Wired Chimes chm0175 Wired Door Entry Installation Guide
- August 10, 2024
- Wired Chimes
Table of Contents
Wired Chimes chm0175 Wired Door Entry
Product Installing Information
Lever off rear panel and screw base to wall with arrow on unit pointing UP
Remove the rear panel of the unit. Ensure the arrow on the unit is pointing
upwards, then screw the base to the wall.
Description
- Shows the rear panel being removed from the main unit.
- Indicates the direction of the arrow on the unit pointing upwards.
- Depicts the base being screwed to the wall.
Wiring via transformer (A) or 9V battery (B)
Connect the wiring either through a transformer (A) or using a 9V battery (B).
Product Description
- Shows two wiring options.
- Option A: Wiring via a transformer.
- Option B: Wiring via a 9V battery.
- Indicates the connection points for both options.
- Click the rear panel back into place
- Once the wiring is complete, click the rear panel back into place on the unit.
- Shows the rear panel being clicked back into place on the main unit.
Specifications
| Component | Description |
|---|---|
| Transformer | 230/8V~ |
| Battery | 9V |
FAQ
Q: What should I do if the unit does not power on?
A: Ensure that the wiring is correctly connected and that the transformer or battery is properly installed.
Q: Can I use a different type of battery?
A: No, it is recommended to use a 9V battery as specified in the instructions.
Q: How do I know if the transformer is working?
A: Check the voltage output of the transformer to ensure it is providing 230/8V~ as required.
INSTALLATION INSTRUCTIONS
- Lever off rear panel and screw base to wall with arrow on unit pointing UP
- Wiring via transformer (A) or 9V battery (B)
- Click the rear panel back into place
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>