allen and roth 81033 3 Light Chrome LED Vanity aInstruction Manual
- June 9, 2024
- allen and roth
Table of Contents
allen and roth 81033 3 Light Chrome LED Vanity
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
1-866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday.You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|
The fixture does not light.
| 1. The bulb is burned out
2. The power is off.
3.Faulty wire connection.
4. Faulty switch.
| 1. Replace the bulb.
2 Make sure the power supply turns on.
3. Check wiring.
4. Test or replace the switch.
CARE AND MAINTENANCE
- Shut off main power supply before performing any maintenmance on the light
WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective in material or workmanship, please contact the manufacturer. A copy of the original sales receipt will be required as proof of purchase. The manufacturer will, at its option, repair or replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 10 – 15 minutes
TOOLS REQUIRED
FEELING CONFIDENT
- Visit Lowes.com for more information
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Before beginning installation, turn off electricity at the circuit junction box or the main fuse box.
- Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do
so may damage or cut the wire insulation, which could cause serious injury or death from electric shock
CAUTION
-
All electrical connections must be in agreement with local codes, ordinances or the national electric code(NEC). Contact your municipal building department to
learn about your local codes, permits and/or inspections -
Consult a qualified electrician before installation
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
Connect wiring: WHITE to WHITE, BLACK to BLACK, BARE/GREEN to BARE
Make sure no bare wire or wire strands are visible after making connections.
Consult an electrician if wiring needs differ.
A can be installed with the socket tacing up or down.
Do not overtighten D as shade may crack or break.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>