YULIKA U5 Automatic Intelligent Toilet Instruction Manual

YULIKA U5 Automatic Intelligent Toilet

Specifications

• Model: YULI KA U5
• Power Supply: AC 220/110V
• Grounding Resistance: Below 100
• Ground Wire Diameter: 1.6mm or more

Product Usage Instructions
Safety Precautions
Before installing and using the product, please read the safety precautions carefully:

• Avoid placing the product where it may get wet.
• Do not drop the remote control into water.
• Avoid spraying water into the product or plug.

First Use of Intelligent Toilet

1. Insert the power plug into an AC (AC) 220/110V socket.
2. Check if the indicator on the digital display panel is lit.
3. Confirm that the inlet valve is open.
4. Ensure the hose between the wall Angle valve and the toilet inlet valve is correctly installed.

Caution Before Using

1. Check for leaks in the sprinkler head and water pipe.
2. Press around the seat sensor to check for any sounds.
3. Verify that cleaning, drying, automatic deodorization, and flushing functions are normal.
4. Check the Damped structure for normal operation.

Socket and Power Supply
The power distribution socket should be set with precautions:

• Install the product away from water splashes or high humidity.
• Use a ground wire connection to prevent electric shock risks.
• Ensure proper grounding resistance and wire diameter for safety.

Bathroom Usage
When using in the bathroom, ensure:

• Good air flow by installing a vent.
• Proper waterproof processing of the power plug using silica gel.

FAQ
Q: What should I do if the indicator on the digital display  panel is not lit?
A: Check the power plug connection and socket for proper power supply. If issue persists, consult with a professional electrician.

INSTRUCTIONS FOR THE USE OF PRODUCTS

Please cautiously read before installing and using.

Safety directory
Warning-To avoid electric shock

1. Do not place the product where it may get wet.
2. Do not drop the remote control into the water.
3. Do not spray water into the product or plug.

Warning:To prevent the possibility of burns, electric shocks,fires and injuries.

1. Young children, temperature-insensitive users, when using this product, should be accompanied by others. And turn off or lower the seat temperature.
2. The product is limited to the function on the manual, do not use other equipments.
3. Do not continue to use when the product is out of order, damaged or flooded. Please send the product to the designated repair center for repair.
4. Please make sure that the wires are not damaged by burning.
5. Do not use this product when you are out of your mind.
6. Do not plug the product or pipe.
7. Do not used outdoors.

Note: To ensure the normal use of the product, please follow the instructions to text.

The first use of Intelligent toilet

1. Insert the power plug into the AC (AC) 220/110V socket
2. Please confirm whether the indicator of the digital display panel is lit
3. Confirm whether the inlet valve is take on
4. Whether the hose between the wall Angle valve and the toilet inlet valve is installed in place

Caution-Confirmed matters before using

1. Check whether the sprinkler head and water pipe leak, dry all parts of the water pipe and check with blotting paper.
2. Press the seat around the seat sensor, whether there is a sound.
3. Check whether the cleaning, drying, automatic deodorization and automatic flushing are normal
4. .Whether the Damped structure is normal.

Check the functions of cleaning, drying and automatic deodorization, make sure the sensor is on.When cleaning,
cover and block the spray nozzle, so as not to splash.

Safety Caution

Please read carefully before using. The cautions listed here are related to safety and please follow.
This product is an electrical product. Please do not install it in a place where it is easy to be splashed by water or high humidity. When using in the bathroom, please install a vent to keep good air flow in the bathroom.
The socket for power distribution should be set as follows

• The gearing position of electric outlet pleases to give examples 0.3 min the ground above, and leave bathtub as far as possible a little bit farer.
• The back track of electric outlet pleases use a high feeling and rapid type electric leakage switch (the sum certainly responds the electric current 15 mA following) or use to insulate the transformer 1.5 KVA above, the 3 KVA is following) Carry on a protection.

Warning – Be sure to firmly connect ground wires

• The power plug of this product is a three-phase plug (with ground wire).
• There is a danger of electric shock when there is a fault or leakage of electricity.
• If there is no ground plug in the socket, consult with the electrical installation company.
• Do not use power supply other than AC 220V/110V, please wiring according to relevant regulations.

The product connects a ground of line to carry on to connect a ground of processing, if has never carried on to connect a ground of processing, may arouses to get an electric shock.

Note: the grounding treatment mentioned here means that the grounding resistance is below 100Ω, and the grounding wires of the switchboard shall be copper wires with a diameter of more than 1.6mm.
While using in the bathroom please confirm the power plug have already used silica gel to carry on a waterproof processing.
Using the wrong power supply can easily cause fire

Please be sure to observe the following

• Please don’t sprinkle urine at the essence and spray.
• Pull out the plug when it thunders.
• Strictly forbid to directly flush with water.
• Please do not wipe seat and cover with dry cloth or toilet paper.

Please take antifreeze measures to prevent damage caused by freezing.

Please do not open the seat ring or cover violently.
May cause cracking or malfunction.

Please do not put heaters near this product.

• Discoloration or malfunction will occur

Safety Caution

Please read carefully before using.
The cautions listed here are related to safety and please follow.

Must obey

Notice heat burn

• Please turn the seat temperature down or off when sitting on the toilet for a long time.
• Please set the temperature to room temperature when the following persons use the seat to dry gently.
• Children, the elderly, the sick, the disabled, etc.
• People who take sleeping pills, get drunk and get overtired.

Do not use any power source other than AC 220V/110V

• It may start a fire
• Keep cigarettes and other fire kindling away from the product
• It may start a fire
• Do not use loose and unstable  power sockets
• It may cause fire or electric shock

Please don’t sprinkle water or rinse on the product essence or the power plug.

• May arouse a fire or get an electric shock
• May cause toilet break, damage or indoor seepage.

When long time didn’t use, please pull out the power plug.

• For safety, please pull out the power plug
• For re-use, please drain water for one minute before use.

Please do not flush other items except for urine and feces

• May cause then block, sewage outside overflows.

Do not unplug the power plug with wet hands

• It may cause electric shock

Do not distort or damage the water inlet – It may cause a leak

Prohibit

Do not continue to use the product when it breaks down
When the following occurs, please unplug the power plug, close the inlet Angle valve, stop the inlet.

• Ceramic WC is leaking
• Cracks appear
• Abnormal sound and smell
• Fume-off
• Abnormal heating
• The toilet is clogged
• If continued under the condition of failure, it may cause fire, electric shock or indoor seepage problems

Do not disassemble, repair or transform the product without permission

• It may cause a fire or electric shock

Do not install this product in damp places such as bathrooms

• It may cause a fire or electric shock

Do not damage the power cord or toilet seat cable

• Don’t pull
• Don’t process
• Don’t heat
• Don’t forcibly bent
• Do not place heavy objects on the power cord and toilet seat connection line.
• May cause fire, electric shock or short circuit. If the power supply is damaged, please contact a professional for repair.

Do not use extension wires. otherwise, it may cause a fire or electric shock

• Do not connect wires or use extension cords, which may cause fire and electric shock.

Do not use unhealthy water

• May cause skin irritation and other problems

Description of other functions

Note: Please read the following carefully before use

Flushing by hand conduction
Press remote or intelligent control board for flushing , start flushing function (manual open cover)

Hand conduction open over and flip function
Press remote or intelligent control board for opening cover/flip , auto open/off seat and flip (auto open cover)

Radar automatic open cover function
When approaching the toilet , auto open cover , auto off seat and finish flushing when leaving (auto open cover)

Daily cleaning and maintenance

Note: During cleaning and maintenance, please be sure to unplug the power switch and power off

Smart toilet cleaning and maintenance methods

Please wipe it with a soft cloth dampened with water

• If the dirt is not removed in time, it will become difficult to clean, please wipe with water sometimes.
• Static electricity will absorb dust, resulting in the product black, dirty, water wipe can prevent the generation of static electricity.
• The ceramic body can be removed from the toilet seat to facilitate cleaning between the toilet seat and the ceramic body.

Cleaning and maintenance of spray head

If there is dirt in the nozzle. Please clean it with a small brush such as a toothbrush.

• Do not stretch and bend the spray head.

Must obey

Clean the dust on the power plug regularly

• When cleaning, remove the power plug and wipe with a dry cleaning cloth. – Poor insulation may cause a fire.

1. Radar switches to foot cover: press the cover button on the remote control for 5 seconds,
2. Turn off | turn on disseat water flushing: press the automatic water flushing button on the remote control for 5 seconds
3.  Turn off | turn on the function of flushing upon cover falling: press the cover and flushing buttons on the remote control at the same time

With Auto Open Cover Flip Remote Control

Note: Please read the following carefully before use

Common fault diagnosis

Note: If similar fault is found, please read the following solution or contact after sales

Due to the different printing time of the materials, the product specifications may be slightly changed.Please refer to the material object.

Product standard

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>