Sun Bright Lighting GN7214H Low Voltage Strip Light System User Guide

GN7214H Low Voltage Strip Light System

“`html

Specifications

• Power supply:
  • Input: 100-240VAC 50/60HZ
  • Output: 12V, 2A, 24W
• LED lighting:
  • Input: DC 12V
  • Power: Max. 24W

Product Usage Instructions

Installation

1. Screw the buckles onto the furniture.
2. Fit and snap the LED light bar into the buckles.
3. Connect the connecting wires between the parts.
4. Plug the Power supply plug into the socket.
5. Operate the Remote control to control the light bar (pull out
   the battery insulation before use).

RF Wireless Remote RGB LED Controller Instructions

This remote control offers various functions:

• 22 Dynamic Modes
• 20 Static Colors
• Speed Adjustable
• Brightness Adjustable

Additional functions include Turn On/Standby, Dynamic Mode
Adjustment, Dynamic Speed Adjustment, Static Color Adjustment,
Direct Color Select, Brightness Adjustment, and Demo Mode. The
remote is designed for easy operation and offers direct color
selecting capabilities.

RF Wireless Operation

1. Using Remote Controller: Pull out the battery
   insulate tape before using. The RF wireless remote signal can pass
   through barriers, so it’s not necessary to aim at the main unit
   when operating. For proper receiving remote signal, please do not
   install the main unit in closed parts.

2. Pairing New Remote: The main unit can be
   paired with up to 3 remote controllers. To pair a new remote
   controller, unplug the power of the main unit and plug it back in
   after 5 seconds. Press COLOR-‘ andBRIGHT-‘ keys together within
   5 seconds of plugging in the unit. Pull out the battery insulation
   after power on. The main unit will recognize the new remote
   controller.

3. Free Remote Pairing Mode: In specific cases,
   the main unit may need to be paired with any remote controller.
   Follow the provided instructions for pairing in these
   situations.

Frequently Asked Questions (FAQ)

Q: Can I use multiple LED light bars with one control box?

A: No, each LED light bar should have its own control box for
proper functionality.

Q: How far can the RF remote signal reach?

A: The RF remote signal can pass through barriers and does not
require direct line-of-sight to operate, but it is recommended not
to install the main unit in closed parts for optimal signal
reception.

Q: What should I do if my remote control is not working?

A: Ensure that the battery insulation has been removed, and try
pairing a new remote controller following the provided
instructions.

“`

Low Voltage Lighting Systems User Guide
Please read this user guide before installing and using your Low Voltage Lighting Systems 1THE COMPONENTS LIST

H1

Connect to LED lighting

H2

MODE +

SPEED

DEMO

SPEED +

COLOR MODE BRIGHT

COLOR

BRIGHT

H3

RF Wireless

Connect to power supply

H1> Class 2 power supply—-1 pc; H2> RF control—1 pc; H3> LED control box—1 pc; H4> LED light Bar —1 pcs; H5> Buckle —3 pcs.

H4

H5

2INSTALLATION
1>Screw the buckles onto the furniture.
2>Fit and snap the LED light bar into the buckles.
4>Connect the connecting wires between the parts. 5>Plug the Power supply plug to the socket. 6>Operate the Remote control to control the light bar (pull out the battery insulation before use).
3SPECIFICATIONS
Power supply: Input: 100-240VAC 50/60HZ Output:12V, 2A, 24W LED lighting: Input: DC 12V Power: Max. 24W
4RF wireless Remote RGB LED Controller Instructions

22 Dynamic Modes 20 Static Colors Very Smooth Effects Speed Adjustable Brightness Adjustable

RF Remote Ultra Slim Design Dynamic Demo Mode Easy Remote Pairing Direct Color Selecting

Functions

1.Turn On/Standby

Press this key to turn on unit or switch to standby mode. once power

on, the Unit will automatically turn on and restore to previous status.

2/9. Adjusting Dynamic Mode Switch to dynamic mode from static color, or switch between

1

dynamic modes. 3/10. Adjusting Dynamic Speed

2

Adjust dynamic playing speed. Press SPEED+ to increase speed

and press SPEED- to decrease. The unit will switch to dynamic

3

mode if press this key at static color mode.

4/5. Adjusting Static Color Switch to static color mode from dynamic mode, or switch

4

between static colors. 6.Direct Color Select

5

Shortcut key to static colors. When press the specific color

key, LED will display the same static color. The direct colors

are included in COLOR+’ andCOLOR-‘ operation.

7/8. Adjusting Brightness

Adjust static color brightness, press BRIGHT+ to increase

brightness and press BRIGHT- to decrease.

11.Demo Mode

Press this key will switch to Demo mode. At demo mode, it

displays red green and blue color dynamic modes in loop.

MODE

+ SPEED DEMO SPEED
–

COLOR MODE BRIGHT
+- +

COLOR
–

BRIGHT
–

RF Wireless

Operation

11 10 89 7
6

1.Using Remote Controller Please pull out the battery insulate tape before using. The RF wireless remote signal can pass through barrier, so it’s not necessary to aim at the main unit when operating.

For proper receiving remote signal, please do not install the main unit in closed parts.

2.Pairing New Remote

The remote and main unit is 1 to 1 paired as default. Further

more, main unit can be paired to 3 remote controllers and

each remote controller can be paired to any main unit.

Please do the following steps to pair new remote controller:

1. Plug off the power of main unit and plug in after 5 seconds. 2) Press COLOR-‘ andBRIGHT-‘ key together in 5 seconds

Pull out the battery insulation

after power on.

After this operation, the main unit will recognize the new

remote controller.

Warning: This action cannot be undone!

3.Free Remote Pairing Mode

In some specific cases, the main unit may need to be paired to any

remote controllers, please do following steps for free remote pairing mode:

1. Plug off the power of main unit and plug in after 5 seconds.

2. Press ON/OFF’ andMODE+’ key together in 5 seconds.

After this operation, the main unit will recognize any

remote controller. To pair the main unit back to specific

remote, please repeat the `Pairing New Remote’ operation.

4.Switch Output Color Sequence

The controller’s default output signal sequence is

Common-Green-Red-Blue. If the LED application is in different cable

sequence, the direct color keys will not match the LED color. In this case,

user can adjust the output signal sequence with following steps.

1. Plug off the power of main unit and plug in after 5 seconds,

2. Press RED’ andBLUE’ color key together in 5 seconds after power on.

With this operation, the output sequence will switch between

6 possible combinations, the sequence will be memorized and

it won’t change before next same operation.

Specification

Dynamic mode

22 modes

Static color

20 colors

PWM grade

256 levels

Brightness grade

5 levels

Speed grade

10 levels

Demo mode

Yes

Direct color switchable

Yes

Output color switchable

Yes, 6 options

Working voltage

DC 5-24V

Output current

3×4A peak, 3×2A constant

Remote frequency

433.92MHz

Remote distance

<=6m at open area

5. WARNINGS
1> Don’t connect to non-original power supply. 2> Please install following installation instruction to avoid damage. 3> Indoor use only, working ambient temperature 4°C to 36°C. 4> Dry location uses only; 5> Prevent children or animals from chewing or swallowing parts. 6> Return to the dealer for repair service if abnormal, instead of dismantle. 7> Do not install the LED controller in closed parts. 8> USE ONLY WITH CLASS 2 POWER UNIT. 9> CAUTION: The mounting means provided with this luminaire has not been evaluated for reliability.
If installed where failure of the mounting means could cause injury to persons or damage to property below, supplemental means of securement should be considered.

2

Installing the battery

The battery is supplied with the remote control. The first thing to do with the remote control is to remove

the plastic sheet insulated the battery. For replacement battery, use lithium based CR2025 battery. Please

follow the sequence below to replace the battery.

Take out the battery bracket.

2

PUSH

FIRMLY PRESS THE BUTTON USING A CONE TO RELEASE BATTERY BRACKET

OPEN PUSH

3 OPEN
1
FIRMLY PRESS THE BUTTON USING A CONE TO RELEASE BATTERY BRACKET
Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.

FIRMLY PRESS THE BUTTON USING A CONE TO RELEASE BATTERY BRACKET

LITHIUM BATTERY
CR2025 3V

OPEN PUSH

Press the battery bracket into the remote control, making sure it snaps into position.
FIRMLY PRESS THE BUTTON USING A CONE TO RELEASE BATTERY BRACKET

OPEN PUSH

Turn the remote over and aim it towards the lighting systems unit. If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
Battery Safety Warning

1. Remove and immediately recycle or dispose of used batteries

according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. 2. Even used batteries may cause severe injury or death. 3. Call a local poison control center for treatment information.

NOTE: Battery disposal Please always dispose of batteries at a

4. Compatible battery type: CR2025.

suitable recycling

5. Nominal battery voltage: 3 V.

point.

6. Non-rechargeable batteries are not to be recharged.

7. Do not force discharge, recharge, disassemble, heat above 60°C or incinerate. Doing so may

result in injury due to venting, leakage or explosion resulting in chemical burns.

8. Ensure the batteries are installed correctly according to polarity (+ and -).

9. Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-

zinc, or rechargeable batteries.

10. Remove and immediately recycle or dispose of batteries from equipment not used for an

extended period of time according to local regulations.

11. Always completely secure the battery compartment. If the battery compartment does not close

securely, stop using the product, remove the batteries, and keep them away from children.

WARNING

· INGESTION HAZARD: This product contains a button cell or coin battery.

· DEATH or serious injury can occur if ingested.

· A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

· KEEP new and used batteries OUT OF REACH of CHILDREN.

· Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside

any part of the body.

3

FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>