2BFVM Minimalist Findmy Air Wallet User Manual

2BFVM Minimalist Findmy Air Wallet

Getting Started

1. Power On/ Off:
   • Press your Air Wallet’s Function Button once to turn on, it should beep once indicating it is powered on.
   • To power off, hold the same button for at least 3 seconds. You will hear 2 beeps indicating your Air Wallet is powered off.
2. Check For Updates :
   To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommen­ded. The Find Items app on Apple Watch requires the latest version of watch OS.

Add Your Item Locator

1. Start The App
   • Open Find My app on your supported iPhone or iPad.
   • Allow notifications from the app.
2. Connect Your Air Wallet
   • Power on your Air Wallet.
   • Tap+, then° Add Other ltem”.
   • Once your Air Wallet is located, tap “Connect”.
   • Choose a recognizable name and emoji for your Air Wallet and tap”Continue11
   • Find My will ask for confirmation to add your AirWallet to your Apple ID Tap Agree0.
   • Tap Finish II and your Air Wallet will be set up and ready to be connected to whatever i tern you wish to locate ,e.g. your keys.

Locate Your Item

Find AirWallet When It’s Nearby:

• Open Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
• Tap on your ltem Locator from the list.
• Tap “”Play Sound” to make your ltem Locator beep.
• Tap “Stop Sound” to stop the beeps once you find.

Find AirWallet Last Known Location :

• Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
• Tap on your Air Wallet from the list.
• Your Air Wallet’s last known location will appear on the map.
• To navigate to that last known location, “Directions” to open the Apple Maps app.

Find Item Out Of Range

Enabling “Notify When Left Behind”:

• Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
• Tap on your Air Wallet from the list.
• Under “Notifications” enable the “Notify When Left Behind “toggle.
• You will receive a notification when you leave your Air Wallet behind and it ‘s no longer in range of your device.

Enabling “Notify When Found”:

• Under “Notifications”, enable the “Notify When Found” toggle.
• When your Air Wallet is seen by another Find My enabled device, you will receive a notification of its updated location.
• Note :”Notify When Found” can only be activated when your Air Wallet is out of range.

When Your Item Is Lost

Enabling “Lost Mode”:

• Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
• Tap on your Air Wallet from the list.
• Under “Lost Mode” tap “Enable”.
• A screen detailing Lost Mode will pop up, tap “Continue”.
• Enter your phone number or email address and tap “Next”.
• You may enter a message that will be shared with the person that finds your item.
• Tap “Activate” to enable “Lost Mode”.
• Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
• Note: When” Lost Mode” is enabled, your Air Wallet is locked and cannot be paired to a new device.

Resetting Air Wallet

Remove The AirWallet From Find My App:

• Open Find My app and select the “Items” tab.
• Tap on your AirWallet from the list.
• Please ensure “Lost Mode” is disabled.
• Scroll to the bottom of the screen and tap “Remove ltem.
• A summary will open, tap “Remove” to confirm.

Factory Reset Your AirWallet:

•  After successfully removing the AirWallet from Find My app, press the AirWallet’s function button four times rapidly and then hold it a fifth time until you hear a ringing chime.
• The AirWallet is now reset and ready to be paired to a new device.

Extras

Replace The Battery

• Remove the screws on front of your Air Wallet with a screwdriver
• Replace the batteries with new CR2016 battery placing them negatively up (text facing down) .
• Carefully close the Air Wallet by fastening the screws on both sides. 07.2 Unwanted tracking:

Unwanted tracking

lf any Find My network accessory separated from its owner is seen moving with you over time, you’ll be notified in one of two ways:

1.  If you have an iPhone, iPad, or iPod touch, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
2. lf you don’t have an iOS device or a smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved.

These features were created specifically to discourage people front trying to track you without your knowledge.

The Fine Print

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or Tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOs and watchos are the trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>