OANDYS RC03 Magnetic Wireless Charger For iPhone User Manual
- August 31, 2024
- OANDYS
Table of Contents
RC03 Magnetic Wireless Charger For iPhone
“`html
Specifications:
- Product: Wireless Charger
- Package Contents:
- Magnetic Wireless Charger: x1
- Type-C to USB adapter: x1
- User Manual: x1
- Customer Service Card: x1
- Recommended Charger: QC3.0 or PD charger
- LED Indicator: Yes (3 modes)
Product Usage Instructions:
-
To use the wireless charging feature:
- Ensure the smartphone is Qi-enabled or has a Qi-Compatible
cover (sold separately).
- Ensure the smartphone is Qi-enabled or has a Qi-Compatible
-
For fast wireless charging:
- Use a quick charge power adapter.
-
To use MagSafe charging:
- Ensure your smartphone is MagSafe enabled or has a MagSafe
accessory (e.g., magnetic protective case).
- Ensure your smartphone is MagSafe enabled or has a MagSafe
LED Indicator Status:
LED Indicator | Status |
---|---|
3 | The indicator light flashes quickly |
Attention:
For fast and safe charging, it is recommended to use a QC3.0 or
PD charger. Using other adapters may lead to unstable charging or
abnormal flickering.
FAQ:
Q: What type of charger is recommended for this wireless
charger?
A: It is recommended to use a QC3.0 or PD
charger for fast and safe charging. Other adapters may not be
suitable.
“`
Wireless Charger User Manual
Package Contents
Magnetic Wireless Charger: x1 Type-C to USB adapter: x1
Precautions
User Manual: x1 Customer Service Card:x1
For fast and safe charging,t is recommended to use a QC3.0 or PD charger, other adapters may not be suitable for this device, which may cause unstable charging or abnormal flickering.
QC
PD
Working status Connect to power
Standby mode On charging Failure
LED Indicator 3
10 The indicator lightflashes quickly
Instructions
A.To use the wireless charging feature, please make sure you the smartphone is
Qi-enabled or has Qi-Compatiblecover(available separately). B.Please note a
quick charge power adapter is required for the fast wireless charging feature.
C.To use MagSafe charging, please make sure your smart phone is MagSafe
enabled or has a MagSafe accessory(such as a magnetic protective case).
Attention
A. To avoid product damage,please do not drop,knock or disassemble the charger
or stand. B. Please do not use or store the magnetic wireless charger in a hot
or humid environment as doing so may damage internal circuitry. C. Magnets may
interfere with the magnetic charging of the product or cause product to
malfunction;To avoid accidentally interfering with product functioning, please
keep magnetic chip cards (e.g.ID cards,credit cards) or medical devices
(e.g.pulse measuring device,hearing aid)at least 20cm away from the product.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>