RODCRAFT RC7028 Die Grinder 6mm Instruction Manual

: July 26, 2024
: RODCRAFT

Table of Contents

RC7028 Die Grinder 6mm
Declarations
Noise and Vibration
Regional Requirements
Safety
Intended Use
Product Specific Instructions Operation
Service and Maintenance
Useful Information
Safety Data Sheet
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Operation Manual
Printed Matter No. 8956001241
Date: 2024-02 Issue No. 02

Grinder
Model: RC7028, RC7048, RC7128
Safety Information

RC7028 Die Grinder 6mm

****	WARNING

To reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool MUST read and understand these instructions before performing any such task.
DO NOT DISCARD – GIVE TO USER

****Illustration 1: Air Diagram

Description	RC7028	RC7048	RC7128

Length (mm)
Net weight (kg)
Free speed air consumption (l/s)
Air inlet thread size (“)
Power (W)
Sound pressure [db(A)] Sound power [db(A)] Free Speed (RPM)| 191
0.72
2.10
1/4
400
85.2
96.2
27000| 250
0.8
2.10
1/4
400
85.7
96.7
27000| 169
0.76
2.10
1/4
400
84.8
95.8
23000

Declarations

EU Declaration of Conformity
We, Desoutter GmbH, Edmund-Seng-Str. 3-5, 63477 Maintal, Germany, declare under our sole responsibility that the product (With name, type, and serial number, see the front page) is in conformity with the following Directive (s):
2006/42/EC (17/05/2006)
Harmonized standards applied: EN ISO 11148-9:2012
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue Bobby Sands, BP10273 44818
Saint Herblain, France
Saint-Herblain, 17/05/2016
Pascal ROUSSY

Signature

UK Declaration of Conformity

We, Desoutter GmbH, Edmund-Seng-Str. 3-5, 63477 Maintal, Germany, declare under our sole responsibility that the product (with name, type and serial number, see front page) is in conformity with the following UK Regulation(s):
Supply of Machinery (Safety) Regulations 2008
Designated Standards applied:
EN ISO 11148-9:2011
Saint-Herblain, 21/01/2022
Pascal ROUSSY

Signature

Authorities can request relevant technical information from:
UK Authorized Representative:
Air Compressors & Tools Ltd
Zodiac – Unit 4, Boundary way
Hemel Hempstead Industrial Estate, HP27SJ Hempstead
Hertfordshire – UK
Contact: M.Taylor

Noise and Vibration

These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.
We, Desoutter GmbH , cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found by accessing http://www.pneurop.eu/index.php and selecting ‘Tools’ then ‘Legislation’.
We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment.
If this equipment is intended for fixtured applications: The noise emission is given as a guide to the machine builder. Noise and vibration emission data for the complete machine should be given in the instruction manual for the machine.

Regional Requirements

WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/

Safety

DO NOT DISCARD – GIVE TO USER
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
WARNING
All locally legislated safety rules regarding installation, operation and maintenance shall be respected at all times.

Statement of Use

For professional use only.
This product and its accessories must not be modified in any way.
Do not use this product if it has been damaged.
If the product data or hazard warning signs on the product cease to be legible or become detached, replace without delay.
The product must only be installed, operated and serviced by qualified personnel in an industrial environment.

Intended Use

This product is designed for removing material using abrasives. No other use permitted.

Product Specific Instructions Operation

Air Supply Requirements

Supply tool with 90 psig (6.2 bar) of clean, dry air.
Higher pressure drastically reduces tool life.
Connect tool to air line using pipe, hose, and fitting sizes shown in the diagram.

Installation / Operation

Fix the accessories properly to the tool.
Connect device as shown in Fig. 01.
To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger.
Release the trigger to stop.

After the work is finished
WARNING The stopping time may be longer than 5 seconds.
► Make sure that the tool is switched off and has come to a complete stop before it is laid down.
► The stopping time is dependent on the abrasive used.
Put down the tool carefully, so that there is no risk that the tool starts by itself.

Service and Maintenance

Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two (2) drops per minute.

Maintenance instructions

Follow local country environmental regulations for safe handling and disposal of all components.
Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised dealer for advice on technical service or if you require spare parts.
Always ensure that the machine is disconnected from energy source to avoid accidental operation.
Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
To keep downtime to a minimum, the following service kit is recommended: Tune-up kit Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.

Useful Information

Country of origin
Taiwan

Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Rodcraft website.
Please visit: www.rodcraft.com.

Safety Data Sheet

The Safety Data Sheets describe the chemical products sold by Rodcraft.
Please consult the Rodcraft website for more information qr.cp.com/sds.

Copyright
© Copyright 2024, Desoutter GmbH, Edmund-Seng-Str. 3-5, 63477 Maintal, Germany
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.