ADEKO Clpbn Bunk Bed Installation Guide
- July 9, 2024
- ADEKO
Table of Contents
ADEKO Clpbn Bunk Bed Installation
PARTS
READ BEFORE ASSEMBLY
- Make sure you have enough space for assembly.
- Before unpacking fully, please measure the components to ensure they fit your order.
- Once you have unpacked the items from the carton, please check that the kit is complete with the assembly instructions. – If you find that something is missing – let us know, we will check the packing and send the missing parts if necessary.
- Consider whether you will need help with assembly, if you feel it is necessary find a helper. (We recommend two people to assemble the bunk beds).
- We recommend assembling the wooden dowels on a hard flat surface. (You can use cardboard from the packaging)
- When using a hammer to hammer the woodpins, remember not to use too much force and the element should be placed or a flat hard surface.
- REMEMBER! NEVER HAMMER THE WOOD PINS TO THE PARTS IN THE AIR
Assembly instruction
ATTENTION!
- HIGH BED, THERE IS A RISK OF TIPPING OVER.
- THE BED SHOULD BE ATTACHED TO THE WALL WITH ATTACHMENT TAPES.
- THE SET DOES NOT HAVE MOUNTING SCREWS TO THE WALL,
- YOU SHOULD BUY THE APPROPRIATE SCREW ON YOUR OWN
IMPORTANT!
-
Children can become trapped between the bed and the wall. To avoid the risk of serious injury, the distance between the top safety rail and the wall must not exceed 75mm or should be more than 230mm.
-
Do not use a bunk/high bed if any structural part is damaged or missing.
-
High beds and the upper level of a bunk bed are not suitable for children under 6 years of age due to the risk of injury from falls.
-
Bunk/high beds can pose a serious risk of injury from strangulation if not used correctly. Never attach or hang any objects to any part of the bed that are not intended for use with the bed min. but not limited to ropes, cords, hooks, straps, bags.
-
Always follow the manufacturer’s instructions.
-
Ventilation of the room is necessary to keep humidity low and prevent mold around the bed.
-
All bunk/high beds intended to be assembled by
someone other than the manufacturer or his/her representative should be accompanied by assembly instructions including a list of parts supplied and details of any tools needed to assemble the bed. -
Regularly check that all mounting fixings are correctly tightened.
CONTACT
- Planty Kowalskiego 5 41-709 Ruda Slaska
- NIP : 6412545858
- www.adeko.kids
- e-mail: biuro@adeko.kids
Complaints e-mail: reklamacje@adeko.kids