out when it is fully charged.
• Standby display: In standby, the battery indicator will display within 30 seconds, and no operation indicator will turn off.
• Output display: the battery indicator is always on.
• Forced shutdown: Press the “POWER” button twice in succession, and the battery indicator will go out.

Storage and Transportation

1. When the charging case needs to be stored for a long time, please pack the charging case after power off, put it in a dry and ventilated place, and check it every six months.
2. The charging box should be stored in a clean, dry and ventilated place, avoid contact with corrosive substances, and keep away from fire and heat sources.
3. Storage temperature:-5°C~+35°C. Storage relative humidity: <756RH
4. The charging case should be packed in a carton for transportation. During transportation, it should be protected from violent vibration, impact or squeezing to prevent sun and rain. It can be transported by vehicles, trains, ships, airplanes and other means of transportation.

Packing list

Maintenance and after-sales service

1. One year warranty
   The damage due to failure to operate in accordance with the instructions and precautions will not be covered by the warranty.

2. Warranty period
   Warranty period: the warranty period of the product is calculated from the date you purchase the product. The warranty card is the valid warranty certificate.

3. Warranty Limitation
   For the following cases of product failure, the company will not provide the warranty service as promised:

   • Products and components do not belong to our company.

   • Out of warranty.

   • Fault caused by the transfer wiring or mobile power which are not provided by our company.

   • Force majeure factors, such as earthquake, fire and other natural disasters or accidents.

   • Aging or damage of components.

   • Product failure caused by self-disassembly, repair or drop.

   • Damage caused by incorrect voltage selection.

   • Damage due to improper using.
     Maintenance record card

   • This warranty card will not be reissued arter losS, please keep it property.

   • This product has passed strict inspection, In case of any problem, please contact the company’s after-sales service department or the dealer. Prohibit self-disassembly.

Shenzhen Zhengguang imaging Equipment Co.,Ltd.
Add: 5th Floor,1st Building,Xiazao Industrial Park, Shenzhen, Guangdong, China
Postcode: 518000
Web: www.zgcine.com
Email: info@zgcine.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>