SOLBREEZE Dock Boat Table Set Instruction Manual
- September 7, 2024
- SOLBREEZE
Table of Contents
SOLBREEZE Dock Boat Table Set
Specifications
- Product Name: SOLBREEZE Table Set
- Mounting Bolt Size: 7/8 inch
- Socket Size: 33 mm
Product Usage Instructions
Installation Steps:
- Choose the location for your table set.
- Ensure there are no obstructions within a 4-foot radius around the area where you will drill for the flush mount bolt.
- Check both ABOVE and BELOW the deck to confirm no obstructions.
- Once confirmed, use a 7/8 drill bit to drill the hole.
- Insert the flat mount bolt into the drilled hole.
- Under the mounting surface, place the following onto the bolt:
- An anti-slip plate (teeth facing upward) to prevent the bolt from spinning when fastening the table post.
- Locking washer.
- Nut.
- Use a 33 mm socket and ratchet to securely fasten the nut onto the bolt.
- Return to the top of the deck and screw the table post onto the flush mount bolt.
- Place the table top onto the table post.
FAQ
- Q: Can I use a different-size drill bit for installation?
- A: It is recommended to use a 7/8 drill bit as specified for proper installation and stability.
- Q: Do I need any additional tools for assembling the SOLBREEZE Table Set?
- A: Aside from a 33 mm socket and ratchet, ensure you have a drill with a 7/8 drill bit for installation.
Installing the SOLBREEZE Table Set
- Choose the locaƟon for your table set.
- Ensure there are no obstrucƟons within a 4″ radius around the area where you will drill for the flush mount bolt.
- Check both ABOVE and BELOW the deck to confirm no obstrucƟons.
- Once confirmed, use a 7/8″ drill bit to drill the hole.
- Insert the flat mount bolt into the drilled hole.
- Under the mounƟng surface, place the following on to the bolt:
- AnƟ-slip plate (teeth facing upward) to prevent the bolt from spinning when fastening the table post.
- Locking washer.
- Nut.
- Use a 33 mm socket and ratchet to securely fasten the nut onto the bolt.
- Return to the top of the deck and screw the table post onto the flush mount bolt.
- Place the tabletop onto the table post.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>