MOAAN INKPALM5 Mini E-Book Reader User Manual
- July 26, 2024
- MOAAN
Table of Contents
MOAAN INKPALM5 Mini E-Book Reader
Please read this manual carefully before using the product and keep it in a safe place.
Product Introduction
Thank you for purchasing the Moaan Mini E-book Reader. This product is a portable device with a high-definition electronic ink screen. Electronic devices have built-in massive reading resources, allowing you to enjoy a reading experience comparable to paper books.
Basic parameters
- Product Name: E-book Reader
- Product Type: inkPalm5
- Display: E Ink 5.2 inches 284ppi
- Input: 5V 1A
- Battery Rated Capacity: 1400mAh
- Interface Type: Type-C
- Processor: Quad ARM Cortex-A7@1.8GHz
- Operating system: Android 8.1
- Storage information: 1GB RAM + 32GB ROM
Accessories list
Function introduction
- Power on : Press and hold the power button for 5 seconds.
- Shut down: Press and hold the power button for 2 seconds, a pop-up window will appear, and click to shut down.
- Function keys : The default function is volume up/down, which can be switched to up/down in the device settings.
Page turning function.
- Logo touch: The single-click function defaults to return, and the long-press function defaults to full swipe. available on the device In settings, turn off touch or switching functions.
- Standby: When the phone is on, short-press the power button. Indicator light: When charging, the white light flashes. When fully charged, the white light stays on.
- Wi-Fi connection: Find Network Settings in Device Settings→Turn on Wi-Fi and connect the network.
- Bluetooth connection : Find Network Settings in Device Settings→Turn on Bluetooth and pair a new device.
Exception handling
- Crash: Press and hold the power button for 12 seconds and then release it, then press and hold the power button for 5 seconds to turn it on.
- Unable to turn on: If the problem cannot be solved according to the first method, please first confirm whether there is power. If not, If there is a battery problem, please contact after-sales service immediately.
Precautions
- Only batteries approved by the manufacturer are allowed to be used. Replacing the battery with the wrong type may cause the If the full protection fails, there will be dangers such as explosion and fire.
- Do not place the battery in extremely high-temperature environments, such as sunlight, fire, microwave ovens, and ovens. etc. Failure to do so may result in an explosion or leakage of flammable liquid or gas.
- Do not disassemble, hit, squeeze, or cut the battery. It is strictly prohibited to use sharp objects, screwdrivers, etc. Touching or prying the battery may cause an explosion.
- Do not place the battery in an extremely low-pressure environment, otherwise, it may cause the battery to explode or leak. Flammable liquids and gases.
- If the battery swells severely, do not continue to use it.
- Do not swallow the battery, otherwise, it may cause chemical burn hazards hurt
- If you think a battery may have been swallowed or placed inside any part of the body, seek medical advice immediately Seek medical attention.
- If the battery compartment is not securely closed, stop using the device and keep it away from children.
- Keep new and used batteries away from children.
- Please do not throw batteries into domestic garbage for disposal. Please abide by the corresponding national safety regulations. Dispose of used batteries completely.
- The product package does not contain a power adapter. Please purchase a CCC-certified 5V power adapter. device.
- Please avoid direct contact between magnetic metal contacts and other metal products to prevent short circuits.
- Since the product will continue to undergo OTA updates and upgrades to bring a better user experience, Please refer to the actual product for the relevant descriptions in the manual.
- High sound pressure! Do not wear headphones at high volume for long periods of time to avoid hearing loss.
Name and content of hazardous substances in products
FCC STATEMENT
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
RF exposure
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>