Trust GXT 180 Kusan Pro Mouse Instruction Manual
- June 8, 2024
- Trust
Table of Contents
Trust GXT 180 Kusan Pro Mouse
Button layout
| a | – Button 1 (Default = Left mouse button) |
|---|---|
| b | – Button 2 (Default = Right mouse button) |
| c | – Button 3 (Default = Mid click) |
| d | – Button 4 (Default = Forward) |
| e | – Button 5 (Default = Backward) |
| f | – Button 6 (Default = Forward) |
| g | – Button 7 (Default = Backward) |
| h | – Button 8 (Default = DPI Cycle) |
Installation
- a- Open the internet browser and go to www.trust.com/22401/driver.
- b- Click the “Download EXE” button to download the software.
- c- Click on the “Setup-GXT 180.exe” and follow the installation wizard.
- d- Click on the “Trust GXT 180.exe” shortcut to start the software.
- e- You can now start to configure the mouse. Changes will be updated directly to your mouse.
Button Programming
Assign a function
- a- Click on the ‘BUTTON’ tab.
- b- Click on the function you want to assign.
- c- Click on the button you want to re-assign
- d- Choose how the function should be executed.
- e- Click on ‘CONFIRM’.
“Left Click” cannot be reassigned.
Execution mode only appears on relevant functions.
Report rate & DPI settings
DPI setting
- a- Click on the ‘PERFORMANCE’ tab.
- b- Change the DPI settings by clicking the respective bar.
- c- Click ‘DPI SETTINGS’ to enter advanced DPI settings.
- d- Click the switch under the DPI number to enable or disable this DPI level.
- e- Click on ‘SAVE’ to update the settings to your mouse.
LED colours indicate which DPI level is currently These indication colours cannot be changed;
- RED = Level 1
- GREEN = Level 2
- BLUE = Level 3
- TURQOISE = Level 4
- PURPLE = Level 5
Other Settings
- a- Change the DPI Precision rate by dragging the respective cursor. DPI precision can be found as function and can be assigned to a button (see Step 3.).
- b- Change the Report Rate by dragging the respective cursor.
- c- Change the Acceleration by dragging the respective cursor.
- d- Change the scroll speed by dragging the respective cursor.
- After assigning the DPI Precision function to a button, press and hold that button to increase the precision to the selected DPI precision.
- DPI Precision is linked to the active DPI level.
Light Settings
Change the Light Effect
- a- Click on the ‘EFFECT’ tab.
- b- Change the light mode.
- c- Change the breathing speed.
- d- Change the brightness level.
- e- Select the desired LED color or pick a custom color by dragging the respective cursor.
Light modes;
- Constant = one solid colour
- Breathing = one breathing colour
- Colour shift = demo mode (brightness & colours not adjustable)
- Switch off = disable LED
Macro Settings
Create a Macro (Store a sequence of keys in the software)
- a- Go to the ‘BUTTON’ tab.
- b- Click on ‘MACRO’ and then on ‘MACRO SETTINGS’.
- c- Click on ‘NEW’ and double click on ‘SELF DEFINE X’ to rename the macro.
- d- Set the delay time between each action.
- e- Click ‘RECORD’ to start recording the macro. Now enter your preferred macro sequence. Click ‘RECORD’ again to stop recording the macro. (max. 34 actions)
- f- Click on ‘Apply’ to save the macro.
To assign a macro follow step 3 of this manual.
Profile Settings
Select, Save or Load a profile
- – Select one of the 5 profiles by clicking on the preferred profile.
- – Click on ‘SAVE AS’ to save a setup, Click on ‘LOAD FILE’ to load a setup.
- – Enter a name for the mouse setup you want to save, or choose the prefered profile to load.
- – Click on ‘Save’ to save the setup, click on ‘Open’ to load the setup.
- – Click on ‘Apply’ - > Your mouse setup is now saved or updated to your mouse.
Restore default settings
- a- Click on ‘RESTORE’ to reset the current profile to factory default.
- b- Click on ‘RESET ALL’ to reset all profiles to factory default.
Some Other Instructions
References
Read User Manual Online (PDF format)
Loading......