ADVANCED ORTHO APEX LSO2 Back Support Instructions
- September 16, 2024
- ADVANCED ORTHO
Table of Contents
APEX LSO2 Back Support
“`html
Product Information
Specifications:
- Product Name: APEX LSO2 Back Support 39/51
- Order#: 5039
- Size: Universal Fit
Product Features:
- Location: Universal Fit
Product Usage Instructions
How to Apply:
-
Lay the brace out flat with the exterior viewing facing up.
Open flap and remove both side panels as well as the abdomen
panel. -
The size indications are marked on each panel. You can cut the
brace with scissors at your appropriate size or simply fold the
excess fabric and tuck it under the back of the panel. -
Attach the side panel to both the left and right side on the
sizing panels. -
Position the back support around your waist and make sure the
back panel is placed over the center of your lower back. -
Place the left panel securely over your abdomen and place the
right panel over the left panel. -
Place the abdomen panel inside the front panel over abdomen and
just below your sternum. -
Now that the brace is secure over your body, pull each of the
compression straps simultaneously until proper compression is
achieved.
Care Instructions:
Remove the rigid components. The rigid components can be wiped
clean with a damp cloth. Soft goods can be hand washed in warm
water with a mild detergent. Triple rinse and air dry. Avoid
twisting the material to remove water.
Note: Your practitioner is familiar with your
specific medical condition and is using this product as part of
your total care. Make sure to follow their directions exactly, even
if they do not match the directions below.
Caution: The application instructions listed
above are intended for the use of qualified professionals only. It
is not recommended for patients attempt to apply or adjust this
device unless otherwise instructed to do so by an orthopedic
professional.
Suggested HCPCS Code:
Part # 5039: L0639/L0651
Advanced Orthopaedics, Inc. 326 Main Street Harleysville,
PA 19438
800.270.7074
info@advanced-orthopaedics.com
FAQ
Can I adjust the size of the brace?
Yes, you can cut the brace with scissors at your appropriate
size or fold the excess fabric under the back panel.
How should I clean the brace?
You can wipe clean the rigid components with a damp cloth and
hand wash soft goods in warm water with a mild detergent.
“`
·?. . . _ -…..’!!
OADRVTAHNOCED
advanced-orthopaedics. com
Application Instructions
Product: APEX LSO2 Back Support 39/51 FEATURES:
· Easy to use universal sizing system
· Adjustable pull tabs to allow optimal compression
· Breathable fabric allows air flow to keep patients cool and dry over long
periods of time
· A dded strength with the abdomen panel with increased stability
Order# 5039
Location Universal Fit
HOW TO APPLY:
1. Lay the brace out flat with the exterior viewing facing up. Open flap and
remove both side panels as well as the abdomen panel.
2. The size indications are marked on each panel. You can cut the brace with scissors at your appropriate size or simply fold the excess fabric and tuck it under the back of the panel.
3. Attached the side panel to both the left and right side on the sizing panels.
4. Position the back support around your waist and make sure the back panel is placed over the center of your lower back.
5. Place the left panel securely over your abdomen and place the right panel over the left panel.
6. Place the abdomen panel inside the front panel over abdomen and just below your sternum.
7. Now that the brace is secure over your body, pull each of the compression
straps simultaneously until proper compression is achieved.
CARE INSTRUCTIONS: Remove the rigid components. The rigid components can be
wiped clean with a damp cloth. Soft goods can be hand washed in warm water
with a mild detergent. Triple rinse and air dry. Avoid twisting the material
to remove water.
Note : Your practitioner is familiar with your specific medical condition and
is using this product as part of your total care. Make sure to follow their
directions exactly, even if they do not match the directions below.
CAUTION: The application instructions listed above are intended for the use of qualified professionals only. It is not
recommended for patients attempt to apply or adjust this device unless otherwise instructed to do so by an orthopedic
professional. Any questions regarding further adjustment or frequency/ duration of wear should be directed to your
orthopedic professional, as they know the individual
condition for which this device was prescribed. SUGGESTED HCPCS CODE:
Part # 5039: L0639/L0651
Advanced Orthopaedics, Inc. 326 Main Street Harleysville, PA 19438 800.270.7074 info@advanced-orthopaedics.com