Haier HW105-BP1239S8 Front Load Washing Machine User Manual

Haier HW105-BP1239S8 Front Load Washing Machine

Specifications

• Model: HW105-BP1239S8, HW80-BP1239S8
• Brand: Haier
• Intended Use: Household and similar applications
• Age Recommendation: Children aged 8 years and above

Product Usage Instructions

• Safety Information:
  • Before switching on the appliance for the first time read the following safety hints!
• Before First Use:
  • This appliance is heavy.
• Daily Use:
  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities if supervised.
  • Keep away children under 3 years of age from the appliance unless supervised.
  • Do not let children or pets come close to the appliance when the door is open.
  • Store washing agents out of reach of children.
  • Pull up zips, fix loose threads, and take care of small items to prevent hazards.
• Daily Use Safety Tips:
  • Do not remove or insert the plug in the presence of flammable gas.
  • Do not hot wash foam rubber or sponge-like materials.
  • Do not wash any laundry that is polluted with flour.
  • Do not open the detergent drawer during any wash cycle.
  • Do not touch the door during the washing process as it gets hot.
  • Do not open the door if the water level is visibly over the porthole.
  • Do not force the door to open; it will unlock after the washing procedure is completed.
  • Do not try to repair the appliance by yourself; contact customer service for repairs.
  • Remove all foreign objects such as metal objects, chemicals, fragile goods, lighted candles, lighted cigarettes, etc., from the appliance before use.

FAQs

• Q: Can children under 3 years old use this appliance?
  • A: No, children under 3 years old should be kept away from the appliance unless constantly supervised.
• Q: What should I do if the supply cord is damaged?
  • A: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.

Thank You

• Thank you for purchasing a Haier Product.
• Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
• Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
• If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings.

Legend

• Warning – Important Safety information
• General information and tips
• Environmental information

Disposal

• Help protect the environment and human health. Put the packaging in applicable containers to recycle it.
• Help to recycle waste of electrical and electronic appliances.
• Do not dispose appliances marked with this symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

WARNING!

Risk of injury or suffocation! Disconnect the appliance from the mains supply. Cut off the mains cable and dispose of it. Remove the door catch to prevent children and pets to get closed in the appliance.
WARNING!

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
  • areas for communal use in blocks of flats or in launderettes.

Safety information

Before switching on the appliance for the first time read the follow-ing safety hints!

WARNING! Before first use

• Make sure there is no transport damage.
• Make sure all transport bolts are removed.
• Remove all packaging and keep out of children´s reach.
• Handle the appliance always with at least two persons because it is heavy.

Daily use

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Keep away children under 3 years of age from the appliance un-less they are constantly supervised.
• Children shall not play with the appliance.
• Do not let children or pets come close to the appliance when the door is open.
• Store washing agents out of reach of children.
• Pull up zips, fix loose threads and take care for small items to prevent laundry from being entangled. If necessary, use an appropriate bag or net.
• Do not touch or use the appliance when barefoot or with wet hands or feet.
• Do not cover or encase the appliance during operation or afterward to allow any moisture or dampness to evaporate.
• Do not place heavy objects or sources of heat or dampness on top of the appliance.
• Do not use or store flammable detergent or dry cleaning agent in close vicinity to the appliance.
• Do not use any flammable sprays in close vicinity to the appliance.
• Do not wash any garments treated with solvents in the appliance without having dried them previously in the air.

WARNING! Daily use

• Do not remove or insert the plug in the presence of flammable gas.
• Do not hot wash foam rubber or sponge-like materials.
• Do not wash any laundry that is polluted with flour.
• Do not open the detergent drawer during any wash cycle.
• Do not touch the door during the washing process, it gets hot.
• Do not open the door if the water level is visibly over the porthole. Do not force the door to open. The door is fitted with a self-lock device and will open shortly after the washing procedure is ended.

Maintenance/cleaning

• Make sure children are supervised if they carry out cleaning and maintenance.
• Disconnect the appliance from the electrical supply before undertaking any routine maintenance.
• Keep the lower part of the porthole clean and open the door and de- tergent drawer if the appliance is not in use to prevent odors.
• Do not use water spray or steam to clean the appliance.
• Replace a damaged supply cord only by the manufacturer, its service agent or similarly qualified persons to avoid a hazard
• Do not try to repair the appliance by yourself. In case of repair please contact our customer service.
• Remove all foreign objects such as metal objects, chemicals, fragile goods, lighted candles, lighted cigarettes, etc. from the appliance.

Installation

• The appliance should be placed in a well-ventilated place. Ensure a location which allows opening the door fully.
• Never install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak cut power supply and allow the nachine to dry naturally.

WARNING! Installation

• Install or use the appliance only where the temperature is above 5 °C.
• Do not place the appliance directly on a carpet, or close to a wall or furniture.
• Do not install the appliance in direct sunlight or in the near of heat sources(e.g. stoves, heaters).
• Make sure that the electrical information on the rating plate aligns with the power supply. If not, contact an electrician.
• Do not use multi-plug adapters and extension cables.
• Make sure only the delivered electric cable and hose set are used.
• Make sure not to damage the electric cable and the plug. If dam- aged have it replaced by an electrician.
• Use a separate earthed socket for the power supply which is easy accessible after installation. The appliance must be earthed.
• Special reminder: The appliance’s power cable is fitted with 3-cord (grounding) plug that fits a standard 3-cord (grounded) socket.
• Never cut off or dismount the third pin (grounding). After the ap- pliance is installed, the plug should be accessible.
• Make sure the hose joints and connections are firm and there is no leakage.

Intended use

• This appliance is intended for washing machine-washable laun- dry only. Anytime follow the instructions given on the label of each house lanet intends ord excusell rindustriat i use inside the
• Changes or modifications to the device are not allowed. Unintended use may cause hazards and loss of of all warranty and liability claims.

Product description

Note: Due to technical changes and different models, the illustrations in the following chap- ters may differ from your model.

Picture of appliance

Front (Fig. 2-1):

1. Detergent / Softener drawer
2. Worktop
3. Program selector
4. Panel
5. Washer door
6. Service flap
7. Adjustable feet

Rear side (Fig. 2-2):

1. Transportation bolts (T1-T4)
2. Power cord
3. Drain hose
4. Water inlet valve

Accessories

Check the accessories and literature by this list (Fig. 2-3):

Control panel

1. OFF
2. Program selector
3. Display
4. Detergent /Softener drawer
5. Function buttons
6. “Start/Pause” button

Note: Acoustic signal

In the following cases, an acoustic signal is no sounds by default:

• when pressing a button
• at the end of the programme
• when turning the program selector

The acoustic signal can be selected if necessary; see DAILY USE(see P17 6.13).

OFF

• Turn the knob to any position (except OFF) to start the machine. Turn knob the OfF position to shut down the machine(Fig. 3-2).

Programme selector

• By turning the knob(Fig. 3-3), one of 15 programmes (the OFF is not included) that can be selected, its def- ault settings will be displayed.

Display

• The display (Fig. 3-4) shows following information:
  • Washing time
  • End time delay
  • Error codes and service information
  • Steam washing
  • Locking the door
  • Child lock

Detergent drawer
Open dispenser drawer, the following components can be seen (Fig. 3-5):

1. compartment for powder or liquid detergent.
2. compartment for softner.
3. compartment for prewash function(This model does not support this function,do not place anything in it).
4. lock tab, press it down to pull out dispenser drawer.
   • The recommendation on the type of the detergents s suitable for the various washing temperatures.
   • Please refer to the manual of detergent(see P11).

Function buttons

• The function buttons (Fig. 3-6) enable additional options in the selected program before the program- me starts. The related indicators are displayed.
• By switching off the appliance or setting up a new pro- gram, all options are disabled.
• If a button has multiple options, the desired option can be selected by pressing the button sequentially.
• Once the indicator is on stands for the function is selected.

Note: Factory settings
To get the best results in each program, Haier has well defined specific default settings. If there is no special requirement, default settings are recommended.

Function button “Delay”
Press this button (Fig. 3-7) to start the programme with a delay. End time delay could be increased in steps of 30 minutes from 0,5-24h (End time will longer th- an original programme time).For example display off 6:30 means end of programme cycle will be in 6 hoursand 30 minutes. Press “Start/Pause” button to activate the time delay. It is not applicable to programme Spin, Refresh.

Note: Liquid detergent

If using liquid detergent, it is not recommended to activate the end time delay.

Function button “Steam”

• Press this button(Fig. 3-8) to activate Steam Washing function and steam indicator will be on. Only selected programs are applicable with this function. For details, see Chapter 5.

Note: Liquid detergent If using liquid detergent, it is not recommended to activate the end time delay.

• Function button “Steam”
  • Press this button(Fig. 3-8) to active Steam Washing function and steam indicator will be on. Only selected programs are applicable with this function. For details, see Chapter 5.
• Function button“Speed“
  • Press this button (Fig. 3-10) to change or deselect the spin of the programme. If no value is illuminated the display”0″the laundry will not spin.
• “Extra Rinse”button
  • Press this button (Fig. 3-11) to rinse the laundry more intense with fresh water. This is recommended for people with sensitive skin. By Pressing the button several times zero to three additional cycles can be selected. They appear in the display with P–0/P–1/P–2/P–3. Different programme optiones are diffrent.
• “Start/Pause“ button
  • Press this button (Fig. 3-12) gently to start or interrupt the currently displayed programme. During programme setting and during programme run the LED above the button is shining, or if interrupted blinking.
• Child lock
  • Choosing a program and then start, press button“ Delay”and ”Steam”( Fig .3-13) for 3 seconds simultaneously to block all panel elements against activation, panel display ****.
  • For unlocking please press again the two buttons.The child lock indicator lights up when the child lock works. Feature is optional when the machine is running. The display shows cLo I-(Fig. 3-14) if a button will be pressed when the child lock is activated. The change is not running.

Programmes

Water is not heated up.

1. Choose 90°C wash temperature only for special hygienic requirements.
2. Reduce detergent amount because programme duration is short. The design and specifications are subject to change without notice for quality improvement purposes.
3. The preset temperature of the programme “Hygiene” is 90°C, it can’t be changed.

Extra function

Note: Auto Weight

• The appliance is equipped with loading recognition. At low loading, energy, water, and washing time will be reduced automatically in some programs. The display default time may vary depending on the load weight.

Note: Program for energy consumption

• Program for energy consumption testing: Cotton + 60℃.

Daily use

• Power supply
  • Connect the washing machine to socket (220-240V/50Hz: Fig. 6-1). Please refer to section INSTALLTION (see P28).
• Water connection
  • Before connecting check the cleanliness and clarity of the water inlet.
  • Turn on the tap (Fig.6-2).

Note: Tightness

• Turning the tap to check for the joint leakage between the tap and water inlet hose before using.

Preparing laundry

• Sort out clothes according to fabric (cotton, synthetics, wool or silk etc.) and how to dirty they are (Fig. 6-3). Pay attention to the care labeling of washing labels.
• Separate white clothes from coloured ones. Wash coloured textiles first by hand to check if they fade or run.
• Empty pockets (keys, coins, etc.) and remove harder decorative objects (e.g. brooches).
• Garments without hems, delicates and finely woven textile such as fine curtains are to be put into a wash bag to care for this delicate laundry (hand or dry cleaning would be better).
• Close zippers, velco fastener and hooks, make sure the buttons are sewn on tightly.
• Place sensitive items like laundry without firm hem, delicate underwear (Dessous) and small items such as socks, belts, bras, etc. in a wash bag.
• Unfold large pieces of fabric such as bed sheets, bedspreads etc.
• Turn jeans and printed, decorated or color-inten- sive textiles inside out; possibly wash separately.

CAUTION: Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and damage of clothes and appliances.

Care chart

Loading the appliance

• Loading the laundry piece by piece.
• Don’t be overloaded. Take note on the maximum loading capacity on different programs. Definition of maximum load capacity: Keep six inches between loading and top of drum.
• Close the door carefully. Make sure that no pieces of laundry are pinched.

Selecting detergent

• Washing efficiency and performance is determined by used detergent quality.
• Use only machine wash approved detergent.
• If needed use specific detergents, e.g for synthetic and woolen fabric.
• See tips for countertop detergent stickers.
• Do not use dry cleaning agents such as trichloroethylene and similar products.

Choose the best detergent

• L = gel-/liquid detergent
• P = powder detergent
• O = optional _ = no

If using liquid detergent, itis notrecommended to activate the time delay.

We recomment by using:

• Laundry powder: 20°C to 90°C* (best use: 40-60°C)
• Color detergent: 20°C to 60°C (best use: 30-60°C)
• Wool/delicate detergent: 20°C to 30°C (best use: 20-30°C)

Choose 90 °C wash temperature only for special hygienic requirements. If you choose the water temperature 60°C or above, we would like to advise you to use less detergent. Please kindly use the special disinfectant, which is suitable for cotton or synthetic cloth. It is better to use less or free suds detergent powder.

Adding detergent

1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding compartments (Fig. 6-4),
3. Push back the drawer gently.

Note:

• Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener.
• Please follow the instructions on the detergent package. Always fill the detergent just before the beginning of the wash cycle.
• Concentrated liquid detergent should be diluted before adding.
• Do not use liquid detergent if the function “Delay” is selected Carefully choose the program settings according to the care symbols on all laundry labels and according to the programme table.

Switch on the appliance

• Turn the knob to any position (except OFF and Spin) to start the machine. Turn the knob to the OFF position to shut down the machine(Fig. 6-5).

Select a program

• To get the best washing results, select a programme that fits the degree of soiling and sort of laundry type.
• Turn the program knob (Fig. 6-6) to select the right programme. The default settings are displayed.

Note: Odour removal
Before first use we recommended to run programme “Drum Clean” with no load and small amount of detergent in washing agent compartment (2) or special machine cleaner to remove possibly corruptive residues.

Add individual selections
Select required options and settings (Fig. 6-7); refer to Control Panel.

Start wash programme

• Press “Start/Pause” button (Fig. 6-8) to start.
• Appliance operates according to present settings.
• Changes are only possible by cancelling the programme.

Interrupt / cancel wash programme

• To interrupt a running programme press gently “Start/Pause”.
• Press it again to resume operation.

To cancel a running programme and all its individual settings:

1. Press “Start/Pause” button to interrupt the running programme.
2. Turn the knob to select the programme “Spin” and Press “Speed” (selcet speed “®”) to drain the water.
3. Restart the appliance after the cycle finished, select a new programme and start the cycle.

After washing
Note: Door lock

• For safety reasons the door is locked partially during the washing cycle. It is only pos- sible to open the door at the end of the programme or after the programme was can- celled correctly (see description above).
• In case of high water level, high water temperature and during spinning it is not pos- sible to open the door; Loct is displayed

1. At programme cycle end END is displayed.
2. The appliance switches off automatically.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4. Turn off the water supply.
5. Unplug the power cord.
6. Open the door to prevent formation of moisture and odours. Let it open while not used.

Note: Standby-mode / energy -saving mode The power on appliance will shift to standby mode if it won’t be activated within 2 minu- tes before starting the programmes or at the end of programmes. The display will swit- ch off for energy saving purpose.

Note: Standby-mode / energy -saving mode
The power on appliance will shift to standby mode if it won’t be activated within 2 minu- tes before starting the programmes or at the end of programmes. The display will swit- ch off for energy saving purpose.

Activate or deactivate the buzzer

The acoustic signal can be deselected if necessary:

1. Switch on the appliance.
2. Select the DRUCM CLEAN programme.
3. Press the “Steam” button and ”Temp.” button and “Extra Rinse” button at the same time for about 3 seconds. “BEEP OFF” will be displayed and the buzzer will be deactivated

For activating the buzzer press these three buttons at the same time again. “bEEP on”   will be displayed.

Environmentally responsible use

• To achieve best use of energy, water, detergent and time you should use the recommended maximum load size.
• Do not overload (hand width clearance above laundry).
• For slightly soiled laundry select the Quick 15′ programme.
• Apply exact dosages of each washing agent.
• Shall chose the suitable washing temperature as the detergents on market can efficiently clean the laundry below 60 C.
• Raise default settings only due to heavy staining.
• Select max. spinning speed if a domestic dryer is used.

Care and cleaning

Cleaning the detergent drawer

• lake always care there are no detergent residues

Clean the drawer regularly (Fig. 8-1):

1. Pull out the drawer until it stops.
2. Press the release button and remove the drawer.
3. Flush the drawer with water until it is clean and insert the drawer back in the appliance.

Cleaning the machine

• Unplug the machine during cleaning and maintenance.
• Use a soft cloth with soap liquid to clean the machine case (Fig. 8-2) and rubber components.
• Do not use organic chemicals or corrosive solvents.

The water inlet valve and inlet valve filter

• lo prevent blockage of water supply by solid substances like lime clean regularly the inlet valve filter.
• Unplug the power cord and turn off the water supply.
• Unscrew the water inlet hose at the back (Fig. of the appliance as well as on the tap.
• Flush the filters with water and a brush (Fig. 8-4).
• Insert the filter and install the inlet hose.

Cleaning the drum

• Remove accidentally washed items, especially metal parts such as pins, coins, etc. from the drum (Fig. because they cause rust stains and damage.
• Use a non-chloride cleaner to remove rust stains. Observe the warning hints of the cleaning agent manufacturer.
• Do not use any hard objects or steel wool for cleaning.

Long periods of disuse
If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 8-6).
2. Turn off water supply (Fig. 8-7).
3. Open the door to prevent formation of moisture and odours. Let door open while not used.
4. Before next usage check carefully power cord, water inlet and drain hose. Make sure everything is properly installed and without leackage.

Pump filter
Clean the filter once a month and check the pump filter for instance if the appliance:

• Doesn’t drain the water.
• Doesn’t spin.
• Cause unusual noise while running.

WARNING! Scalding Risk! Water in the pump filter can be very hot! Before any action please ensure water has cooled down.

1. Turn off and unplug the machine (Fig. 8-8).
2. Push and open service flap (Fig. 8-9).
3. Provide a flat container to catch leach water (Fig. 8-10). There could be bigger amounts!
4. Pull the drainhose out and hold its end above the container (Fig. 8-10).
5. Take the sealing plug out of the drainhose (Fig. 8-10).
6. After complete drainage close drainhose (Fig. 8-11). and push it back into the machine.
7. Unscrew and remove counter clockwise the pump filter (Fig. 8-12).
8. Remove contaminants and dirt (Fig. 8-13).
9. Clean carefully pump filter, e.g. using running water (Fig. 8-14).
10. Refix it thoroughly (Fig. 8-15).
11. Close service flap.

CAUTION!

• Pump filter sealing must be clean and unhurt. If the filter not fully tightened, water leakage will be occurred.
• The filter must be well-installed or it may lead to water leakage.

Troubleshooting

• Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE.

WARNING!

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• Electrical equipment should be serviced only by qualified electrical experts, because improper repairs can cause considerable consequential damages.
• A damaged power cable should only be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• For the safety of the end-user ,self-repair or non-professional repair is not recommended. Please contact an after sales service.

Information codes

Following codes are displayed only for information referring to the washing cycle. No measures must be performed.

Troubleshooting with display code

Troubleshooting without display code

In case of power failure

• The current programme and its setting will be saved. When power supply is restored operation will be re- sumed.
• If a power failure cuts an operating wash programme door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door. – Danger of burns! Water level has to be lowered as described in “Pump filter”. Not till then pull lever (A) beneath service flap (Fig. 9-1) until door is unlocked by a gentle click. Afterwards refix all parts.
• When the washing machine in a safe state (under the water level below the window along a certain distance, barrel temperature below 55 C, the inner barrel did not turn), may unlock the doors of the machine operation.

Installation

• Preparation
  • Take the appliance out of the packaging.
  • Remove all packaging material including protecting film on cabinet, polystyrene base. keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and porthole. This normal phenomenon results from water tests in the factory.
  • Note: Packaging disposal
  • Keep all packaging materials out of children’s reach and dispose them in an environmen- tally friendly manner.

OPTIONAL: Install noise reduction pads

1. When opening the shrink package,you will find four noise reduction pads. These are used for reducing noise(Fig. 10-1).
2. Lay the washing machine down to its side, port- hole pointing upwards, bottom side towards op- erator.
3. Take out the noise reduction pads and remove the double-sided adhesive protective film; paste around the bottom; the noise reduction pads under the w- ashing machine cabinet as shown in Figure 3(two longer pads in position 1 and 3, two shorter pads in position 2 and 4). Finally set the machine upright again.

Dismantle the transportation bolts
The transportation bolts are designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage.

1. Remove all 4 bolts on the rear side and take out plastic spacers (Fig. 10-2)(Fig. 10-3).
2. Fill left holes with blanking plugs (Fig. 10-4)(Fig. 10-5).

Note: Keep in a safe place

• Keep all parts of the transport protection in a safe place for later use. Whenever the appliance is to be moved at first reinstall the protection parts.

Moving the appliance

• If the machine need to be moved to a distant location, install the transportation bolts removed before installation to pervert damage.

Aligning the appliance
Adjust all feet (Fig. 10-6) to achieve a complete level position. This will minimize vibrations and thus noise during use. It will also reduce wear and tear. We recommend to use a spirit level for adjustment. Floor should be as stable and flat as possible.

1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.

Drain Water Connection
Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain hose fixed to the clip at the appliance back.
WARNING!

• Use only the supplied hose set for the connection.
• Never reuse old hose sets!
• Only connect to cold water supply.
• Before connection, check whether the water is clean and clear.

Following connections are possible:

• Drain hose to sink
  • Hang the drain hose with the U-support over the edge of a sink with adequate size (Fig. 10-7).
  • Protect the U-support sufficiently against slipping.
• Drain hose to wastewater connection
  • The internal diameter of the stand pipe with vent-hole must be minimum 40 mm.
  • Put the drain hose for 80-100mm in the wastewater pipe.
  • Attach the U-support and secure it sufficiently (Fig. 10-8).

Drain hose to sink connection

• The junction must lie above the siphon.
• A spigot connection is usually closed by a pad (A). That must be removed to prevent any disfunction (Fig. 10-9).
• Secure the drain hose with a clamp.

CAUTION!

• The drain hose should not be submerged in water and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80 cm, the washing machine will continuously drain while being filled (self-si-phoning).
• Drain hose is not to be extended. If necessary contact after sales service.

Fresh Water Connection
Make sure that the gaskets are inserted.

1. Connect the water inlet hose with the angled end to the appliance (Fig. 10-10). Tighten the screw joint by hand.
2. The other end connect to a water tap with a 3/4″ thread (Fig. 10-11)

Electrical Connection
Before each connection check if:

• power supply, socket and fusing are appropriate to the rating plate.
• the power socket is earthed and no multi-plug or extension are used.
• the power plug and socket are strictly according. Put the plug into the socket (Fig. 10-12).

WARNING!

• Ensure always that all connections (power supply, drain and fresh water hose) are firm, dry and leack free!
• Take care these parts are never to be crushed, kinked, or twisted.
• If the supply cord is damaged, it must be replaced by the service agent (see warranty card) in order to avoid a hazard.

Technical data

Additional technical data

| HW105-BP1239S8| HW80-BP1239S8
---|---|---
Voltage in V| 220-240V/50Hz| 220-240V/50Hz
Current in A| 10| 10
Max. power in W| 1850| 1950
Water pressure in MPa| 0.03≤P ≤1| 0.03≤P ≤1
Netto weight in kg| 63| 59

Product Dimensions

C Overall depth of product

(To main control board size) mm

| 565| 497
D Overall depth of product mm| 602| 533
E Depth of door open mm| 1065| 997
F Minimum door clearance to adjacent wall mm| 340| 340

Note: The exact height of your washer is dependent on how far the feet are extended from the base of the machine. The space where you install your washer needs to be at least 30mm wider and30mm deeper than its dimensions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>