Yongway HI-S320PWX Solar Power Bank User Manual
- July 22, 2024
- Yongway
Table of Contents
Yongway HI-S320PWX Solar Power Bank User Manual
User Manual
SOLAR POWER BANK
MODEL: HI-S320PWX
[u363]
: chargers@support20h.com
: Top Outdoor Products Support
: 1(866) -781-6628
Kindly Remind:
If you encounter a problem when using this product, but the return window has
been closed. You can contact us via the Service Email
(chargers@support20h.com), we will send you
a Replacement or Refund.
Layout
Specification
How to use the Flashlight?
Press and hold the power button for 3 seconds to turn the flashlight on or off. When the flashlight is on, short press to switch between strong-SOS- strobe-off.
How to recharge the Solar Charger?
1. By USB Cable (Use PD/QC adapter to achieve faster charging).
2. By Built-in USB-C Cable
3. Solar Charging
Position the solar charger outdoors where direct sunlight hits. The screen will illuminate with a green light and blinking numbers, signaling the charging process. Once it reaches 100 on the display, charging is complete, and you can bring the solar charger indoors. Remember to keep the port cover closed while charging outdoors. Do not leave the Solar Charger in an unattended vehicle, as the high temperature can damage the unit.)
Charge Your Phone or Tablet
How to Charge Your Phone by Wireless Charging Function?
P.S. Your phone must be equipped with Qi charging function.
Reminder
- Fully charge the solar charger before first-time use.
- When the solar charger has only 10% or less battery remaining, please stop charging your devices and recharge the solar charger as soon as possible.
- When charging your phone, please use the original cable provided with your phone to ensure intelligent recognition and rapid charging.
- To extend battery life, fully charge the unit with a wall charger every 3 months.
- Avoid scratching the solar panels.
- Solar charging speed is subject to sun intensity, temperature and weather conditions.
- Therefore, it is recommended to use it as a backup power source only.
- Do not place the solar charger into fire or water.
- It is normal for the solar charger to become slightly warm during charging or discharging.
WARNING
- This product is not a toy, please keep it out of the reach of children to avoid accidents.
- When charging the product outdoors using solar power, please bring it back inside after sunset. Humid weather at night may cause short circuits and battery failure.
- The operating temperature of this product is 0°C~45°C (32°F~113°F). Please do not expose it to temperatures above 60°C (140°F) , including areas near heat sources such as stoves or heaters.
- This product contains a Li-polymer battery, so it is strictly prohibited to disassemble squeeze, puncture, or expose it to water or fire, as it may damage the battery, cause short circuits, fires, or burning.
- If there is bulging, deformation, liquid leakage, overheating, or significant power loss, please stop using it immediately, dispose of it properly, and contact us for a replacement or a full refund.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>