Maylofi E8910 Active Stylus Pens Quick Start Guide

Maylofi E8910 Active Stylus Pens

Product Overview

Start Using

1. First,Plug the Micro USB cable to The Pen, Then connect Pen to PC or USB charger or Power bank to charge the Pen.
2. Until the LED Indicator lights up in Green, The Pen is full Charged.You can use it Now.
3. Press the Button directly, the LED Indicator lights up in blue, The Pen starts up.
4. The Pen supports most of the Phone, pad, tablet or laptop in the application of writing,painting and other function.
   Notes: Some Model No support.

Turn On/Off

1. First used, or in power off status, to press Button, The Pen will be active in working mode and LED Indicator in blue.Press button again, The Pen will power off and LED Indicator Will be off.

2. The Pen stay in non-written status at power on for 15 minutes, it will power off automatically. Or if battery low, the Blue LED Indicator Will be off,
   The Pen also power off automatically.

3. The Pen stays in power off when charging.

Charging

1. The Pen power off automatically, when battery low and the LED Indicator off.
2. Plug the Micro USB cable to The Pen, and connect the Pen to PC or USB charger.
3. LED Indicator lights up in red, when battery is charging and not fully charged. If battery is fully charged, LED Indicator lights up in green. Disconnect charging cable, LED Indicator is off.

Safety information

This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.

Operating environment

• Avoid dusty, damp, or dirty environments.
• Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.
• Ideal operating temperatures are 0 to 35℃ . Ideal storage temperatures are -10℃ to 45℃ . Extreme heat or cold may damage your device or accessories.
• Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods.
• Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.
• Do not allow children or pets to bite or suck the device or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.

Child’s safety

• Comply with all precautions with regard to children play with the device or its accessories may be dangerous.The device includes detachable parts that may present a choking hazard. Keep away from children.
• The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Accessories

Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area.

Battery Safety

• The device has a built-in, non-removable battery. Do not attempt to remove the battery, otherwise the device may be damaged. To replace the battery, take the device to an authorized service center.
• Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or  radiators. Batteries may explode if overheated.
• Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards.
• If he battery leaks, ensure that the electrolyte does not make direct contact with your skins or eyes. If the electrolyte touches your skins or splashes into your eyes, immediately flush with clean water and consult a doctor.
• In case of battery deformation, color change, or overheating while charging or storing, immediately stop using the device and remove the battery.
• Continued use may lead to battery leakage, fire, or explosion.
• Do not put batteries in fire as they may explode.Damaged batteries may also explode.
• Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire, explosion, or other hazards.
• Do not allow children or pets to bite or suck the battery. Doing so may result in damage or explosion.
• Do not smash or pierce the battery, or expose it to high external pressure. Doing so may lead to a short circuit or overheating.

Specifications

General

• Operating Temperature 5 to 40 degrees C
• Charging Temperature 5 to 35 degrees C
• Storage Temperature -20 to +60 degrees C
• Long-Term Storage Temperature up to 1 month: -20 to +50 degrees C
• up to 3 months : -20 to +40 degrees C

Smart Stylus

• Physical size (L x D) 145 x 9mm(excluding protrusion (Cap))
• Weight 15g (approximate)
• Nib size (D) 1.45mm
• Battery type Li-Polymer battery
• Continuous operation time * 10 hours
• Duration of charging about 1.5 hours

*The actual operating time may vary depending on the usage scenarios and other factors.
For more information, and purchase the Pen, please access our online shop.

Cleaning and maintenance

• Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a microwave oven or hair dryer.
• Do not expose your device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion.
• Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.
• Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene)to clean the device or accessories.These substances may cause damage to parts or present a fire hazard.Use a clean, soft, and dry cloth to clean the device and accessories.
• Do not dismantle or remanufacture the device and its accessories. This voids the warranty and releases the manufacturer from liability for damage. In case of damage, contact an authorized service center for assistance or repair.

Disposal and recycling information

This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal.
For more detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC).The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.

Reduction of hazardous substances

This device is compliant with the REACH Regulation [Regulation (EC) No 1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if included) are compliant with the  Battery Directive (Directive 2006/66/EC).

EU regulatory conformance
Hereby, We declare that this device is in compliance with the essential requirements and other relevant provisions of the following Directives

• RoHS Directive 2011/62/EU
• R&TTE Directive 1999/5/EC
  The following marking is included in the product : Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.

FCC Regulatory Compliance FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an xperienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Caution: Any changes or modifications to this device not expressly approved for compliance could void the user’s authority to operate the equipment.

Limited warranty statement

This warranty is subject to the following terms and conditions:

• The defective unit along with the sales invoice must be brought or sent to the Authorized Service Centre, during normal working hours, by the end customer at his own expense.
• Any defect arising due to misuse of the unit, damages due to liquid ingress, or physical abuse, or normal wear and tear will not be covered by this warranty. Plastic components like front & back covers plus rubber components like key pads, and antenna will not be treated under warranty coverage.
• The warranty is void if the unit is tampered with, altered or repaired by unauthorized persons.
• The warranty is void if the serial number of the unit is deleted, defaced or altered rendering it difficult to identify the instrument.
• There are no customer serviceable parts inside the unit and hence the same should not be opened by the user or any person other than the authorized service personnel. The warranty is void if the warranty seal on the unit is broken.
• Damages caused to the unit, by accidents, lightning, or any other acts of God are not covered by this warranty.
• Whether defective items or components are to be replaced or repaired shall be left to the sole discretion of the Supplier. In case of replacement of a part, the defective part removed from the unit becomes the property of OUR COMPANY.
• EXCEPT FOR THE EXPRESS WARRANTIES SET FORTH ABOVE, WE GRANT NO OTHER WARRANTIES, EXPRESS OR IMPLIED, BY STATUTE OR OTHERWISE, REGARDING THE PRODUCT, FITNESS FOR ANY PURPOSE OR OTHERWISE. We SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER CONSEQUENTIAL DAMAGE, ARISING OUT OF THE USE OF, OR INABILITY TO USE THE PRODUCT OR FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
• The product just can get in warranty service from the country or area where you have purchased it.

FAQs

What is the Maylofi E8910 Active Stylus Pen designed for?

The Maylofi E8910 Active Stylus Pen is designed for precise digital writing, drawing, and interaction with touchscreen devices.

How do I charge the Maylofi E8910 Active Stylus Pen?

To charge the Maylofi E8910 Active Stylus Pen, plug the Micro USB cable into the pen and connect it to a PC, USB charger, or power bank. The LED indicator will turn green when fully charged.

How long does it take to fully charge the Maylofi E8910 Active Stylus Pen?

The Maylofi E8910 Active Stylus Pen takes approximately 1-2 hours to fully charge.

How do I turn on the Maylofi E8910 Active Stylus Pen?

To turn on the Maylofi E8910 Active Stylus Pen, press the button on the pen. The LED indicator will light up blue.

Can the Maylofi E8910 Active Stylus Pen be used with all touchscreen devices?

The Maylofi E8910 Active Stylus Pen is compatible with most capacitive touchscreens, including iOS and Android devices, though some models may not be supported.

What should I do if the LED indicator on the Maylofi E8910 Active Stylus Pen turns red?

If the LED indicator on the Maylofi E8910 Active Stylus Pen turns red, it means the battery is charging. The LED will turn green when the battery is fully charged.

How do I turn off the Maylofi E8910 Active Stylus Pen?

To turn off the Maylofi E8910 Active Stylus Pen, press the button again. The LED indicator will turn off.

What happens if the Maylofi E8910 Active Stylus Pen is not used for a while?

If the Maylofi E8910 Active Stylus Pen is not used for 15 minutes, it will automatically power off.

How do I know when the Maylofi E8910 Active Stylus Pen needs to be charged?

The LED indicator on the Maylofi E8910 Active Stylus Pen will turn off when the battery is low, signaling that it needs to be charged.

What is the operating temperature range for the Maylofi E8910 Active Stylus Pen?

The ideal operating temperature range for the Maylofi E8910 Active Stylus Pen is 0 to 35°C.

How do I clean the Maylofi E8910 Active Stylus Pen?

Clean the tip and body of the Maylofi E8910 Active Stylus Pen with a soft, dry cloth. Avoid using harsh chemicals or immersing the pen in water.

What should I do if the Maylofi E8910 Active Stylus Pen is not working properly?

If the Maylofi E8910 Active Stylus Pen is not working properly, ensure it is fully charged. If issues persist, refer to the troubleshooting section in the user manual or contact customer support.

Download this Manual:Maylofi E8910 Active Stylus Pens Quick Start Guide

Reference Link

Maylofi E8910 Active Stylus Pens Quick Start Guide- Device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>