Babba 1040001 Baby Bottle Cooler and Warmer User Manual

Babba 1040001 Baby Bottle Cooler and Warmer

Product Information

Technical Specifications

• Product Name: Babba Baby Bottle Cooler and Warmer
• Device Model: 104-0001
• Device Dimensions: 8.5 x 3 x 3 inches
• Device Weight: 2 lbs
• Power Adapter Input: 100-240V AC, 50/60Hz, 1.3A
• Power Adapter Output: 14.0V 3.0A 42.0W
• Battery Pack: Rechargeable lithium-ion battery (11.1V, 3S1P Configuration, 18650 cells, 3200mAh, 35.52Wh)
• Microcontroller Unit: nRF52832
• Transmitter/Antenna Type: Bluetooth 5.0
• Wireless Technology Frequency: 2.4GHz (Bluetooth)
• Modulation: GFSK at 1 Mbps, 2 Mbps data rates
• Designed by Babba Care, Inc.
• Products made in China

Product Usage Instructions

Cleaning and Maintenance

1. Clean the Babba Base with a dry cloth to keep the electronics dry.
2. Use provided Breast Pump wipes or a damp cloth with soap to clean the top of the device.
3. Wash the removable components (tan gasket, bottle, nipples, collar, and cover) with soap and water or in the top rack of the dishwasher.

Operating Instructions

1. Step 1: Pour milk or formula into the insulated bottle.
2. Step 2: Attach the Base device to the top of the bottle and flip it over so that the Base is on the bottom.
3. Step 3: Press the button (or control through the app) to start cooling. Press the same button to warm the bottle before feeding.

Turning off the device: Press the button until the Status Light turns off or long-press the button to turn off the device.

Charging the device: Plug the Power Adapter into the back of the unit and charge until the Battery Light changes from orange to green.

Safety Precautions

• The device must remain vertical during operation to keep the milk/formula in contact with the thermal plate.
• Avoid getting the sides or bottom of the device wet; only the top with the thermal plate is sealed.
• To hard reset, plug in the Power Adapter and press the device’s button for 10 seconds.

Product Overview and Intended Use

The Babba baby bottle cooler and warmer enable parents to more easily feed their baby. The Base attaches to the Bottle to either cools the milk as if it was sitting in a refrigerator or warms it to body temperature prior to feeding.

Status Light

• Green : Standby
• Pulsing Blue : Cooling
• Solid Blue : The bottle is cold
• Pulsing Red : warming
• Solid Red : The bottle is warm

Battery Light

• Blinking Orange : Low Battery
• Solid Orange : Charging
• Green : Fully Charged

Nipple Flow Rates

• Level 1: 0-3 months
• Level 2: 3+ months
• Level 3 : 6+ months
• Level 4 : High Flow

Download the App

Open or download the Babba App on your smartphone. The App allows you to control the device remotely, check the remaining battery life, schedule a time for the bottle to be warmed, and download the latest firmware.

Cleaning Instructions

• The Babba Base contains electronics, which should be kept dry. Just wipe the top of Babba with one of the provided Breast Pump wipes, or use a damp cloth with a dab of soap.
• The removable tan gasket, bottle, and bottle parts (Nipples, Collar, and Cover) may all be washed with soap and water, or washed in the top rack of the dishwasher.

Operating Instructions

1. Step 1 : Pour milk or formula into the insulated.
2. Step 2: Attach the Base device to the top of the bottle. Next, flip it over so that the Base is on the bottom and the bottle is on top.
3. Step 3: Press the button (on control it through the app) to begin cooling and take it with you. Then press the same button to warm the bottle when it is time to feed.

Turning off the device
Press the button until it cycles to off (Status Light is off), or long- press the button in any state to turn off the device.

Charging the device
Plug the Power Adapter in the back of the unit and charge the device until the Battery Light changes from orange to green.

Safety Precautions

• The device must remain vertical in operation so that the milk/formula remains in contact with the thermal plate.
• Do not get the sides or bottom of the device wet. Only the top of the device with the thermal plate is sealed.
• Do not block or cover the side vents.
• Do not operate in environments exceeding 80°F or the cooling performance may suffer.
• Avoid direct sunlight on the device.
• Only use the Power Adapter provided with the device.
• To avoid risk of strangulation, do not leave a baby or child unattended with the Power Adapter.

Troubleshooting

• Device not turning on : press the button on the device; plug the Power Adapter in to charge.
• Milk/formula not getting cold/warm : ensure the device is vertical so that the fluid is in contact with the thermal plate; it has not been cooling/warming long enough; the outside environment is too cool/hot; the vents on the side are obstructed.
• Button press not responding : charge the device; possible misalignment – contact customer support.
• Cannot connect the Smartphone App to the device : ensure Bluetooth is enabled on your Smartphone; ensure the device is on and the app is pulled up on phone; kill the App and restart the App.
• Outdated Firmware : download the latest App and pair with Babba device to ensure the device is operating with the latest firmware.

To hard reset the device, plug in the Power Adapter and press the Device’s button for 10 seconds. Please email us at support@babbacare.com for any issues. Customer support is eager to help.

Technical Specifications

• Product Name : Babba Baby Bottle Cooler and Warmer
• Device model : 104-0001
• Device dimensions: 8.5” x 3” x 3”
• Device weight : 2 lbs
• Power Adapter Input : 100-240V AC, 50/60Hz, 1.3A
• Power Adapter Output : 14.0V 3.0A 42.0W
• Battery Pack : rechargeable lithium-ion battery (11.1V, 3S1P Configuration, 18650 cells, 3200mAh, 35.52Wh)
• Microcontroller Uni t: nRF52832
• Transmitter/Antenna Type : Bluetooth 5.0 Wireless Technology
• Frequency : 2.4GHz (Bluetooth)
• Modulation : GFSK at 1 Mbps, 2 Mbps data rates
• Designed by Babba Care, Inc.  Product made in China.
• FCC and ISED Compliance:
  • FCC ID : 2BHFX-1040001
  • IC : 32751-1040001

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC/ISED RF Exposure Statement
This equipment complies with FCC and ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. In order to avoid the possibility of exceeding the FCC and ISED RSS-102 radio frequency exposure limits, this equipment should be installed and operated with a minimum distance of 20 cm (7.9 inches) between the antenna and your body during normal operation. Users must follow the specific operating instructions to satisfy RF exposure compliance.

ISED non-interference disclaimer
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-003(B) / NMB-003 (B).

Frequently Asked Questions

Can I wash all parts of the Babba Baby Bottle Cooler and Warmer in the dishwasher?

Yes, you can wash the removable components (tan gasket, bottle, nipples, collar, and cover) in the top rack of the dishwasher for easy cleaning.

How do I know when the bottle is cold or warm?

The Status Light indicates the bottle's temperature - solid blue for cold, solid red for warm, and pulsing lights for cooling or warming processes.

How do I control the Babba Baby Bottle Cooler and Warmer remotely?

You can control the device remotely by opening or downloading the Babba App on your smartphone. The app allows you to schedule warming times, check battery life, and download firmware updates.

What should I do if I encounter issues with my Babba Baby Bottle Cooler and Warmer?

For any problems or queries, please reach out to our customer support team at support@babbacare.com. We are here to assist you promptly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>