Lucci Air V1.1-EU Climate Iii Dc Ceiling Fan Instruction Manual

Lucci Air V1.1-EU Climate Iii Dc Ceiling Fan

Specifications

• Product Name: Lucci Airfusion Climate III DC Ceiling Fan
• Remote Control: 6-speed remote control
• Weight Capacity: 16kg Indoor Use Only
• Blade Height: 2.3m above the floor in Europe, 2.1m above the floor in Australia

Product Usage Instructions

• Safety Precautions:
  • This appliance is suitable for children aged 8 years and above and persons with reduced abilities.
  • Ensure an all-pole disconnection is incorporated into the fixed wiring for safe use as per wiring rules.
  • Do not dispose of the fan as unsorted municipal waste; use separate collection facilities to prevent environmental damage.
  • Ensure the mounting structure can support a weight of 16kg.
  • Mount the fan with blades at least 2.3m above the floor in Europe or 2.1m above the floor in Australia.
  • For indoor use only; Avoid locations subject to water or moisture to prevent damage, injury, or electrical shock.
  • Must be assembled and installed by a licensed electrician.
• Installation Instructions:
  • For detailed installation instructions, refer to the provided installation manual containing step-by-step guidance for a safe and proper installation of the Lucci Airfusion Climate III DC Ceiling Fan.
• Maintenance:
  • Regularly clean the fan blades and motor housing to prevent dust buildup and ensure smooth operation. Avoid using abrasive cleaners or solvents on the fan.
• Warranty Information:
  • Refer to the warranty information provided with the product for details on coverage and terms. Contact the manufacturer for any warranty-related queries.
• Contact Information:
  • If you have any questions or need assistance, contact Beacon International Ltd or Beacon Lighting Europe GmbH using the provided contact details.

FAQs

• Q: Can the fan be used outdoors?
  • A: No, the fan is suitable for indoor use only to prevent damage, injury, or electrical shock.
• Q: What is the recommended height for mounting the fan?
  • A: Mount the fan with blades at least 2.3m above the floor in Europe or 2.1m above the floor in Australia for optimal performance and safety.
• Q: Can children operate the fan?
  • A: The fan can be used by children aged 8 years and above under adult supervision.

THANK YOU FOR PURCHASING

Thank you for purchasing the latest in energy-saving ceiling fans. This fan runs on DC (direct current) power which gives it the benefit of being super energy efficient whilst still maintaining high volume air-movement and silent operation.

• Energy saving – The DC motor is the latest technology in fan design. Its highly efficient motor saves up to 65% more energy than ceiling fans with traditional AC motors.
• Silent operation – This DC fan motor is programmed with a stabilized current which efficiently reduces motor noise.
• Low operating temperature – The DC power is managed effectively which brings down the motor operating temperature to less than 50℃℃. This results in a much cooler motor than a standard AC fan and increases the longevity of the motor.
• 6-speed remote control – Regular AC ceiling fans usually come with only 3 speeds, this DC fan comes complete with a 6-speed remote, which gives a greater choice of comfort levels.

SAFETY PRECAUTIONS

1. In Europe: This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance shall not be undertaken by children without supervision.
2. In Australia: The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. An all-pole disconnection switch must be incorporated into the fixed wiring, per local wiring rules.
   • IN AUSTRALIA
   • WARNING: FOR THE SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION MUST BE INCORPORATED INTO THE FIXED WIRING PER THE WIRING RULES. As outlined in clause 7.12.2 of AS/NZS 60335-1 for meeting the minimum electrical safety of this standard.
   • Please note warranty will be void if installation is without a means for an all-pole disconnection incorporated in the fixed wiring under the wiring rules.
   • Example: If a fan is connected to a circuit that can be isolated via an all-pole safety switch at the switchboard, then this is considered to be an all-pole disconnection to the ceiling fan electrical circuit, meeting the requirements of clause 7.12.2 of AS/NZS 60335.1.
   • A single-pole switch on the active the receiver input of the remote control must also be included in the wiring and located in the same room as the ceiling fan.
5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
6. The structure to which the fan is to be mounted must be capable of supporting a weight of 16kg.
7. The fan should be mounted so that the blades are at least 2.3 m above the floor in Europe or 2.1 m above the floor in Australia.
8. This fan is suitable for indoor use only. Mounting the fan in a location where it is subject to water or moisture is dangerous and may increase the risk of damage, injury, or electrical shock and will void the warranty.
9. Must be assembled and installed by a licensed electrician.
10. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent, or suitably qualified persons.
11. The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent, or suitably qualified persons.
12. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan; the mounting of the suspension system shall be performed by the manufacturer, its service agent, or suitably qualified persons.

PARTS LIST

• Unpack your ceiling fan carefully. Remove all parts and hardware.
• Lay out all the components on a smooth surface and make sure no components are missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the ceiling fan has been damaged during transport. Do not operate/install any product that appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.
• Examine all parts, you should have the following:

1. Canopy x 1
2. Mounting bracket x 1
3. Blades x 3
4. Down rod x 1 set
5. Decorative Cover x 1
6. Fan motor & Downrod coupling housing x 1
7. Bottom cover x 1
8. Remote receiver x 1
9. Screws for mounting bracket & blades x 1 set
10. Balancing kit x 1 set
11. Remote control set x 1
12. Light kit extension cable

INSTALLATION OF THE MOUNTING BRACKET

• The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the blade to the nearest objects or walls.
• Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 16kg, with two long screws provided.
• Ensure at least 30mm of the screw is threaded into the support. (Fig. 2)
  • NOTE: The bracket screws provided are for use with wooden structures only. For structures other than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for the mounting surface and the surrounding environment.

ANGLED CEILING INSTALLATION

• This fan hanging system supports a maximum 10-degree angled ceiling installation. (Fig. 3)

INSTALLATION OF THE FAN

INSTALLATION OF THE DOWN ROD (Fig.4)

1. Remove the ball joint and dowel pin by loosening the set screw. Remove the lock pin by removing the hitch pin. Do not discard these parts, they are required to be reassembled later.
2. Loosen the set screws on the down rod coupling housing of the fan motor assembly.
3. Carefully feed the fan wires up through the down rod. Install the down rod into the down rod coupling housing of the fan motor assembly. Line up the down rod coupling housing holes with the down rod holes and install the lock pin and the hitch pin.
4. Secure the down rod by tightening the set screws.

Airfusion Climate III Installation Instructions

INSTALLATION OF THE HANGER (Fig.5)

1. Install the decorative cover onto the down rod and cover the coupling parts. Carefully slide the canopy onto the down rod.
2. Reinstall the ball joint and dowel pin back to the down rod and secure by tightening the set screw.

INSTALLATION OF BLADE (Fig.6)

1. Insert the blade into the slot of the rotating member of the fan motor assembly.
2. Align and engage the holes of the blade to the blade bracket.
3. Secure the blade to the fan motor assembly by tightening the 3 blade screws and washers. Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care not to over-tighten the screws, as this can damage the blades
4. Repeat the same process for the other blades.

INSTALLATION OF LIGHT KIT (Optional and sold separately) (Fig.7)

• NOTE: The light kit must be installed by a licensed electrician.
• The light kit is sold separately. (SKU# 210643, 210644, 210645).
• Connect the wires of the light kit to the motor part via the quick connector.
• Fix the light kit on the motor part then secure it by turning clockwise.
• Install the GX53 lamp to the light kit. Do not exceed the maximum power rating.

PREPARE AND COMPLETE THE ELECTRICAL WIRING-WIRING DIAGRAM (FIG. 8)

• WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED ELECTRICIAN.
• NOTE: AN ADDITIONAL ALL-POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.
• NOTE: IF THERE ARE TWO OR MORE DC CEILING FANS INSTALLED IN ONE LOCATION, AN ISOLATION SWITCH IS REQUIRED FOR EACH CEILING FAN. THIS IS REQUIRED WHEN PROGRAMMING THE REMOTE AND RECEIVER TO PAIR TOGETHER.

Ensure the motor earth wire is connected to the single earthing terminal block “1” in the diagram below. (Fig. 8)

1. Connect the live supply wire to the “L” terminal of the terminal block on the mounting bracket.
2. Connect the neutral supply wire to the “N” terminal of the terminal block on the mounting bracket.
3. Connect the earth wire to the earth terminal of the terminal block on the mounting bracket.
4. Hang the complete fan assembly onto the mounting bracket. (“Hanging the fan” section & Fig. 9)
5. Connect the supply wiring from the mounting bracket to the input of the DC motor driver/receiver.
6. Connect the output wires of the DC motor driver/receiver to the input wires of the fan motor and the light kit.

HANGING THE FAN (Fig. 9)

• Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.9)

FINISHING THE INSTALLATION

INSTALLATION OF THE CANOPY (Fig.10)

1. Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan’s accessible metal body back to the earth terminal at the terminal block on the mounting bracket.
2. Loosen the 2 screws at the bottom of the mouthing bracket.
3. Slide the canopy up to the mounting bracket and align the keyholes on the canopy with the screws on the mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.

INSTALLATION OF THE BOTTOM COVER (Fig.11)

1. Install the bottom cover of the motor part if no light kit is required.

USING YOUR CEILING FAN

REMOTE CONTROL (Fig.12)

1. Open the battery compartment cover by removing the securing screw and insert a 2 x AAA battery. Note the correct battery polarity (+/-) when inserting the battery, and then replace the cover and secure with the screw.

2. Test the remote by pressing and holding any button. A red LED will be lit up at the top of the remote to indicate that there is power to the remote and it is ready for use to control the fan.

3. Follow the guide below to operate the fan and learn the functions.

4. Direction of the fan (reverse switch)

5. Speed of the fan

6. ON/OFF the fan

7. Timing control of the fan

8. ON/OFF the light

9. Natural wind (The fan speed automatic cycle between 1 to 6 speeds)

10. Anti-theft function (the light ON 5~20 minutes every 2 hours)

11. 1. 5V AAA battery X 2pcs (included)

REPAIRING THE FAN RECEIVER & REMOTE PAIRING

• NOTE: The pairing of the remote and receiver has been done at the factory.
• When the ceiling fan is installed, pairing the fan receiver and remote is NOT required.
• Should the remote and receiver lose control after installation or during use, the pairing of the remote and the receiver must be repaired.
• Below are the operating symptoms and methods to repair the pairing of the DC ceiling fan remote and receiver.

Issues:

• Loss of control – The fan is only running at high speed after installation
• Loss of control – No reverse function after installation
• Loss of control – Remote cannot communicate with the receiver

Solution:

• Switch off the main power of the ceiling fan.
• Switch on the main power of the ceiling fan. Press and hold the On/Off button on the remote for 5 seconds within 30 seconds after switching on.
• There will be a notification ‘beep’ sound from the receiver to indicate that the paring process is successful.
• Turn on and select the different speeds of the ceiling fan to check the operation of the fan.

AFTER INSTALLATION

• NOTE: ceiling fans tend to move during operation because they are mounted on a rubber grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimeters is quite acceptable and DOES NOT suggest any problem.
• TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down rod are secure.
• BALANCING KIT: A balancing kit is provided to balance the ceiling fan on the initial installation. Please refer to the instructions on how to use the balancing kit. The balancing kit can be used to assist in re-balancing should the ceiling fan become unbalanced again. Store your balancing kit away after installation for future use if required.

NOISE:

• When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency signals superimposed in the electricity for off-peak hot water control may cause a change in fan motor noise. This is normal. Please allow a 24-hour “settling-in” period, most noises associated with a new fan disappear during this time.
• The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the motor run – All electric motors are audible to some extent.

CARE & CLEANING

NOTE: Always turn OFF the power at the mains switch before performing any maintenance or attempting to clean your fan.

• Every 6 months periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint-free cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.
• Do not soak or immerse your ceiling fan in the water or other liquids. It could damage the motor or the blades and create the possibility of an electrical shock.
• Ensure that the fan does not come in contact with any organic solvents or cleaners.
• To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.
• The motor has a permanently lubricated ball bearing so there is no need to oil.

SAFETY PRECAUTIONS FOR BATTERY

• WARNING – Keep new and used batteries away from children.
• CAUTION – Do not ingest battery—Chemical burn hazard.
• Always use a 2 x AAA battery type with this ceiling fan remote controller.
• Ensure the batteries are inserted with the correct polarity.
• To prevent false operation during battery insertion or replacement, this ceiling fan must be disconnected from the supply mains.
• Remove batteries from the product when not in use for long periods.
• Batteries must be removed from the remote transmitter before it is discarded.
• Dispose of exhausted batteries immediately and safely (so they cannot be retrieved by children). Batteries can still be dangerous. Contact your local council to safely dispose of the battery.
• Regularly check the product and make sure the battery box lid is correctly secured. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Battery Leaks: Battery contains chemicals and should be treated as any chemical would. Take precautions when handling leaked battery chemicals. Battery chemicals should not be placed near the eyes or ingested.

TECHNICAL INFORMATION

TECHNICAL INFORMATION

Fan| 52’’ DC fan
Fan Models / SKU#| LD-52″CL III / SKU# 210640, 210641, 210642
Rated Voltage| 220-240V~ 50Hz
Rated Wattage (Motor)| 35W
Rated wattage (Lamp)| GX53, Max.12W
Battery for remote| 2 x AAA
Weight| 3.9kg
Canopy Dimensions| H:50mm     Dia:150mm

WARRANTY INFORMATION

• IN AUSTRALIA / NEW ZEALAND – Please refer to the separate WARRANTY STATEMENT.
• IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased for warranty service. This fan is suitable for indoor use only.
• CAUTION READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION.

CONTACT INFORMATION

• Beacon International Ltd
• Hong Kong Head Office: Room 05, 18/F, Kimberland Center, 55 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong
• Tel +852 34915904
• Fax +852 34915917
• China showroom / Office: 11/Fl, Guzhen Lighting Building B, Mid Zhongxing Road, Guzhen, Zhongshan, Guangdong, China.
• Tel: +86 760 8986 6388
• Fax: +86 760 8986 6380
• info@beaconinternational.com
• www.beaconinternational.com
• Beacon Lighting Europe GmbH Campus Fichtenhain 42, 47807 Krefeld, Germany
• TEL +49 (2151) 325 82 39
• FAX +49 (2151) 325 70 65
• sales@beaconlighting.eu
• www.beaconlighting.eu.

References

• Homepage
• Beacon Lighting Europe – Fans and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>