NBAU100110BK Laptop Charger User Guide

NBAU100110BK Laptop Charger

Laptop charger

Parts list [Image A]

1. AC cable
2. AC adapter
3. TYPE C cable
4. DC connector

Installation of the AC adapter

[Image B]

1. Connect 0 with (2).
2. Connect with the right

Please check the original manual of your laptop for the right DC connector.
The product is now ready for use.

Charge the laptop

[Image C]

1. Connect 1 to the mains.
2. Connect * to the laptop.

The AC adapter now charges the battery and powers the laptop.

Specifications

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Disconnect the product from the power source and other equipment if problems occur.
• Always check that the voltage of the product corresponds to the mains voltage
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
• Unplug the product when your device is charged or if you do not plan on using the product for an extended period of time.
• The power outlet shall be located near the product and shall be easily accessible.

Using the product

1. Connect the charger into the power outlet.
2. Unplug the charger when it is not in use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>