QAZQA 103868 Robin WL Outdoor Lighting Instruction Manual
- June 3, 2024
- QAZQA
Table of Contents
103868 Robin WL Outdoor Lighting
Instruction Manual
103868 Robin WL Outdoor Lighting
Robin WL: 103866/103868
Wall lamp
- incl.LED QL7001209
- 300lm Module
- 80lm lamp
- 1×3.5W LED SMD
- 1×3.5W LED COB
- 230V~50Hz
- 3000K
- CRI>80
- 15000h
- 15000 ON/OFF
Overall Sizes:
103866/103868
1×3.5W LED SMD + 1×3.5W LED COB
incl. LED Board: QL7001209
230V~50Hz
This product contains a light source of energy efficiency class E| QR|
EAN
---|---|---
|
103866: 8718881121821
103868: 8718881121845
https://eprel.ec.europa.eu/qr/773577
| Replaceable (LED only) light source by a professional.
---|---
| Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaries may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaries is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
| For indoor use only, where direct contact with water is impossible
---|---
| This icon indicates the level of water-proof and dust-proof
| Protection Class I: the fitting must be earthed
| Protection Class II: the fitting is doubled insulated and does not require earthing
| Protection Class III: the fitting is low voltage
| Minimum distance from lighted objects (meters)
| The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
| The armature is designed to work only with the indicated voltage. Different items require different working voltage.
| The luminaire can be used in combination with a dimmer
| The reference light angle and light space of the luminaire
| This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste - Take note of the symbols when connecting wires:
| L| Live conductor
---|---|---
**| Earth conductor
N**| Neutral conductor
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>