ErgoArc VM1B Wireless Mouse User Manual

ErgoArc VM1B Wireless Mouse

WIRELESS MOUSE
User Manual

Packing List

DESCRIPTION

1. DIP Button
2. Scroll Wheel
3. Right Button
4. Backward Button
5. Forward Button
6. LeftButton
7. Charging Port
8. Mode Switch Button
9. Light Switch Button
10. Switch
11. Power Indicator Light
12. USB Receiver

Mouse Features

1. Multiple Modes to Switch: There are 3 modes as BT1, BT2 and 2.4G, which can separately connect to 3 devices. You can switch the mode via the bottom mode switch button.
2. The mouse is equipped with 5 DPI (800/1200/1600/2400/3200). You can switch them cyclically by pressing DPI button.
3. Power Saving Mode: The mouse will automatically enter sleep mode if it’s unused for 10 min, and it can be woken up by moving.
4. RGB Lighting: short press the light button on the bottom of mouse to switch among 4 lighting modes in cycle. Long press 3 second to turn off or turn on light.
5. Built-in 500 mA lithium battery. It works half a month with the light on and 2 months with the lights off.
6. Rechargeable Mouse: charge with the included charging cable. The indicator light will flash quickly when in low battery, stay steady when charging and turn off when fully charged.

Note : devices. Forward and backward buttons are not available on Mac OS

Instructions

First Use

1. Take out the mouse and turn on the bottom switch.
2. The mouse default is BTl mode with its indicator light flashing slowly. Long press the mode switch button for 3 s, and the mouse will enter into Bluetooth pairing state after the indicator light turns to flash quickly.
3. Turn on the Bluetooth on your laptop. For Window 7 or earlier system, please select “BT3.0 Mouse”. For Window 8 or later system, iOS, MacOS, please select “BT5.0 Mouse”. You can use after successful connection.

Mode Switch

1. BT2 Mode. Short press the bottom mode switch button to switch the mouse to B12 mode. B12 indicator light will flash slowly. Then refer to the BTl connection steps for connection.
2. 2.4G Mode: Short press the bottom mode switch button to switch the mouse to 2.4G mode, and the indicator light will flash slowly. Plug the USB receiver in computer port, and the mouse is workable after it’s paired with the computer automatically.

Solutions for 2.4G Connecting Problems
Repeat the pairing steps after confirming that mouse is under in 2.4G mode. Press left button, right button and scroll wheel simultaneously for 3-5 seconds, and release them after the indicator light flashes quickly. Then plug USB receiver in computer port for pairing.

Solutions for BT1/BT2 Connecting Problems
Reboot the mouse and empty the Bluetooth list on your computer. Repeat the connecting steps according to the instructions of BT1/BT connection.

Note: If the product is still unworkable after above solutions, you could repeat those steps for a few times. If your problem can’t get solved yet, please contact our Customer Service for help (Email: csforcustomer@gmail.com).

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>