KRAFTWERK PT800 Trolleys User Manual
- June 3, 2024
- KRAFTWERK
Table of Contents
User Manual
101.415.000
101.417.000
PT800 Trolleys
Thank you for choosing Kraftwerk. We recommend that you take some time to get
to know your tool trolley by reading this manual. The more that you know about
your tool trolley, the greater the safety and pleasure you will get from
working with it.
Note: This manual describes product features and options available
throughout the range of available models, sometimes even before they are
generally available. It may describe options not fitted to the tool trolley
you have purchased.
Note: Some o f the illustrations in this manual may show features as used
in different models, so it may appear different t o you on your tool trolley.
Assembly
-
Caster installation (figure 1 )
Turn the tool trolley downside-up. Caution! Do not lift the entire trolley on the handle! If required, use a helping hand to tip the trolley on the cardboard.. Use the cardboard packaging on the floor to prevent the trolley of getting scratched or damaged.
Assemble the caster wheels with brakes on the handle side, each with 4 x delivered M8 screws. Follow the same steps for the fixed wheels on the handle- opposite side. Tighten the screws with ~ 24 Nm.
-
Maintenance and additional info
Perdiodically [twice a year) tighten all hardware as well as lubrication of ball – bearing-rails
Lubricate the lock with graphite grease -
In case of necessity to remove a drawer, open the drawer completely and press the plastic levers on each side as shown in the picture, and carefully tear the drawer out. When reinstalling, please pay attention not to skew the drawer to prevent the ball bearing rails of getting damaged.
Spare parts & support:
KRAFTWERK Industry GmbH & Co. KG
Gewerbegebiet Stid 4
DE 39443 Stassfurt OT Forderstedt
Documents / Resources
|
KRAFTWERK PT800
Trolleys
[pdf] User Manual
PT800, PT1000, PT800 Trolleys, PT800, Trolleys
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>