Kmart 43382880 5 Pack Self Adhesive Panels Classic White Instruction Manual
- July 25, 2024
- Kmart
Table of Contents
Kmart 43382880 5 Pack Self Adhesive Panels Classic White
FAQ
- Q: Can I install the panels on a brick wall?
- A: No, brick walls are not sufficiently flat for proper adhesion of the panels.
- Q: Is it necessary to use primer paint on unfinished walls before installing the panels?
- A: Yes, primer paint is required on unfinished walls such as gypsum or plaster for better adhesion.
Recommended And Non-Recommended Surfaces
Recommended Surfaces
These surfaces will provide good quality results:
- Smooth ceramic tiles
- Smooth glass tiles
- Wall panel (acrylic)
- Mirrors
- Smooth painted gypsum
- Stainless metal
- Laminate
Non-Recommended Surfaces:
These surfaces will not be suitable for use:
- Brick wall (not su ciently flat)
- Stone wall (not su ciently flat)
- Unfinished wall such as gypsum or plaster (this requires primer paint first)
- Stucco wall (not su ciently flat)
- Unpainted plywood (paint with primer before installing panels)
- Shower wall
- Oily wall
Before you start
- It is recommended that you test the suitability of your surface by testing in an inconspicuous location & check after 7 days
- Patch any damaged areas of the surface
- Prepare your surface by ensuring it is smooth, clean & dust-free. Allow recently painted or primed walls to cure for 30 days prior to applying panels to avoid bubbling
- Gather required tools: Sharp utility knife, ruler, squeegee (not included)
- It is recommended that installation be completed by at least 2 people
Installation
- Clean and prepare the surface as described above
- Remove the backing sticker to expose the adhesive
- Press the panels to the wall firmly and evenly, smooth out to prevent any air bubbles
Care & Cleaning
Ongoing Care & Cleaning
- Wipe down with a damp cloth. Avoid using any chemical cleaners.
- If using any cleaner other than water, test in an inconspicuous area first
Lifespan
- These panels are not designed to be removable. Damage may occur during if they are removed after they have been applied.
WARNING: TEST IN AN INCONSPICUOUS LOCATION AND CHECK AFTER 7 DAYS FOR SUITABILTY OF SURFACE. WHILE THIS PANEL HAS BEEN TESTED ON THE RECOMMENDED SURFACES IN VARYING CONDITIONS, WE CANNOT GUARANTEE THAT UNDER ALL CIRCUMSTANCES THE MATERIAL WILL STAY COMPLETELY INTACT AND THAT THE PRODUCT WILL PROPERLY ADHERE TO THE SURFACE. THIS PRODUCT IS NOT DESIGNED TO BE REMOVABLE. DAMAGE MAY OCCUR IF THIS PRODUCT IS REMOVED AFTER APPLICATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>