BOSCH BMCT-RZ Smart Home Aktor Funk Repeater User Manual
- September 21, 2024
- Bosch
Table of Contents
BOSCH BMCT-RZ Smart Home Aktor Funk Repeater
Specifications
- Product Name: BMCT-RZ
- Model Number: 8-750-002-900 | V001
- Brand: Bosch Smart Home
Product Description
The BMCT-RZ is a relay suitable for switching lamps/lights and other electrical devices.
Safety Instructions
- Before installing or commissioning, read the complete user manual.
- Keep the user manual in a safe place throughout the service life.
- Installation and work on the 230 V network must be done by an electrician.
- Device is not a toy; keep away from children and packaging materials.
- Device may be used by children from 8 years old under supervision.
- Do not modify the device for safety and approval reasons.
- Avoid using the device if visibly damaged; contact service team if in doubt.
- Operate indoors only, avoid exposure to moisture, extreme temperatures, and mechanical stress.
- Use original components and recommended products from Bosch partners.
Product Overview
The relay is designed for switching lamps/lights and other electrical devices. It should be used in accordance with safety instructions and the user manual.
Mounting Instructions
Follow the provided mounting instructions in the user manual. Ensure proper installation to avoid hazards or damage.
Installation
Installation should be carried out by a qualified electrician. Connect the relay according to the wiring diagram provided in the manual.
Start-up/Pairing
To start up or pair the relay, follow the pairing instructions provided in the user manual or associated app.
Resetting to Factory Settings
If needed, reset the relay to factory settings by following the reset procedure outlined in the user manual.
Maintenance and Cleaning
Regular maintenance is not required for the relay. Clean the device gently with a dry cloth if needed, ensuring it is disconnected from power.
FAQ
- Q: Can children use this device?
- A: Children from 8 years old can use the device under supervision as long as they have been instructed in its safe use.
- Q: What should I do if the device is visibly damaged?
- A: Avoid using the device if it has visible damage. Contact the service team for assistance.
Product description
The product is suitable for switching lamps/lights and other electrical devices.
Description of the symbols
Safety instructions
- Before installing or commissioning the device, please also be sure to read the complete user manual to ensure proper use and to comply with the warranty conditions.
- Keep the user manual in a safe place throughout the entire service life of the device.
- The installation of this device and work on the 230 V network must only be carried out by an electrician.
- The device is not a toy! Do not allow children to play with it. Never leave the packaging material lying around unattended. Plastic film and small parts may pose a danger to children.
- This device may be used by children from 8 years of age and by persons with reduced physical, sensory or mental capacities, or a lack of experience and knowledge provided these persons are supervised or have been instructed in the safe use of the device, and understand the corresponding risks.
- When remotely or automatically controlling a device, it is not always possible to guarantee that commands are actually executed or that the correct device status is displayed in the app and on other Smart Home display devices because of external circumstances. This may lead to material damage and/or personal injury. Therefore, you must ensure to the greatest extent possible that no person is endangered at the time of remote operation or automated control. Please take special care when setting up r adjusting the remote control or when using the automated control and check the desired functionality at regular intervals.
- The device is not suitable for all-pole disconnection of the power supply.
- For safety and approval reasons (CE/UKCA), the device may not be modified and/or no changes may be made to the device without authorisation.
- We accept no liability for material damage or personal injury which is caused by improper use or by not observing the safety instructions. In these cases, any guarantee claim becomes void! We accept no liability for consequential damage.
- Do not use the device if it has damage visible from the outside, for example, to the housing, control elements or connection sockets, or if it has a malfunction. If in doubt, please contact our service team.
- Do not open up the device. It does not contain any parts to be maintained by the user. If a fault occurs, have the device checked by a specialist.
- Only operate the device indoors and do not expose it to moisture, vibrations, constant sunlight or other sources of heat, extreme cold temperatures and mechanical stress.
- Only use the device together with original components and recommended products from Bosch partners.
Notes
- The range within buildings can deviate greatly from the range in open spaces. In addition to the transmitting power and the receiving properties of the receiver, environmental factors such as humidity, as well as the local structural situation, play an important role.
- The device is only suitable for use in residential environments.
- The device is only intended for private use.
Product Overview
Item Name
- System button
- Status LED
- Terminals
- Potential-free contact
Mounting instructions
- The standards and directives applicable in your country must be observed during planning, set-up, operation and maintenance.
- The device is part of the building installation. Operation of the device is only permitted on a 230 V/50 Hz AC mains. Work on the 230 V network may only be carried out by an electrician. The applicable accident prevention regulations must be observed here.
- To avoid an electric shock on the device, please switch off the mains power. Failure to observe the installation instructions may result in fire or other hazards.
- Mounting must be carried out following the applicable requirements. Failure to observe the requirements may result in damage to property and/or injury, or even danger of death.
- Please also note any additional information on the product.
- The product is only intended for fixed installation in in-wall switch boxes with a minimum depth of 50 mm and a screw distance of 60 mm in indoor areas.
- When connecting the device terminals, ensure that permitted wires and wire cross sections are used.
- The power circuit to which the device and the load are connected must be secured with a circuit breaker in accordance with EN 60898-1 (trigger characteristics B or C, max. 16 A rated current, min. 6 kA breaking capacity, energy limitation class 3). Installation guidelines in accordance with the applicable national standards – e.g. VDE 0100, HD 384 or IEC 60364 – must be observed. The circuit breaker must be easily accessible for the user and labelled as a disconnecter for the device.
- The consumers connected to the relay outputs must have sufficient insulation.
- Observe the technical data, in particular the maximum permissible switching power of the relay and the type of consumer to be connected, before connecting a consumer. The device should only be loaded to the specified power limit. Overloading may result in destruction of the device, fire or an electrical accident. Among other things, reliable switching off of the connected consumer cannot be guaranteed. ݅ A 230 volt alternating current power supply is required for this product (there must be a phase and neutral conductor).
Installation
- Before you start: Be sure to shut off the power circuit breaker!
- The device can be used to switch lamps/lights and other electrical consumers. Connect the module in accordance with the following connection diagram:
Relay connection diagram
Connection
- L External conductor
- N Neutral conductor
- S1 Button/switch
- ↑L Switching input
- ↓ Switching output
Ensure that the terminal area does not come into contact with the metal parts of the installed device. The module may only be used outdoors with suitable protective housings. If the module is connected correctly, switch the fuse back on.
Start-up/pairing
Ensure that you have a Bosch Smart Home controller and the Bosch Smart Home app and have successfully configured both. Now start the Bosch Smart Home app and select “Add new device”. Follow the instructions in the app. Once the module has been switched on via the fuse, it is in pairing mode for 3 minutes. Pairing mode can be started on an unlinked module by pressing the system button (1) again or a connected switch (S1). ݅ You can also view the explanatory videos and additional information on our website for further help with mounting, installing, starting up and restoring the factory settings on your Bosch Smart Home relay:
The status LED (2) shows the status of the relay module using flashing codes.
Status LED flashing sequence|
Device status
|
Recommended action
---|---|---
Flashes orange
| Pairing mode (is active) or device is
communicating with the
controller
|
Please wait
Flashes green| Pairing mode (successful) or process confirmed|
–
Flashes red
|
Pairing mode (not successful) or process failed
| If this is the first pairing attempt,
please try again. Otherwise reset the device to the factory settings and contact the service department if necessary.
Resetting to factory settings
You can reset the device to its factory settings as follows: Press the system button (1) and hold it for approx. 4 seconds until the status LED (2) flashes orange rapidly. Release the system button briefly and press and hold it again until the LED lights green. The device then restarts. Please note that it can take a few seconds until the module is ready for operation again.
- ݃WARNING Risk of electric shock. Follow the rules for live working. Press the system button only with an insulated tool in accordance with EN IEC 60900. Not observing these instructions can result in death or severe injuries. Work on the 230 V network may only be carried out by an electrician. ݅ When resetting to factory settings, the settings and information are only lost from the device and not from the Bosch Smart Home controller. ݅ To re-configure the device, first delete it in the device management section of the Bosch Smart Home app and then add it again in the usual pairing process.
Maintenance and cleaning
The device does not require maintenance. Leave any repairs to a specialist. Simplified declaration of conformity Robert Bosch Smart Home GmbH hereby declares that the radio equipment type Bosch Smart Home BMCT-RZ corresponds with the directive 2014/53/EU. The complete text of the EU declaration of Conformity is available via the following web address:
Robert Bosch Smart Home GmbH hereby declares that the radio system type BMCT- RZ complies with Regulation 2017. The full text of the declaration of conformity is available at the following internet address: https://gb- doc.bosch.com
Environmental protection and disposal
this product must be disposed of separately from general household waste. As an end user, you are obligated to dispose of the product via separated waste collection, for instance by passing it to an official collection point, in line with the relevant national regulations. By collecting waste separately, you are making a valuable contribution to protecting the environment and human health. This is because, by treating old equipment properly, on one hand, the potentially negative effects associated with the presence of hazardous substances are prevented and, on the other hand, raw materials are conserved through their recovery. Please also note that the avoidance of waste is an even more valuable contribution to environmental protection. Wherever possible, as well as finding a further use for the device yourself or having it repaired, passing the device to a second user is also an ecologically valuable alternative to disposal. It is also possible to return these to the place you bought the product from, provided the distributor offers a returns service voluntarily or is legally obligated to do so.
Open source software
This Bosch Smart Home product uses open-source software. License information for the components used can be found in the attached documents.
Technical data
| Device type designation | BMCT-RZ |
|---|---|
| Degree of protection | IP20 |
| Protection class | II |
| Device protection | Thermal cutoff |
| Ambient temperature | – 25 °C … + 50 °C |
| Housing dimensions (W × H × D) | 40.5 × 47 × 22 mm |
| Weight | 40 g |
| Radiofrequency band | 2.4 – 2.4835 GHz |
| Radio protocol | ZigBee 3.0 |
| Max. transmitting power | 10 dBm |
| Radio range in the open | < 70 m |
| Software class / receiver category | A / 2 |
| Supply voltage | 230 VAC/50 Hz |
| Power consumption in sleep mode | < 1 W |
| Cable type and cross section | Rigid and flexible cable, 0.75 – 2.5 mm² |
Max. switching power:
Relay contact voltage 230 VAC / 50 Hz
| 4 A, cos ϕ 0.85~1
| 1.7 A / 400 VA
| 13 A / 2,990 W
Relay contact voltage DC
Resistive loads| 3 – 24 V / max. 8 A
Inductive/capacitive loads| The inrush current of these load types must not
exceed the value already specified for resistive loads.
Technical modifications reserved
Symbol Description
Service Information
- Robert Bosch Smart Home GmbH
- Schockenriedstraße 17
- 70565 Stuttgart-Vaihingen
- Germany
- service@bosch-smarthome.com
- www.bosch-smarthome.com/service
References
- Control4 Smart Homes
- Welcome to Bosch Smart Home Service | Bosch Smart Home
- Declarations of Conformity and International Type Approvals
- bosch-smarthome.com/rom/relay
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>