EUROface 47255 Barletta 33 Wide LED Abstract Chandelier Instruction Manual
- August 16, 2024
- EUROface
Table of Contents
EUROface 47255 Barletta 33 Wide LED Abstract Chandelier
Product Information
Specifications
- Product Name: BARLETTA 47255
- Manufacturer: Eurofase
- Customer Service & Tech Support: 905-695-2147
- Email: Info@eurofase.com
- Address: 33 West Beaver Creek Rd, Richmond Hill, Ontario, Canada L4B 1L8
Product Usage Instructions
Safety Instructions
Thank you for purchasing the BARLETTA 47255 lighting product. Please follow
these important safety instructions:
- Always hold the canopy and fixture together with care when handling the product.
- Clean the jacket of the cable and wire before adjusting their length.
- Adjust the cable and wire length only when the canopy is in a horizontal position.
- Avoid adjusting the cable or wire length when the canopy is at a sideways or upside-down position to prevent damage to the wire locks.
Assembly Instructions for Cable/Wire Lock
- Hold down the bottom of the wire lock and slowly push or pull the cable upwards to shorten it.
- Hold down the bottom of the wire lock and slowly push or pull the cable down to stretch it.
For detailed assembly instructions, please refer to the manual provided with the product.
FAQ
-
Q: How do I adjust the cable length for the BARLETTA 47255 light fixture?
A: To adjust the cable length, follow the instructions provided in the manual. Always handle with care and avoid applying extra force to the cables/wires. -
Q: What should I do if I encounter issues with the wire locks?
A: If you experience issues with the wire locks, contact customer service & tech support for assistance.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type and number of conductors.
- Wrap the green (or bare copper) grounding wire from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
- This unit is suitable for installation in a dry, indoor location only.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instruction for future reference.
- Estimated Assembly Time: 20 minutes
HARDWARE
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included) : Wire strippers, Ladder.
INSTALLATION
WARNING
In order to avoid damage of the wire lock, please follow below action to do
adjustment of the cable!
- Shorten cable: Please hold down the bottom of the wire lock and slowly push or pull the cable upwards.
- Stretching cable: Please hold down the bottom of the wire lock and slowly push or pull the cable down.
ASSEMBLY INSTRUCTION FOR CABLE/WIRE LOCK
Please follow below assembly instruction for cable/wire lock.
- When removing the fixture from the packaging or handling it for installation, always hold the canopy and the fixture together with care. Do not apply extra force to the cables/wires or adjust the cable length.
- Clean the jacket of the cable & wire before adjusting the length of the cable & wire.
- When adjust the length of the cable and wire, only place the canopy in a horizontal position and the internal side face to the ceiling.
- Please do not adjust the length of cable or wire when canopy at sideway and upside-down position or orientation, or it will damage the wire locks. Pull the cable/wire from the back of the canopy carefully to shorten the cable/wire, press down the cable lock and pull the cable/wire at the front of canopy carefully to lengthen the cable/wire. Do not yank the cable/wire.
Customer Service & Tech Support:
905-695-2147
Email: Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canda L4B 1L8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>