Schneider Electric ATV600 Variable Speed Drive Instruction Manual
- June 4, 2024
- Schneider Electric
Table of Contents
Schneider Electric ATV600 Variable Speed Drive
Additional information
Legal information
| This product family is in the scope of European Union directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). The product family must
be disposed according to the legislation of the country. This document is
intended for use by end of life recyclers or treatment facilities. It provides
the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
---|---
Purpose
| This document is intended for use by professional end of life recyclers or waste treatment
facilities. It provides the basic information for proper end-of-life treatment of product components and materials.
In case of special transportation:
transportation method
| No special tranportation.
Recyclability potential
| ****
85%
| Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME).
Potential disassembly risks
The information provided in this document assumes that the product is
completely de energized and uninstalled (refer to the instructions provided in
the appropriate product manuals).
Dismantling/disassembling the product may entail hazards caused by, for
example, sharp edges, chemical aggression or ejected parts.
WARNING: HAZARD DUE TO INSUFFICIENT PROTECTION
Implement all safety measures required by the applicable regulations and by
the processes used to dismantle/dis assemble and dispose of the product. Use
all necessary personal protective equipment such as gloves and goggles.
Failure to follow these instructions can result in death or serious injury.
End of Life Instructions
Coin battery inside
Recommendation| Number on
drawing
| Component / Material| Weight (in
g)
| Comment
---|---|---|---|---
To be depolluted| 1| Electronic Board (Power and Communication) > 10cm²| 2178|
To be depolluted| 2| LCD and all those back-lighted with gas discharge lamps|
25|
To be depolluted| 3| Other battery| 2,9| Lithium content: 0,07 g
To be depolluted| 4| Cable (high current)| 2138|
To be depolluted
| ****
5
| Electrolyte capacitors which size: height > 25 mm, diameter > 25 mm or proportionately similar volume| ****
1090
|
To be dismantled| 6| Steel| 31774| Housing, Front door, Cover, Ground plate,
Support, Bar
To be dismantled| 7| Aluminium| 6193| Heatsink, Bar
To be dismantled
| ****
8
| PC, ABS-PC, PA, PA6, HDPE, SAN
with or without additive, PP+EPDM and PP
| ****
1483
| ****
Housing, Chassis, Front cover
To be dismantled| 9| Copper| 227| Bar
Other| | | 5889,1|
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
|---|---|
| Brand name | Schneider Electric |
| Representative product | VARIABLE SPEED DRIVE ATV650 IP55 45KW |
400/480V DISCONNECT SWITCH – ATV650D45N4E
Product function
| The main function of the Altivar Process product range is the speed control
and variation of a synchronous, asynchronous or reluctance electric motor for
fluid management and industrial applications.
Description of the range| This range consists of products Altivar 650
and Altivar 950 with ratings from 30 to 45 kW for operation on 400V/480V,
3-phase supplies IP55.
Total representative product mass| 51000 g
Representative product dimensions| 910 mm x 290 mm x 401 mm
Accessories| No accessories needed.
Date of information release| 11/2021
Schneider Electric Industries SAS
Country Customer Care Center http://www.schneider-
electric.com/contac
35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVEOLI1506001_V2
Published by Schneider Electric
© 2021- Schneider Electric – All rights reserved