lnline Design HBWA.011 Handrail Bracket Instruction Manual
- July 26, 2024
- lnline Design
Table of Contents
lnline Design HBWA.011 Handrail Bracket Instruction Manual
Overview
This guide offers detailed steps for installing a Handrail Bracket from the Quasar Series into wood, drywall, or sheetrock.
Bracket Components
- Hanger Screw
- Wall Flange
- Bracket Main Body
- M5 Set Screw
- M5 Button Head screws
- Round Saddle Adapter
Tools Required
- Stud-Finder
- Handheld Drill
- 1/4” drill bit
- 5, 4, & 5mm Hex Wrench
- 80mm Drill and Tap
Instructions
- Using a Stud-Finder, locate a stud and the vertical position off the nose of the step that you would like to position the handrail bracket (this hole on average is 31” depending on your county code and comfort). Spot drill using 1/4” drill bit to avoid wood
- Drive the Hanger Screw (part #1) into the hole and secure the lag end of the stud using a 4mm Wrench. Make sure to leave the sleeve out from the stub to mount the Wall Flange (part #2).
- Mount the Wall Flange (part #2) into part #1 by screwing it in using a 5mm Then the Bracket Main Body (part #3) into the sleeve of part #2. Position/Rotate the flange and the bracket to the desired angle orientation and tighten the Hex Screw (part #4) using the 2.5mm Wrench.
- When mounting to steel handrail use the supplied M5 Button Head screws (part #5). Steel handrail needs to be drilled and tapped for 8mm. Use Round Saddle Adapter (part #6) to attach to a round handrail. If mounting a wooden handrail, customers must supply appropriate lag screw to replace the M5 Button Head screws (part #5)
Useful Links
Drill & Tap Kit: https://inlinedesign.com/collections/hardware/products/tools-
tap-drill-metric-m5-m6-m8
Install Handrails: https://cdn.shopify.com/s/files/1/0481/5798/2883/files
/Installing-Stainless-Steel-Handrails.pdf
Note
A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page
Read More About This Manual & Download PDF:
References
- Inline Design - Modern Handrail, Bar, Glass & Cable Railing Systems
- Tools Tap & Drill Metric – Inline Design
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>