sunnysoft AUXUS Wall EV Charger User Guide

sunnysoft AUXUS Wall EV Charger

Product Specifications

• Model: Unknown
• Version: V1.0
• Revision Date: 2023-08

Product Information

The product is a multifunctional device designed for various uses. It includes different flash options and a display screen for easy operation.

Product Usage Instructions

Dimensions
The exact dimensions of the product are not specified in this manual. Please refer to the product packaging or contact the distributor for more information.

Installation

1. Unbox the product and ensure all components are included as listed in the manual.
2. Find a suitable location for installation, ensuring proper ventilation and stability.
3. Connect the device to a power source following the provided guidelines.
4. Turn on the device and follow any initial setup instructions displayed on the screen.

Display Screen Description
The display screen shows different flash options and error notifications. Refer to the manual for specific meanings of each symbol displayed on the screen.

FAQ:
What should I do if I encounter error code CP/CC?
If you see error code CP/CC on the display screen, please refer to the manual for troubleshooting steps. In case the issue  persists, contact the distributor for further assistance.

Wall EV Charger User Manual

Symbol Meaning

The company is committed to the continuous improvement and update of the product, product hardware and software will comtinue to upgrade, the information provided is subject to charge without prior notice.

Product Overview

• Current setting: Click the “current” button to switch the current and it will be automatically confirmed when stopping the operation.
• Time booking: Click the”delay” button to book the charging time and it will be automatically confirmed when stopping the operation.
• APP Bluetooth resetting: Press the “delay” and “current” button together> 3 seconds to disconnect any previous mobile APP Connecting. Appearance of Wall AC Charger

Product Overview

This product is a AC charging station, mainly used for AC charging of electric vehicles. The product is composed of charging station body, wall-hanging backboard, floor-to-ground column (optional), etc., with charging protection, charging by swiping card. This product adopts industrial design principle, easy to install and easy to use.

• Exterior: Exquisite and light, a variety of color options, suitable for different application scenarios.
• Protection: level of protection IP54(waterproof and dust-proof), can withstand wind, rain and sun exposure.
• Operation: The head of the charger is designed to open the cover with one botton. The operation is simple and convenient, namely plug and play.
• Safety: multiple protection,safety upgrade, high quality materials, fireproof, waterproof and dust-proof.
• Commonality: Small boby, big energy, compatible with 99% of the new energy vehicles.
• Quality: Pure copper wire without oxidation, comply with inspection standard, flame retardant impact resistance.

Dimensions

Size: 265x170x80
Measurement Unit: mm

Product Parameter

Installation

Steps for Usage

1. Make sure the charging box is connected power.
2. Connect the EV and the charging box with the EV charging cable.
3. Use swipe card or APP to start.
4. The vehicle is charged normally
5. Apply the APP or swipe the card to end.
6. Unplug the device and wrap the cable around the hook

NOTE :

1. After the vehicle is fully charged, the device will automatically stop charging.
2.  Please read the instructions carefully before use.
3. For the botton, book time and switch current before plug into the vehicle. The bottons will be invalid when in charging. 4. For the App control(book time and switch current), operate after plug into vehicle (before charging), the current switch function will be valid even during charging.

Steps For Power Wiring (1 phase; 7kW)

Steps for Power Wiring (3 phase; 11/22kW)

Display Screen Description

Warning And Cautions

• For use only in the environment with RCD residual current protector;
• Do not use the device when the charging cable is damaged;
• For electric vehicle charging only;
• The product must be well grounded when used; It is strictly prohibited to step on the charging cable, pull the cable, bend or knot the cable.
• Do not put your finger into the charging plug.
• Do not connect thr circuit by yourself without the guidance of a professional.
• Do not use when the inside of the charging plug is wet.
• Do not install by yourself before reading the installation instruction.
• Do not use for other purposes except for electric car charging.
• SPECIAL ATTENTION: Do not try to disassemble the device by yourself under any circumstances, this may cause damage to the internal precise parts, and you will not be able to injoy after-sales service.

Fault Indicator Prompt

Remark: Error frequency is flashing certain times with 200ms interval, continuous loop with 1s interval.

Common Trouble Handing

WHAT’S IN THE BOX

© Sunnysoft s.r.o., distributor

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>