Shenzhen Zhongyanhai Electronic Technology Z06 Stylus Pen Charging Box User Manual
- June 9, 2024
- Shenzhen Zhongyanhai Electronic Technology
Table of Contents
Stylus Pen
Charging box User’s Manual
Z06 Stylus Pen Charging Box
Note: Only the stylus with wireless charging function is supported
Product Structure
Note:the product appearance shall be subject to the actual object
Instructions
-
Use the Type- C charging wire USB terminal to connec t thecomputer, mobile phone charger or mobile power supply.It is recommended to use a 5V/1A adapter to avoid the use of super power fast charging adapter to avoid damage;
-
The other end of Type-C charging line is connected to the charging box When the green indicator light is on, the stylus suppo rting wireless charging will be attached to the slot of the charg ing box. The red indicator light will always be on during charging, and the green indicator light will flash when the battery is fully charged;
Indicator Description
| Standby | Green light |
|---|---|
| Charging | Red light |
| Fully charged | Green light flashing |
Product Parameters
| Product name | Stylus charging box |
|---|---|
| Product color | silvery |
| Product material | aluminium alloy |
| Product size | 1903010mm |
| input parameter | DC5V，≤3A |
| Output parameters | DC5V，≤200mA |
| List of accessories | Charging box * 1 |
USB-Type-C cable 1
Instruction manual 1
Touch pen case * 1
Product Features
- It is suitable for charging the Apple pencil (2nd generation) stylus, so as to reduce the loss of the battery power of the iPad;
- The product chip has built-in voltage, current and short circuit protection to prevent the adapter from overcharging the pencil and protect your iPad pencil battery;
- Aluminum alloy CNC integrated molding design , fashionable and simple , solid and durable;
- Put the stylus close to the charging box at will, then the stylus can be stored by magnetic adsorption, and quickly conduct non inductive charging;
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 15/20cm between the radiator and your body.