UNICRIMP QOE Series Weatherproof Enclosure Owner’s Manual
- August 22, 2024
- UNICRIMP
Table of Contents
UNICRIMP QOE Series Weatherproof Enclosure
Specifications
| Product Reference | QOE834#BLK |
|---|---|
| Material | Glands: Nylon, IP Seal: Silica gel, Body: Polycarbonate |
| Minimum Temperature | – |
| Maximum Temperature | – |
| IP Rating | – |
| Cable Entries | 2x M20 Gland |
| Dimensions | (D)68mm x (W)141mm x (H)37mm |
| Terminals | T85 (0.2-4mm2 wire capacity) |
| Voltage (MAX) | 450V |
| Gland Torque Value | 2.5Nm |
| Lid Screw Torque Value | 1Nm |
| Max Cable Diameter | 8mm |
| Warranty | 1 Year |
Product Usage Instructions
Installation:
- Read the instructions carefully before starting the installation.
- Ensure the enclosure is placed in a suitable location according to the dimensions provided.
- Use the recommended torque values for tightening the glands and lid screws.
- Connect the cables to the terminals as per the wire capacity specified.
- Check the IP rating to ensure proper protection against dust and water.
- Max cable diameter should not exceed 8mm.
- Retain the manual for future reference.
Technical Information:
- The enclosure is made of durable materials such as polycarbonate and nylon for long-lasting performance.
- The maximum voltage capacity is 450V, suitable for various electrical applications.
- The enclosure is equipped with multiple cable entries for easy wiring.
- Follow the guidelines for gland torque value to prevent over-tightening.
- The product comes with a 1-year warranty for peace of mind.
Safety Precautions:
- Ensure all electrical connections are made by a certified professional.
- Disconnect the power source before opening the enclosure.
- Do not exceed the maximum temperature limits specified for safe operation.
- Regularly inspect the enclosure for any signs of damage or wear.
GENERAL INFORMATION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCE.
- Before commencing any electrical work, to prevent the possibility of receiving an electric shock, ensure the mains isolator on the consumer unit is in the ‘OFF’ position and safely isolated in accordance with Best Practice Guide 3.
- Before commencing installation, ensure the fitting is complete with the fixings required (Wall fixings not provided).
- The enclosure will come with pre-fitted glands & a terminal block
- These enclosures are IP68 rated, tested to 1 Metre at 60 Minutes
- The lid MUST be screwed down securely to ensure it achieves an IP68 rating.
QOE834#BLK SPECIFICATIONS
| QOE8342BLK | QOE8332BLK | QOE8343BLK | QOE8333BLK | |
|---|---|---|---|---|
| Material | Glands: Nylon, IP Seal: Silica gel, Body: Polycarbonate | |||
| Minimum Temperature | -40°C | |||
| Maximum Temperature | 105°C (max enclosure temperature) | |||
| IP Rating | IP68 (Tested to 1 Metre at 60 Minutes) | |||
| Glow Wire Test | 650°C | |||
| Cable Entries | 2x M20 Gland | 2X M20 & 1X M16 Gland | ||
| Dimensions | (D)68mm x (W)141mm x (H)37mm | (D)88mm x (W)141mm x (H)37mm | ||
| Terminals | 24A 4 Pole terminal block – max temp: |
60°C (2.5mm2 wire capacity)
| 32A 450V 3 Port Lever Wire Connectors
T85 (0.2-4mm2 wire capacity)
| 24A 4 Pole terminal block – max temp:
60°C (2.5mm2 wire capacity)
| 32A 450V 3 Port Lever Wire Connectors
T85 (0.2-4mm2 wire capacity)
Voltage (MAX)| 450V
Gland Torque Value| 2.5Nm
Lid Screw Torque Value| 1Nm
Max Cable Diameter| 8mm
Warranty| 1 Years
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCE.
- Before commencing any electrical work, to prevent the possibility of receiving an electric shock, ensure the mains isolator on the consumer unit is in the ‘OFF’ position and safely isolated in accordance with Best Practice Guide 3.
- Before commencing installation, ensure the fitting is complete with the fixings required (Wall fixings not provided).
- The enclosure will come with pre-fitted glands & a terminal block
- These enclosures are IP68 rated, tested to 1 Metre at 60 Minutes.
- The lid MUST be screwed down securely to ensure it achieves an IP68 rating.
QOE305#BLK SPECIFICATIONS :
| QOE3052BLK | QOE3053BLK | |
|---|---|---|
| Material | Glands: Nylon, IP Seal: Silica gel, Body: PA66 (Nylon) | |
| Minimum Temperature | -40°C | |
| Maximum Temperature | 95°C | |
| IP Rating | IP68 (Tested to 1 Metre at 60 Minutes) | |
| Glow Wire Test | 650°C | |
| Cable Entries | 2x PG16 Gland | 3X PG16 Gland |
| Dimensions | (D)32mm x (W)98mm x (H)106mm | (D)32mm x (W)32mm x (H)112mm |
| Terminals | 24A 5 Pole terminal block – max temp: 100°C (2.5mm2 wire |
capacity)
Voltage (MAX)| 450V
Gland Torque Value| 3.8Nm
Max Cable Diameter| 14mm
Warranty| 1 Years
The IP cable gland seals on QOE305#BLK can be separated so the maximum cable size on the gland changes from 11mm to 14mm (diameter)
UNICRIMP Limited, Scolmore House, Mariner, Lichfield Road Industrial Estate, Tamworth, Staffordshire B79 7UL
Errors & Omissions excluded. Specification is subject to change without notice.
- Telephone : 01827 300600
- E-mail : sales@unicrimp.com
- Website: www.unicrimp.com
FAQ
Q: Can the enclosure be submerged in water?
A: The IP rating indicates the level of protection against water and dust.
Refer to the specifications to determine the suitability for submersion.
Q: What is the warranty period for the product?
A: The product comes with a 1-year warranty against manufacturing defects.
Q: What is the maximum cable diameter that can be used with the
enclosure?
A: The maximum cable diameter recommended is 8mm to ensure proper fitting and
functionality.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>