Marrado DH-902 Bluetooth Mesh Scene Night Light Instruction Manual
- July 27, 2024
- Marrado
Table of Contents
Marrado DH-902 Bluetooth Mesh Scene Night Light
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Exposure Limits: FCC set limits for uncontrolled environment
- Minimum distance: 20 cm between radiator and body
Product Usage Instructions
Product Introduction:
The scene night light is a small night light controlled by dual mode WiFi and
Bluetooth communication protocol. RealizableRemote control, timing control,
and other functions allow for direct connection to WiFi without the need for a
gateway.
Basic parameters:
- Working voltage: AC110~220V-50Hz/60Hz
- Working power: Max3W
- Operating environment: temperature 0°C~40 °C, relative humidity less than 90%
- Communication protocol: WiFi+Bluetooth
Instructions for use:
- Download the Yiweilian app from major app stores or scan the QR code below for downloadYi Weilian QR Code
- Install Yiweilian and register a login account
- Add device
Press and hold the button on the night light for 5 seconds while powered on, and the night light will enter a breathing stateOpen the mobile Bluetooth and open the Easy WeChat app for network distribution.
Installation
- Ensure the device is placed at least 20 cm away from your body.
- Avoid co-locating the transmitter with any other antenna or transmitter.
Operation
- Ensure the device does not cause harmful interference.
- The device must accept any interference received.
- Do not make changes or modifications not approved by the responsible party.
Click on the sign in the upper right corner of the homepage
- Add Device ->Other Add Methods ->Bluetooth Distribution
- Confirm the indicator light flashing and then click Next
- click on the scanned device -›enter the WiFi passwordConnect
- add and select the room.
Key usage instructions
Short press to switch scene lights back and forth, and long press for 1.5
seconds to turn off the lights. Press and hold for 5 seconds to enter
distribution mode.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FAQ
Q: What should I do if the device is causing interference?
A: Ensure the device is correctly installed as per the guidelines, and contact
customer support if issues persist.
Q: Can I place the device closer than 20 cm to my body?
A: It is recommended to maintain a minimum distance of 20 cm for compliance
with FCC exposure limits.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>