JBU Illuminto Q4 Projector User Manual

JBU Illuminto Q4 Projector

How to mirror/cast your smart device into the projector
To cast or mirror/cast your smart device’s screen on the Illuminto Q4 projector, please follow these steps:

1. Make sure both the Illuminato Q4 and your smart device are connected to the same WiFi network.
2. Open the “Mirracast” app on the Illuminato Q4.
3. Download a mirror/casting app from the Google Play store onto your smart device if you don’t already have one.
4. Open your chosen casting app on your smart device. When asked what device you would like to cast to/mirror, select “PJ- 33S.” Follow all instructions in your chosen app to complete the setup.
5. Your Illuminato Q4 should now mirror your smart device’s screen and audio.

To end mirroring/casting, press the Return (10) button on the Illuminato Q4, and select “Tier Down,” or end mirroring/casting from the app on your personal device

Remote & Mouse

Operating and aiming the remote

(Install two (2) AAA batteries in the remote.) The machine has two Infrared Sensors (25) on the front and back of the machine. For best results, point the remote at these sensors rather than the projection screen.

How to change EQ settings
The EQ settings allow you to adjust your audio balance for different types of music. You can select from preset EQ settings by pressing the EQ (L) button on the remote. The current EQ setting will be displayed in the top left corner of the screen. Press the remote’s EQ button again to cycle through each setting. When your desired EQ setting has been reached, wait a few seconds until the EQ display disappears. Your current EQ setting is now selected

How to use the mouse pointer on the remote
Pressing the Mouse (I) button on the remote once will make a virtual mouse pointer appear on screen. Use the Navigation Controls (B) to move the mouse pointer, and OK (G) to select. To return the remote to the remote setting, press the Mouse button once more.

How to use the included plug-in mouse
When navigating third-party apps inside the OS system, it is best to use the included plug-in mouse rather than the remote or machine control panel. Simply plug the included mouse into USB Slot #2 (19) and use it like any mouse to navigate the app

Maintenance

How to clean
Turn the machine and microphones off; (remember that there are separate power buttons for the machine and the projector). Unplug the machine’s power cord and disconnect any AUX, AV, HDMI, or USB plug-ins. Gently wipe the outside of the machine using a clean, dry cloth. Keep all vents, buttons, and openings free of lint and dirt. Do not immerse the machine in water and do not use any harsh cleaners.

How to store
Charge the machine so that it’s ready for the next use. Dock the wireless microphones in their holsters. Make sure that the machine is clean and dry. Bind the power cord and mouse cable individually and gently with electrician- approved fasteners.

( Note : Do not wrap or fold against the natural bend of the cords or cable. Do not wrap the cord around the machine.) Store the machine in a cool, dry place away from damaging elements. For best results, clean and store the machine after each use.

How to transport

The Illuminato Q4 was designed intentionally for easy transport and mobility. Begin by unplugging all wires from the machine. Place the microphones in the two holders attached to the side of the machine. Extend the machine handle, grip it firmly, and lift the machine. The machine will now travel like a briefcase

Troubleshooting guide

Replace the AA batteries in the microphone.
 | The battery is depleted. Be sure to charge the machine after each use.
 | ALSO/OR
Machine is not turning on| Remember that the machine has four power buttons: Machine Power (26), Projector Power (12), Projector Light (11), and the remote’s Power button (A).
 | Both the Machine Power and the Projector Power must be turned on in order for the machine to operate.

The Projector is not turning on

| If the machine appears to be powered on correctly, press the Projector Light (11) button to see if the machine is in sleep mode. If you have pressed the projector light button  and the projector is still not turning on, power down the machine and then power it back on again.

Smart OS is not booting up

| First, ensure you are in Smart OS mode by pressing the Input (15 or J) button and selecting “Smart OS.” If this does not work, power the machine down and power it back on once more.
Problem| Solution
---|---
The Menu (H) button on the remote is not working| You cannot access menu settings using the Menu button on the remote. Please use the Settings (K) button on the remote or the Menu

(14) button on the projector itself.

USB mode is not working

| Try unplugging the USB from the machine and plugging it back in again. If this does not work, you may not have any readable data on your USB drive.

Machine is not playing microphone vocals

| Ensure that the Mic Volume (7) is up on the machine’s function board and that the pill sliders on the microphones are also at a sufficient volume.

If there is still no audio output from the microphone, please check the batteries.

The remote control is not working

| Ensure you are aiming the remote at the machine’s Infrared Sensors (25). You may also try moving closer to the machine.

If this does not rectify the issue, please check the remote’s batteries.

PLEASE NOTE: Fluorescent lighting may also interfere with the remote’s signal. If you cannot remove or turn off fluorescent lights nearby, try using the plug-in mouse instead.

I cannot find the app I downloaded.

| You must add the app to the home screen. Select the “+” tile in Smart OS, navigate to the app you want, and press the Return (C or 10) button.

If your app still won’t add, you may need to remove an app from the home screen to make room, also using the “+” function. (Please note that removing apps from the home screen does not uninstall them).

I’m having difficulty navigating inside an app (e.g. “ Netflix ”)| For the most streamlined experience inside apps, please use  the  included  plugin mouse in conjunction with the machine’s Return (10) button.

Next song is not playing

| The loop setting of the music has been set to “play one song” and must be reset to “play all” in order for the next song to play. This setting can be changed in the “Media Player” app.

Song name is garbled

| The title of the song file cannot be read. Manually edit the song title on your computer and retransfer the edited file to your USB drive.
Machine powers on and then shuts down| Battery is low. Please charge the machine or replace the battery if needed.
Problem| Solution
---|---

No sound is playing from the speaker

| Ensure that the volume on the machine (6), remote (D), and your device (if applicable) are all turned to an audible level.

Also, check to see whether you are on mute by pressing Mute (F) on the remote control to see if the audio resumes.

Button or knob on the machine/ remote control is not working properly| Power off the machine and turn it back on.

Machine is not

connecting to WiFi

| Please ensure that the WiFi router and the machine are in close proximity to one another and that the WiFi network is functioning strongly. Please also ensure you have entered your password correctly.

If the WiFi still won’t connect, try restarting your router and reconnecting to the network afterward.

If any of these issues persist or if any part of the machine becomes damaged, discontinue use and consult a licensed electrician for repair. Do not attempt to modify or repair the machine yourself. You can also contact our customer service department (see back cover).

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Don’t end things on a bad note We’re here for you. If you encounter any issues with your machine—or if you have any questions or comments—please feel free to contact us. Have your warranty information on hand for faster service.

• 1844-262-7464
• Support@masingo.net
• www.masingo.net

Love your new machine? We want to hear about it!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>