NXR 880-0022B Burner Portable Gas Grill User Manual
- July 16, 2024
- NXR
Table of Contents
- NXR 880-0022B Burner Portable Gas Grill
- Product Information
- Product Usage Instructions
- FAQ
- CARE AND MAINTENANCE
- TECHNICAL DESCRIPTION
- PARTS LIST
- ASSEMBLY INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- STATEMENT
- LIGHTING INSTRUCTIONS
- LIMITED WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NXR 880-0022B Burner Portable Gas Grill
Product Information
Specifications
- Model Number: 880-0022B
- Warranty: Limited warranty covering defects in workmanship and materials under normal home use
- Manufacturer: DURO Corporation
- Customer Service Contact: 1-888-909-8818, nxrcs@duro-global.com
Product Usage Instructions
Assembly
- Ensure correct assembly according to the provided instructions in the manual.
Usage
- Use the product under normal and reasonable home conditions.
Cleaning and Maintenance
- Regularly clean the product using a mild detergent and water.
- Avoid using abrasive cleaners that may damage the materials.
Troubleshooting
- If you encounter any issues with the product, contact customer service for assistance.
FAQ
Q: What is covered under the limited warranty?
A: The limited warranty covers defects in workmanship and materials under normal home use for a specified period.
Q: How can I request warranty service?
A: To request warranty service, contact DURO Corporation at the provided address or phone number.
Q: Are there any exclusions to the warranty?
A: Some states may have limitations on incidental or consequential damages; refer to the warranty terms for details.
- IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
- Warning: For outdoor use only.
- Read and follow all warnings and instructions before assembling and using the appliance. Follow all warnings and instructions when using the appliance.
- Keep this manual for future reference.
- This instruction manual contains information necessary for the proper assembly and safe use of the appliance.
- Do not leave the appliance unattended. Keep young children and pets away.
- Do not move the device during use.
- Not intended to be installed in or on boats and should never be used as a heater.
- Close the valve of the gas cylinder after use.
DANGER If you smell gas:
- Shut off the gas to the appliance.
- Extinguish an open flame.
- Open lid.
- If the odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.
- Failure to follow these instructions could result in fire or explosion which could cause property damage, personal injury, or death.
WARNING
- Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
- Any propane cylinder not connected for use should not be stored in the vicinity of this or any other appliance.
- Never operate this appliance unattended.
- This appliance is not intended for commercial use.
California Proposition 65
- WARNING: This product can expose you to Chemicals including Carbon Monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
- WARNING: This product can expose you to Carbon Monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
- Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-909-8818, 9 a.m.-5 p.m., PST, Monday-Friday.
- English, French, and Spanish representatives are available. Send email to: nxrcs@duro-global.com
CARE AND MAINTENANCE
Precautions
-
WHEN USING THE GRILL, DO NOT TOUCH THE GRILL RACK, BURNER GRATE, OR IMMEDIATE SURROUNDINGS THAT BECOME EXTREMELY HOT DURING USE AND CAN CAUSE BURNS.
-
AVOID ALLOWING EXCESS GREASE TO COLLECT IN THE GREASE TRAY AT THE BOTTOM OF THE GRILL FIREBOX. CLEAN THE GREASE TRAY OFTEN.
-
FOR PROPER BURNER LIGHTING AND PERFORMANCE, KEEP THE BURNER PORTS CLEAN. IT IS NECESSARY TO CLEAN THEM PERIODICALLY FOR OPTIMUM PERFORMANCE.
-
CLEAN THE GRILL WITH CAUTION. TURN OFF ALL CONTROL KNOBS AND MAKE SURE THE GRILL IS COOL BEFORE CLEANING. WHEN USING AEROSOL SPRAY TO CLEAN BURNERS, BE VERY CAREFUL. ENSURE THAT THE EQUIPMENT IS COOL BEFORE USING AN AEROSOL SPRAY AS THE PRESENCE OF HEAT COULD CAUSE IT TO CORRODE OR LIGHT THE EQUIPMENT ON FIRE.
-
DO NOT USE THE GRILL FOR COOKING EXCESSIVELY FATTY MEATS OR PRODUCTS WHICH CAN CAUSE
-
FLARE-UPS. DO NOT OPERATE THE GRILL UNDER UNPROTECTED COMBUSTIBLE CONSTRUCTION. USE ONLY IN WELL-VENTILATED AREAS. DO NOT USE IN BUILDINGS, GARAGES, SHEDS, BREEZEWAYS, OR OTHER SUCH ENCLOSED AREAS. THIS UNIT IS FOR OUTDOOR USE ONLY.
-
CAUTION: BEWARE OF FLASHBACK
-
CAUTION: SPIDERS AND SMALL INSECTS OCCASIONALLY SPIN WEBS OR MAKE NESTS IN THE GRILL BURNER TUBES DURING TRANSIT AND WAREHOUSING. THESE WEBS CAN LEAD TO GAS FLOW OBSTRUCTION, WHICH COULD RESULT IN A FIRE IN AND AROUND BURNER TUBES. THIS TYPE OF FIRE IS KNOWN AS“FLASH-BACK” AND CAN CAUSE SERIOUS DAMAGE TO YOUR GRILL AND CREATE AN UNSAFE OPERATING CONDITION FOR THE USER.
ALTHOUGH AN OBSTRUCTED BURNER TUBE IS NOT THE ONLY CAUSE OF “FLASH-BACK,” IT IS THE MOST COMMON CAUSE. -
TO REDUCE THE LIKELIHOOD OF“FLASH-BACK” YOU MUST CLEAN THE BURNER TUBES.
PROPER PLACEMENT AND CLEARANCE OF GRILL
- Never use your gas grill in a garage, porch, shed, breezeway, or any other enclosed area. Your gas grill is to be used outdoors only.
- DO NOT install this unit into combustible enclosures.
- Minimum clearance from the sides and back of the unit to combustible construction, 61 cm (24 inches) from both sides and 61 cm (24 inches) from the back.
- DO NOT use this appliance under overhead combustible surfaces. This outdoor cooking gas appliance is not intended to be installed in or on recreational vehicles and/or boats.
- DO NOT obstruct the flow of ventilation air around the gas grill housing. Only use the regulator and the hose assembly supplied with your gas grill. Replacement regulators and hose assemblies must be those specified in this manual.
- The regulator and hose assembly must be inspected before each use of the grill. If there is excessive abrasion or wear or if the hose is cut, it must be replaced before the grill is put into operation.
- The replacement hose assembly shall be that specified by the manufacturer.
- This outdoor cooking gas appliance is equipped with a pressure regulator that complies with the standard for pressure regulating valves for LP Gas ANSI/ UL 144.
- DO NOT use briquettes of any kind in the grill.
- Never use the grill in extremely windy conditions. If located in a consistently windy area (oceanfront, mountaintop, etc.) a windbreak will be required. Always adhere to the specified clearance.
- Never use a dented or rusty propane tank.
- Keep any electrical cords and the fuel supply hose away from any heated surface.
- While lighting, keep your face and hands as far away from the grill as possible.
- Burner adjustment should only be performed after the burner has cooled.
WARNING
- Always operate the grill on a tabletop, no higher than 81 cm (32 inches).
- Place the propane tank on the ground immediately adjacent to the tabletop, no further than 61 cm (24 inches) from the grill.
- Failure to follow these instructions could cause the propane tank to overheat and vent propane which could ignite causing serious personal injuries or property damage and/or a tripping hazard over the gas hose or propane tank, pulling the grill off the tabletop causing serious personal injuries or property damage.
TECHNICAL DESCRIPTION
PREPARATION
- Before beginning assembly, make sure all parts are present. Compare parts with the package contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product.
- Contact customer service for replacement parts.
- Estimated Assembly Time: 10 minutes
Tools Required for Assembly:
- Phillips Screwdriver (not included) and wrench (not included)
- Note: The right and left sides of the grill are designated as if you are facing the front of the grill.
PARTS LIST
No.| Part Description| QTY.| No.| Part Description|
QTY.
---|---|---|---|---|---
01| Logo| 1| 12| Knob Bezel| 3
02| Main Lid| 1| 13| Control Knob| 3
03| Main Lid Hinge Bolt| 2| 14| Foot Stand Leg, Left| 1
04| M6 Screw| 2| 15| Cooking Grid| 1
05| “R” Pin| 2| 16| Flame Tamer| 3
06| Lid handle Insulating Spacer| 2| 17| Main Burner| 3
07| Lid Handle| 1| 18| Main Burner supporter| 3
08| Main Firebox| 1| 19| Regulator and Hose| 1
09| Lightning Rod| 1| 20| Grease Tray| 1
10| Gas Valve| 1| 21| Foot Stand Leg, Right| 1
11| Control Panel| 1| | |
ASSEMBLY INSTRUCTIONS
Note: When not in use, please place the regulator on the grill handle. This will protect the regulator.
Tank Installation
- If the outdoor cooking gas appliance is not in use, the gas must be turned off at the supply cylinders.
- Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder(s) is/are disconnected and removed from the outdoor cooking gas appliance.
- Cylinder(s) must be stored outdoors and out of the reach of children. It must NOT be stored in a building, garage, or any other enclosed area.
- The cylinder (s) used must include a collar to protect the cylinder valve. The specific size and capacity of 9kg. (20lb). L.P. cylinder 46.35cm (18.25in) high, 31cm (12.25in) diameter cylinder(s) to be used only.
- Note: Always keep the cylinder at 90° (upright) orientation to provide vapor withdrawal.
- Keep the fuel supply hose away from any heated surface(s).
INSTALLATION INSTRUCTIONS
GAS HOOK-UP
- Only the pressure regulator and hose assembly suitable for the grill should be used. Any replacement pressure regulator and hose assembly must be specified by the grill manufacturer.
- This grill is configured for propane. Do not use a natural gas supply.
- Main burner 2.3 kW (8000 BTU).
- Total: 3 main burners 6.9 kw (24000 BTU).
TESTING FOR LEAKS
GENERAL
- Although all gas connections on the grill are leak tested at the factory before shipment, a complete gas tightness check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit. Periodically check the whole system for leaks following the procedures listed below.
- If the smell of gas is detected at any time you should immediately check the entire system for leaks.
BEFORE TESTING
- Make sure that all packing material is removed from the grill including the burner tie-down straps. DO NOT SMOKE WHILE TESTING FOR LEAKS. NEVER PERFORM LEAK TEST WITH AN OPEN FLAME.
- Make a soap solution of one part liquid detergent and one part water. You will need a spray bottle, brush, or rag to apply the solution to the fittings. For the initial leak test, make sure the L.P. cylinder is full.
TO TEST
- Make sure the control valves are in the “OFF” position, and turn on the gas supply.
- Check all connections from the LP gas regulator and supply valve up to and including the connection to the manifold pipe assembly (the pipe that goes to the burners). Soap bubbles will appear where a leak is present.
- If a leak is present, immediately turn off the gas supply and tighten the leaky fittings.
- Turn the gas back on and recheck.
- Should the gas continue to leak from any of the fittings, turn off the gas supply and contact customer service at 1-888-909-8818, 9 a.m.-5 p.m., PST, Monday-Friday. English, French, and Spanish representatives are available.
- Only those parts included by the manufacturer should be used on the grill.
- The substitution will void the warranty. Do not use the grill until all connections have been checked and do not leak.
GAS FLOW CHECK
- Each grill burner is tested and adjusted at the factory before shipment; however, variations in the local gas supply may make it necessary to adjust the burners. The flames of the burners should be visually checked.
- Flames should be blue and stable with no yellow tips, excessive noise, or lifting. If any of these conditions exist, check to see if the air shutter or burner ports are blocked by dirt, debris, spider webs, etc.
- If you have any questions regarding flame stability, please call customer service at 1-888-909-8818, 9 a.m.-5 p.m., PST, Monday-Friday. English, French, and Spanish representatives are available.
ALWAYS CHECK FOR LEAKS AFTER EVERY L.P. TANK CHANGE
Check all gas supply fittings for leaks before each use. It is handy to keep a spray bottle of soapy water near the shut-off valve of the gas supply line. Spray all the fittings. Bubbles indicate leaks.
- Warning: This grill is configured for propane. Do not use a natural gas supply.
- NOM requires the conversion must be performed by a qualified installer or gas supplier under the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction.
- Failure to follow ALL instructions could result in serious injury or property damage.
- The qualified agency performing this work assumes ALL responsibility and liability for this conversion.
STATEMENT
- The LP gas supply cylinder(s) to be used must be:
- a) Constructed and marked in accordance with the Specifications for LP-Gas Cylinders of the U.S. Department of Transportation (D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders,
- Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable
- b) Provided with a listed overfilling prevention device.
- c) Provided with a cylinder connection device compatible with the connection for outdoor cooking appliances.
- The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases ANSI/NFPA 58; Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2, or the standard for Recreational Vehicles.
- This outdoor cooking gas appliance is not intended to be installed in or on boats.
- Checking orifices alignment with burners
- a) Orifices on the valve may shift during assembly and movement. Check the orifice’s alignment with the burners according to the following illustrations before lighting.
- Maintenance instructions:
- a) Keep outdoor cooking gas appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
- b) DO NOT obstruct the flow of combustion and ventilation air.
- c) Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
- d) Visually check the burner flames before each use, the flames should look like this picture. If they do not, refer to the burner maintenance part of this manual.
- e) Check and clean the burner tubes for insects and insect nests. A clogged tube can lead to a fire beneath the grill.
LIGHTING INSTRUCTIONS
Before Lighting
- Inspect the gas supply hose before turning on the gas. If there is evidence of cuts, wear, or abrasion, it must be replaced before use.
- Connect the regulator to the cylinder, and leak-check the hose and regulator connections before operating the grill.
- Only the pressure regulator and hose assembly supplied with the unit should be used. Never substitute regulators. If a replacement is necessary, contact customer service for proper replacement.
- WARNING Do not use the grill if the odor of gas is present.
TO LIGHT THE MAIN BURNERS
- OPEN LID AND MAKE SURE ALL KNOBS ARE IN THE OFF POSITION.
- TURN ON THE CYLINDER VALVE. PUSH AND TURN THE BURNER KNOB SLOWLY TO“MAX” THEN RELEASE THE KNOB.
- IF IGNITION DOES NOT OCCUR IN 5 SECONDS, TURN THE BURNER CONTROL(S) OFF, WAIT 5 MINUTES, AND REPEAT THE LIGHT PROCEDURE.
TO LIGHT THE GRILL WITH MATCH
If a burner will not light after several attempts using the control knobs, the burners may be lit with a match.
- WARNING When lighting, keep your face and hands as far away from the grill as possible.
- WARNING Before lighting, please check the hose connection with proper procedure. If leaking, turn the gas off.
- CAUTION When using a match to light the grill make sure to use the attached lighting rod.
- CAUTION Remove the warming rack when using a match to light the grill.
- If you have already attempted to light the main burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.
- Insert a match into the lightning rod.
- Ignite the match and insert it through the cooking grids to the burner.
- If the burner does not light within seconds turn the knob to the “OFF” position, wait 5 minutes, and try again.
- WARNING Do not store a spare LP-Gas cylinder under or near the appliance.
- WARNING Never fill the cylinder beyond 80 percent full.
- WARNING If the information in the above warning is not followed exactly, a fire causing death or serious injury may occur.
LIMITED WARRANTY
- DURO warrants to the original consumer-purchaser only that this product (Model #880-0022B) shall be free from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated below beginning on the date of purchase. The manufacturer reserves the right to require photographic evidence of damage, or that defective parts to be returned, postage and or freight Prepaid by the consumer, for review and examination.
- Stainless steel tube burners: 3-year warranty.
- Other burners (Searing & rotisserie): 3-year warranty.
- Flame tamers : 3-year LIMITED warranty; does not cover dropping, chipping, scratching, or surface damage.
- Cooking grids: 3-Year LIMITED warranty; does not cover dropping, chipping, scratching, or surface damage.
- Stainless steel parts: 2-Year LIMITED warranty against perforation; does not cover cosmetic issues like surface corrosion, scratches, and rust.
- All other parts: 2-year LIMITED warranty (Includes, but not limited to, valves, frame, housing, control panel, igniter, regulator, and hoses); does not cover chipping, scratching, cracking surface corrosion, scratches, or rust.
- Upon the consumer supplying proof of purchase as provided herein, the Manufacturer will repair or replace the parts that are proven defective during the applicable warranty period. Parts required to complete such repair or replacement shall be free of charge to you except for shipping costs, as long as the purchaser is within the warranty period from the original date of purchase. The original consumer-purchaser will be responsible for all shipping charges for parts replaced under the terms of this limited warranty.
- The manufacturer requires reasonable proof of your date of purchase. Therefore, you should retain your sales receipt and/or invoice. If the unit was received as a gift, please ask the gift-giver to send in the receipt on your behalf, to the below address. Defective or missing parts subject to this limited warranty will not be replaced without registration or proof of purchase. This limited warranty applies to the functionality of the product ONLY and does not cover cosmetic issues such as scratches, dents, corrosion or discoloration by heat, abrasive and chemical cleaners or any tools used in the assembly or installation of the appliance, surface rust, or the discoloration of stainless steel surfaces. Surface rust, corrosion, or powder paint chipping on metal parts that do not affect the structural integrity of the product is not considered a defect in workmanship or material and is not covered by this warranty. This limited warranty will not reimburse you for the cost of any inconvenience, food, personal injury, or property damage.
- If an original replacement part is not available, a comparable replacement part will be sent. You will be responsible for all shipping charges for parts replaced under the terms of this limited warranty.
ITEMS MANUFACTURER WILL NOT PAY FOR:
- Service calls to your home.
- Repairs when your product is used for other than normal, single-family household or residential use.
- Damage resulting from accident, alteration, misuse, lack of maintenance/cleaning, abuse, fire, flood, acts of God, improper installation, and installation not by electrical or plumbing codes or use of products not approved by the manufacturer.
- Any food loss due to product failures.
- Pickup and delivery of your product.
- Postage fees or photo processing fees for photos sent in as documentation.
- Repairs to parts or systems resulting from unauthorized modifications made to the product.
- The removal and/or re-installation of your product.
- Shipping cost, standard or expedited, for warranty/nonwarranty and replacement parts.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
- Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty.
- The manufacturer will not be responsible for any consequential or incidental damages arising from the breach of either this limited warranty or any applicable implied warranty or for failure or damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration, replacement of parts by anyone other than Manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering), improper installation or installation not under local codes or printed manufacturer instructions.
- THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO PRODUCT PERFORMANCE SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY THE MANUFACTURER EXCEPT TO THE EXTENT OUTLINED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY STATE, INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
- Neither dealers nor the retail establishment selling this product has any authority to make any additional warranties or to promise remedies in addition to or inconsistent with those stated above.
- The manufacturer’s maximum liability, in any event, shall not exceed the documented purchase price of the product paid by the original consumer.
- This warranty only applies to units purchased from an authorized retailer and or re-seller.
- NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or exclusions may not apply to you; this limited warranty gives you specific legal rights as set for herein.
- You may also have other rights which vary from state to state.
- If you wish to obtain performance of any obligation under this limited warranty, you should write to.
- DURO CORPORATION
- 918 Canada Ct,
- City of Industry, CA 91748 USA
- All consumer returns, parts orders, general questions, and troubleshooting assistance can be acquired by calling our customer service department at 1-888-909-8818, 9 a.m.-5 p.m.
- PST, Monday-Friday (English/French/Spanish). Send email to:nxrcs@duro-global.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>