ONE OPCF5501 Car Refrigerator with Compressor User Manual
- June 9, 2024
- ONE
Table of Contents
OPCF5501 Car Refrigerator with Compressor
User Manual
OPCF5501 Car Refrigerator with Compressor
CAR
REFRIGERATOR WITH COMPRESSOR
Attentions
Before use the refrigerator plese read this manual carefully and keep it
properly
- Before the first use of refrigerator, you should clean it inside and outside with a damp cloth.
- Do not fill the refrigerator with corrosive liquids. Do not directly pour liquids into the refrigerator.
- When the refrigerator is not used for a long time, please disconnect the power supply and keep it dry.
- Please clean the inner chamber regularly to prevent odor bacteria and ensure food safety.
Connect the power supply
- Find the DC power cord in the kit. Connect DC plug to the power outlet of the car refrigerator.
- Well place the refrigerators in the car (back-up, seats…).
- Lay out power cords as per the interior space of your car. Insert the cigarette lighter plug (one side of the power cord) into the car cigarette lighter hole.
- Press and hold the “ON /OFF” for 3 seconds to start the refrigerator.
The refrigerator can be connected to more than one source of energy.
The refrigerator can be directly connected to the 12V/24V DC power supply.
The refrigerator can be used at home (household voltage should be 100-240V)
with an 100-240V AC adapter.
Car Refrigerator Operation
Car Battery Protection Voltage: Built-in ECO electronic control module can
automatically monitor car battery voltage. Refrigerator will be automatically
cut off when the power is excessivelyconsumed, So that protecting the battery
consumption from too low to affect car starting.
Voltage | High Level set to be factory default (Voltage Protection) |
---|---|
H (High) level | M (Medium) level |
1 2V | 11.3V OFF. 12.5V ON |
24V | 24.6V OFF, 26V ON |
Note: when the refrigerator is on work, “OFF” or “ON” means the stop or
start of the compressor
A Parts schematic
1 Door Holder | 5 Handle ( optional ) |
---|---|
2 Case Cover | 6 Wheel ( optional ) |
3 Sealing Strip | 7 Power Interface |
4 Touch Screen Control Panel |
Optional Operation Method ON/OFF
Press **key to turn on/standby the refrigerator.
Temperature Setting
Touch the{+ or-} key to adjust the temperature.
Switch Mode
Press the setting button to switch between ECO (energy-saving mode) and MAX
(cooling mode).
Press and hold the setting button for 3 seconds. Press the setting button
again to switch HI (high) N2 (middle) • L3 (low) when the display flashes H.
The setting will be saved after 3 seconds of static flashing.
Celsius and Fahrenheit Switch
Press[+] and[-] 3 seconds at the same time to switch.
NOTE:**
The factory power protection setting defaults is “H(High) “level, and the
cooling mode is “MAX”
The white light shows MAX mode, green light shows ECO (energy-saving mode).
Use App
Android System : Scan icon QR code
iOS system : Search for “Car Refrigerator” in the App store
http://d.maps9.com/2knc Car Refrigerator
Operation Steps
1.Connect the device| 2.Click to turn on Bluetooth (make sure it is turned on)
3.Click to search for devices when Bluetooth is turned on| 4.After searching
for the device. click the device
icon to enter the control
Page Description
Troubles and Troubleshooting
Advice If there is any abnormal situations that cannot be resolved through
simple fault analysis, please contact professional customer service for
assistance.
Car Refrigerator Does Not Work
- Check if the power is connected properly. (check If the plug is loosened or positive and negative poles are reversed).
- Check if the power switch on the operation panel is turned on.
- Check if the cooling ventilation is normal.
- Check if the fuse is blown.
Poor Cooling Performance
- Check if the lid is closed properly
- Check if the door seal is damaged or deformed.
- Check if there is poor ventilation around the fridges.
- Check if the temperature is set properly.
Abnormal Noise
- Refrigerator is not put on a flat level surface
- Check for vibrations in surrounding objects
- Parts in the refrigerator get loose or fall off.
Refrigerator Condensation
- It is normal that there slightly will be some condensation on the refrigerator surface when air humidity is more than 75%.
**** Definition Of Error Codes On The Display
Error Code | Error Type |
---|---|
El | Low Input Voltage |
E2 | Fan Fault |
E3 | Input Voltage Fault due to compressor frequently start |
E4 | Low Rotational Speed of Compressor |
E5 | Overheating of Controller Chip |
E6 | Open or Short Circuit of NTC |
♦ It is forbidden to heat carbonated beverages such as beer, cola, and Sprite
♦ It is normal to have steam or water stains inside after cooling to heating
Failures and Solutions
Et:Low Input Voltage
-
Failure 1 · Insert refrigerator power cord into cigarette lighter before the car starts.
Solution 1: Wait for a while to connect the car after it started. -
Failure 2: Input voltage of the adapter is too low.
Solution 2: Adjust the battery protection level to middle-voltage or low- voltage. If it doesn’t work, please replace a new adapter.
E2: Fan Fault
-
please replace a new fan when identify there is a fan malfunction.
**** E3: Input Voltage Fault due to compressor frequently start -
When the refrigerator is used in car and E3 appearing
1 Please shut down for 5 minutes and restart it.
2 If it doesn’t work, that can be identified to be E1 fault, please solve it according to the solution of E1. -
When the refrigerator is connecting with adapter and E3 appearing
1 please adjust battery protection level to the middle level or low level.
2 If it doesn’t work, please replace a new adapter.
**** E4: Low Rotational Speed of Compressor -
please adjust input voltage and re power it.
****E5: Overheating of Controller Chip -
lease power off for 5 minutes and check if the overheating is caused by the bad ventilation around compressor.
Safety Attention
- Ensure proper connecting of voltage for the refrigerator at any time. (Parameter label shows the approved voltage for car refrigerator).
- Do not directly pour any liquid into the car refrigerator.
- It is forbidden to modify the refrigerators privately, in case of dangers.
- Refrigerators should not be exposed to the rain
Car Refrigerator Electrical Schematic
Applications
With an additional battery, you can hold any temperature you set in any
situations without worries.’
When storing ice cream in refrigerator. please set to the lowes temperature
and keep power on constantly.
Prevent healthy problems from bottled water deterioration caused by the high
temperature.
keep fresh for the frozen food and luxurious seafood during the Rong
travelling.
Freshness of tealeaves is effectively preserved by car refrigerator, you can
enjoy the fresh and delicious tea any time during the self-driving travelling.
Ideal storage temperature for red wine is 10C-18C. the precise temperature
control of car refrigerator guarantees the storage temperature for it.
Fruits cannot be kept in hot car for more than 2 hours, even it is in the air
conditioning. But car refrigerator is able to effectively keep the fruit fresh
for a long time.
Coation of sunglasses will drop off at the high temperature, car refrigerator
is the best ideal place to put away.
Cosmetic is easy to go bad at high temperature, so the best choice to store
outside is with a car refrigerator.
Installation Instructions for T Series Car Refrigerator Movable Handle
Holder A:six angle screwdriver 1 pc
B:fixed support 2pcs
C:big handle 1 pc
D:small handle 1 pc
- Use a six angle screwdriver (A) to remove the screws on the refrigerator and save them, total of 6 screws
- Put the small handle(D) into fixed support(B) on both sides holes
- lnstall the small handle(D) under the operation panel, and use six angle screwdriver (A) to fix it with the removed screws
- Put the big handle into fixed support(B) on both sides holes,install on the other side,alignmounting screw holes.and use six angle screwdriver (A) to fix it with the removed screws
After-Sales Service: Warranty Card
Product warranty card (user stub)
‘ [NO:………..(seal valid)
ModelNo. …….. Item No………………
Date of manufacture………………………….. Purchase date……………………
User Name…………….. User Telephone…………………
Dealer……………..Sales phone ……………….
Please fill in this warranty card correctly when purchasing
(In order to protect your rights . please ask the dealer to sign and seal this
guarantee at the time of purchase.)
Product warranty card (distribution root )
NO:…….. (seal valid)
Model No……………..
Date of manufacture…………….
Purchase date………………….
User Name…………………..
User Telephone…………………….
Please fill in this warranty card correctly when purchasing. tin order to
protect your rights . please ask the dealer to sign and seal this guarantee at
the time of purchase.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>