Kronus BT-01 Smart Wearable Devices User Manual
- July 10, 2024
- Kronus
Table of Contents
Kronus BT-01 Smart Wearable Devices
Specifications
- Wireless Pairing Name: BT-01
- Charging Time: 2 Hours
- Wireless Talk Time : More than 10 hours
- Wireless Music Time : More than 10 hours
- Power/Hands-Free/Stop/Play
- Volume Up/Change
- Volume Down/Previous
Product Usage Instructions
Turning On/Off Wireless Module
To turn on the wireless module, press and hold the button for 3 seconds. To
turn it off, repeat the same step.
Wireless Pairing
- Turn on the wireless module.
- Enable Bluetooth on your device.
- Find BT-01 in the list of available devices and click “Connect”.
Charging Function Operation Instruction
Connect the Data Cable to a USB charger or computer USB port. The other end
connects to the device hidden in a small hole under the Wireless module. A red
LED light will be constantly on during charging and turn off when fully
charged.
Wireless Version
If your audio device does not support the AVRCP function, some commands
like changing songs may not work. Check for software updates on your device to
ensure compatibility.
Troubleshooting
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a different circuit from the receiver.
- Consult the dealer or a technician for assistance.
Operation
Turning On/Off Wireless Module
Wireless Pairing
- Turn On the Wireless Module
- Turn On Wireless On Devices
- Find BT-01 and click Connect
Specifications
In The Box
Charging Function Operation Instruction
Connect the Data Cable to the USB charger(or computer USB port), the other
end connects to the device which is hidden in a small hole under the Wireless
module, our device has an LED indication in the middle red light constantly
shows that the device is charging, Red light off when fully charged.
Wireless Version
If your mobile phone or other Wireless audio device is not equipped with the AVRCP function, the earphone’s CHANGE/PREVIOUS song and PLAY/STOP commands will not pass to the device when pressed. Make sure to check whether a software update is available for your audio device.
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AXASM1-B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: Exposure to strong electrostatic discharge may cause the device to shut down. This is normal behavior. Please manually restart the device if this happens.
MADE IN CHINA
FAQ
- Q: What should I do if the device shuts down due to strong electrostatic discharge?
- A: Exposure to strong electrostatic discharge may cause the device to shut down. Manually restart the device if this happens; it is normal behavior.
- Q: How can I update the software on my audio device?
- A: Check the manufacturer’s website for software updates or contact their customer support for assistance with updating your audio device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>