LiFE v01 9 In 1 Grooming Kit Instruction Manual
- September 13, 2024
- LIFE
Table of Contents
LiFE v01 9 In 1 Grooming Kit
IMPORTANT SAFETY INSTRUCTIONS
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the machine:
WARNING: This sign warns you of dangers to your health and indicates possible
injury risks.
CAUTION: This sign refers to possible hazards to the machine or other objects.
NOTE: This sign highlights tips and information
-
The appliance is designed exclusively for domestic use and for the envisaged purpose. This appliance is not fit for commercial use.
-
This appliance may be used by children from the age of 8 years and over and by persons with limited physical, sensory or mental abilities or by persons without experience and knowledge, provided that they use it under supervision or have been instructed concerning use of the appliance in a safe way and understand the risks involved.
-
Cleaning and maintenance of the appliance by the user should not be done by children unless they are under supervision.
-
WARNING: Keep the appliance dry.
-
To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or any other liquid.
-
WARNING: Do not use any power adapter other than the one provided to recharge the battery.
-
The power adapter is only suitable for use in dry areas.
-
Ensure that the voltage indicated on the appliance rating label corresponds to the voltage in the mains and the polarity of the power adapter match the information on the connected appliance.
-
Do not touch the power adapter with wet hands.
-
Do not place the appliance on or near flammable materials, radiators, ovens or other heat sources.
-
Before cleaning, storing and adding/ removing components, switch off the appliance and unplug it.
-
Do not charge the appliance in the vicinity of bathtubs, sinks, or other vessels containing water. Risk of electric shock!
-
If the appliance accidentally falls into water, disconnect the power adapter from the wall socket immediately. Risk of electric shock!
-
Charge the appliance in a cool and dry location (with temperature between 15°C and 35°C).
-
Do not operate the appliance without supervision. If you should leave the workplace, always unplug the appliance.
-
Disconnect the appliance from the power supply before cleaning.
-
Ensure that the cable of the power adapter does not become kinked, jammed, driven over or come into contact with heat sources.
-
Do not use a damaged power adapter.
-
Keep the power supply dry. Risk of electric shock!
-
Do not attempt to repair the appliance by yourself. Contact a qualified technician.
-
Periodically check the cable for damage.
WARNING: Do not operate the appliance with a damaged cord. In order to avoid the risk of an electric shock, never try to repair the appliance by yourself. Bring it to the authorized service station for repair. Use only the original spare parts. -
CAUTION: Risk of electric shock or fire!
• Do not disassemble the appliance.
• Do not use additives or other components not supplied by the manufacture -
Do not let children play with the appliance.
-
In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
WARNING: Do not allow children to play with the foil. Danger of suffocation! -
If the connection cable of this appliance has been damaged, it must be replaced by an equal one, only by a qualified technician.
-
WARNING: Do not use the appliance if the clipper head is damaged. Risk of injury!
-
Never remove/attach an attachment during operation.
PARTS IDENTIFICATION
- Full size trimmer
- Precision trimmer
- Nose/ear trimmer
- Micro shaver
- 4 cutting guides with adjustable cutting length 3, 6, 9, 12mm
- ON/OFF button
- Charging indicator light
- Comb
- Power adapter
- Storage base
- Lubricating oil
- Cleaning brush
BEFORE FIRST USE
- Read all instructions carefully and keep them for future reference.
- Remove all packing materials and keep them away from children.
- After unpacking the appliance, check for possible damage. In the event of a fault or visible problem, do not use the device and contact the store where you purchased it.
- It is recommended that you clean the appliance as described in the “Cleaning” section.
- Ensure that the voltage indicated on the appliance rating label corresponds to the voltage in the mains.
- Make sure that the appliance only plugs into a properly grounded and properly installed socket.
- Charge the appliance for 8 hours.
DEVICE CHARGING
- To charge the appliance, connect the power adapter to the appliance, and connect it to the mains. When charging starts, the charge indicator light comes on.
- After 8 hours of full charge, the appliance is ready for use. Unplug the power supply from the appliance and the power outlet.
NOTE
- Recharge the battery regularly according to the usage time.
- Recharge the battery once in every month if the hair clipper is not in use for longer period.
- To maintain the battery life of the device, it is recommended to let the battery run out every six months and then fully charge it for 14-16 hours.
HOW TO USE
- The device has Direct-Drive function that allows you to use the hair clipper by direct connection into the mains even if the battery is fully discharged.
- The hair clipper can be used with or without the included barber combs. To use the hair clipper with barber comb choose the trimming size as per your requirement. To adjust the trimming size you need to slide it up and down along the blade. You can select 4 different sizes 3, 6, 9 or 12 mm (“INSTALLATION AND REMOVAL OF COMPONENTS”.)
- The combs should be adjusted while the hair clipper is in “OFF” mode.
- After use, switch off the device.
INSTALLATION AND REMOVAL OF ACCESSORIES
INSTALLATION AND REMOVAL OF TRIMMERS
To install a trimmer head, first insert the plastic part on the head into the
body of the device by aligning it with a locking point and then fasten it
correctly until it locks into place (Fig.3-4) .
To remove a head, push upwards and remove the head from the body of the device.
INSTALLATION AND REMOVAL OF CUTTING GUIDES
To install one of the cutting guides, first attach the front to the head
blades and then fasten the back part.
To remove the cutting guide, press the down arrow with your thumb and pull up to remove the guide.
INSTALLATION AND REMOVAL OF A MICROCUTTING GUIDE HEAD
Press the two sides and fasten to the body of the head. Squeeze both sides of
the part and remove it from the head body.
INSTALLATION AND REMOVAL OF CUTTING GUIDE FOR DETAILS
Position the cutting guide from top to bottom until it snaps into the micro-
cutting head. Select 4 different cutting levels by adjusting the comb up and
down.
HOW TO USE
HAIRCUT
- Attach the full size trimmer to the body of the device.
- Attach the cutting guide of your choice on the head following the instructions above.
- Turn on the appliance by pressing the ON/OFF button.
- Slowly move the device through the hair. Repeat the same movement in all the different directions.
- When you finish the haircut, turn off the appliance by pressing the ON/OFF button.
- Remove the cutting guide and the cutting head.
NOTE : Regularly remove cut hair from the cutting guide. If a lot of hair accumulates, remove the cutting guide from the appliance and clean it.
FACIAL TRIMMING
- Attach the precision trimmer to the body of the device.
- Place the cutting guide on the head.
- Adjust the level of the cutting guide to set the desired length.
- Turn on the appliance by pressing the ON/OFF button.
- Start with the tip of the beard line and gently lower the cutting blade to your skin. Move to the edge of the beard line to cut the desired positions in the face area, away from the beard in the neck area.
- When the facial trimming is completed, turn off the appliance by pressing the ON/OFF button.
- Remove the cutting guide and the precision trimmer.
SHAVING WITH THE MICRO SHAVER
- Pre-trim the contours you want to shave with the full size trimmer (without cutting guide) or with the micro-shaving head. Then attach the micro-shaver on the body of the device.
- Press the ON/OFF button and gently press the micro-shaver onto the skin at a 45° angle and shave along the contours to remove the hairs.
- Once shaving is completed, press the ON/OFF button again to turn off the appliance.
- Remove the head and clean it before storing it (see section “CLEANING”).
FACIAL TREATMENT (Nose. Ears)
- Attach the nose/ear trimmer on the body of the device
- Insert the tip of the tip of the trimmer into one of your nostrils (not more than 6mm) while simultaneously rotating it to remove unwanted hairs.
- Turn on the device by pressing the ON/OFF button.
- When the facial treatment is completed, press the ON/OFF button again to turn off the device.
- Remove the nose/ear trimmer head and clean it before storing it (see section “CLEANING AND MAINTENANCE”).
CLEANING AND MAINTENANCE
- WARNING: Turn off the appliance before cleaning. Disconnect the power adapter from mains.
- Do not submerge the appliance in water! Risk of electric shock!
- Do not immerse the power adapter in water! Risk of electric shock!
- CAUTION: Do not clean the appliance under running water! The electronics parts could get damaged.
- Do not use a wire brush or other abrasives.
- Do not use sharp or abrasive cleaning agents.
- Use the cleaning brush to remove remaining hair after use.
- Clean the housing of the appliance with a slightly damp cloth, if necessary.
- Always clean the power adapter with a dry cloth.
- Regularly apply 1-2 drops lubricating oil onto the blades of the clipper head.
STORAGE
- Always unplug the power cord before storing the appliance.
- Make sure the appliance is cold and dry before storage.
- Always store the appliance away from children.
- Always store the appliance in a safe and clean place. For the best protection of the appliance, store it in its original packaging.
DISPOSAL OF APPLIANCE AND ACCESSORIES
This symbol appearing on the product, its accessories or accompanying manuals
indicates that the product and its electronic accessories should not be
disposed of with other household trash.
In order to avoid possible harmful effects on the environment or health due to
uncontrolled waste disposal, please separate these products from other types
of waste and recycle them.
Household users should contact either the store where they purchased this
product or their local services for details of where and how they can return
these products for environmentally safe recycling.
DISPOSAL OF BATTERIES
This marking on the battery, manual or packaging indicates that the batteries
of this product should not be disposed of with other household waste at the
end of their life cycle.
Iwviac; KaAoxc.op1, 570 09 8rnaaAoviK17, EMaoa, TH/\. +30 2310 700.777 Ionias
Kalochori, 570 09 Thessaloniki, Greece, TEL. +30 2310 700.777
e-mail: info@sun.gr www.life.gr