Alpha Profssional Tools ESC-125 Electric Wet Dry Stone Cutter Instruction Manual
- September 23, 2024
- Alpha Profssional Tools
Table of Contents
Alpha Profssional Tools ESC-125 Electric Wet Dry Stone Cutter
Product Information
This electric wet/dry stone cutter is designed for cutting various types of stone materials both in wet and dry conditions. It is suitable for professional and DIY use.
Specifications
- Power: 7.0A (120V), 3.5A (220V)
- Input Voltage: 120 Volts
- Power Consumption: 1200W
- Speed: 12,000 RPM (120V), 4.0 kgs (230V)
- Weight: 8.9 lbs (125mm), 4.0 kgs (ESC-225)
- Blade Diameter: 125mm (ESC-125), 22.23mm (ESC-225)
Safety Instructions
- Read the owner’s manual carefully to understand the tool’s applications, limitations, and potential hazards.
- Keep the work area clean to prevent accidents.
- Avoid using the tool in dangerous environments with flammable liquids or gases.
- Keep children and visitors away from the work area.
- Do not force the tool beyond its designed capacity.
- Wear proper apparel including rubber gloves, non-skid footwear, and protective clothing.
- Always wear proper eye protection conforming to ANSI/ISEA Z87.1 standards.
- Use proper ear protection conforming to ANSI S12.6 standards.
- Use proper respiratory protection approved by NIOSH/OSHA for dust exposure.
Product Usage Instructions
Wet Use
- Fill the appropriate reservoir with water according to the tool’s instructions.
- Turn on the stone cutter and slowly guide it through the wet material, ensuring a steady and controlled movement.
- Keep the work area well-lit and free from obstacles to maintain safety.
Dry Use
- Ensure the work area is free from water or moisture before starting the dry cutting process.
- Follow the same cutting procedure as wet use, but without the need for a water reservoir.
- Clean the tool thoroughly after dry use to remove any residual dust or debris.
Frequently Asked Questions (FAQ)
-
Q: Can this stone cutter be used for cutting tiles?
A: Yes, this stone cutter is suitable for cutting various types of stone materials, including tiles. -
Q: What is the recommended maintenance schedule for this tool?
A: Regularly clean the tool after each use, check for any loose parts, and ensure the blade is sharp for optimal performance.
SPECIFICATIONS
INTRODUCTION
Thank you for purchasing the Alpha® ESC-125/ESC-225 Electric Wet/Dry Stone Cutter. Please read this instruction manual thoroughly to ensure safe and correct use of the electric wet/dry stone cutter. Keep this manual in a place where operators can access it easily whenever necessary.
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classified
into “DANGER”, “WARNING” and “CAUTION”.
- DANGER! – Death or serious personal injury is imminent when handling this electric wet/dry stone cutter incorrectly.
- WARNING! – There is a possibility of death or serious personal injury when handling this electric wet/dry stone cutter incorrectly.
- CAUTION! – There is a possibility of personal injury or property damage when handling this electric wet/dry stone cutter incorrectly.
- NOTE: In some situations, failure to observe
- WARNING notes could result in death or serious personal injury. Be sure to read and observe the safety notes to ensure safety and correct use of the electric wet/dry stone cutter.
SAFETY INSTRUCTIONS FOR POWER TOOLS
-
Know Your Power Tool. Read owner’s manual carefully. Learn its applications and limitations as well as specific potential hazards particular to this tool.
-
Keep Work Area Clean. Cluttered areas and benches invite accidents.
-
Avoid Dangerous Environments. Keep work areas as dry as possible. Do not use tool in presence of flammable liquids or gases. Keep the area well lit.
-
Keep Children and Visitors Away. All visitors should be kept a safe distance from the work area. Keep out of reach of children.
-
Don’t Force Tool. It will do the job better and safer at the rate for which it was designed.
-
Wear Proper Apparel. Do not wear loose clothing or jewelry as it can get caught in moving parts. Rubber gloves and insulated non-skid footwear are recommended. Wear protective covering to contain long hair.
-
Wear Proper Eye Protection. All users and bystanders must always wear proper personal eye protection which conform with ANSI/ISEA Z87.1 (CAN/CSA Z94.3). Also, use a face or dust mask if operation is dusty. Always wear certified safety equipment.
-
Wear Proper Ear Protection. All users and bystanders must wear proper personal ear protection which conforms with ANSI S12.6 (S3.19) hearing protection.
-
Wear Proper Respiratory Protection. All users and bystanders must wear proper personal respiratory protection. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, polishing and other construction activities contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:- Lead from lead-based paints
- Crystalline silica from bricks, cement and other masonry products, and
- Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure, work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. To familiarize with the risks associated with a material, consult with your employer, manufacturer/supplier and government agencies regarding the hazards of the materials and their recommendations to protect yourself.
-
Don’t Abuse Water Supply Hose. Don’t carry tool by supply hose or expose to traffic areas where it can be crushed.
-
Always Secure Work Piece. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool.
-
Don’t Overreach. Keep proper footing and balance at all times.
-
Disconnect Tools When Not In Use. Always disconnect tool before servicing and when changing accessories.
-
Remove Adjusting Keys And Wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
-
Maintain Tools With Care. Keep tools clean at all times for best and safest performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean and free of oil or grease. Inspect moving parts for alignment and binding as well as for breakage and improper mounting.
-
Avoid Accidental Starting. Do not carry a “connected” tool, or make adjustments, or change discs without making sure the tool is disconnected from the air supply.
-
Use Only Recommended Accessories. The use of any accessories other than what is listed or recommended for this particular tool may be hazardous.
-
Keep Hands Away From All Moving Parts.
-
Use Side Handles. Supplied with tool for control and safety.
-
Stay Alert. Watch what you are doing and use common sense. Do not operate tool when you are tired, or under the influence of drugs, alcohol or medication.
ADDITIONAL PRECAUTIONS FOR USING THE ELECTRIC WET/DRY STONE CUTTER
In addition to the general safety notes described on the preceding pages,
please read and observe the following precautionary notes before using the
electric wet/dry stone cutter.
- Keep water line clear from working range of the machine. This line should always lead away from you and behind the operating area.
- Before use, check the machine, hose and fittings for any damage or material fatigue. Only authorized service agents should carry out repairs.
- Only use saw blades whose permitted speed is at least as high as the highest no-load speed of the machine.
- Be sure saw blade fits the tool properly and securely. Do not modify the tool to force fit the blade. For example, do not remove blade guard.
- Check blades before use. The saw blade must be properly mounted and turn freely. Perform a test run for at least 30 seconds without any load. Do not use damaged, out of round or vibrating blades.
- Immediately switch off the machine in case of considerable vibrations or if other malfunctions occur.
- Always use and store the saw blades according to the manufacturer’s instructions.
- The flange bolt must be tightened before starting to work with the machine.
- The work piece must be secured if it is not heavy enough to prevent movement.
- The tool is designed for cutting on horizontal surfaces.
TOOL SET-UP INFORMATION
STRAIGHT CUTTING BLADE INSTALLATION:
CURVE CUTTING BLADE INSTALLATION
DUST GUARD INSTALLATION (DRY USE ONLY)
VACUUM HOSE INSTALLATION (DRY USE ONLY)
INSTALLING THE WATER ATTACHMENT (WET USE)
INSTALLATION OF EASYON-EASYOFF SLEEVE
CONNECTING TO THE WATER SUPPLY (1)
CONNECTING TO THE WATER SUPPLY (2)
MAINTENANCE
CARBON BRUSH REPLACEMENT
OPERATION
GROUND FAULT CIRCUIT INTERRUPTER
SWITCHING ON AND OFF
SUPPLYING THE WATER FLOW
ADJUSTING THE CUTTING DEPTH
FREE-HAND CUTTING
USING THE TT RULER
CARRIAGE ASSEMBLY AND GUIDE RAIL
CURVE CUTTING APPLICATION
NOTE: STEP-CUTTING RECOMMENDED
We reserve the right to make modifications within the framework of technical progress!
www.FlooringSupplyShop.com
Tell 323-731-8453
103 Bauer Drive, Oakland, NJ 07436
800-648-7229
Fax: 800-286-0114
www.alpha-tools.com
Copyright © 2020 Alpha Professional Tools. All rights reserved.
CE Declaration of Conformity
We declare under our sole responsibility according to EMC 2004/108/EC, the Low
Voltage Directive 2006/95/EC and Machinery Directive 2006/42/EC, that this
product is in conformity with the following standards or standardization
documents.
Product: Electric Stone Cutter
Model: ESC-125/ESC-225
Applied harmonized standards
EN61000-3-3/+A2:2005,EN55014-
1:2006,EN55014-2/A1:2001,EN61003-3-11:2006,EN60745-1:2009.
Alpha Professional Tools® 103 Bauer Drive, Oakland, NJ 07436
To view the ESC-125/225 Parts List and Schematics, visit us on the web at www .alpha-tools.com
References
- Alpha Professional Tools
- Tools.com – tools.com International LLC
- Alpha Professional Tools
- Flooring & Flooring Supplies | Flooring Supply Shop