YINGXIN YX-01 Bluetooth Single Mini In Ear Earbuds User Manual

YINGXIN YX-01 Bluetooth Single Mini In Ear Earbuds

Introduction

Thanks for purchasing and using our Bluetooth headset
This manual helps you understand how to use this bluetooth headset

Before using Bluetooth headset

• You should understand the Bluetooth function of your mobile phone or other device.
• More suitable for the right earMiddle earplugs are suitable for 90% of the population.
• It is recommended to try on the middle earplugs

Start Using

Press and hold the multifunction button on the middle surface of the Bluetooth headset for 8 seconds until the indicator light flashes blue, red, blue and red alternately

Note: [The blue light cannot find the model number]

• Need to press and hold for 8 seconds in the shutdown state
• Don’t let go until the indicator light flashes alternately in blue, red, blue and red Use your mobile phone to search for cooperation
• After the cooperation is successful, press the power button for 2-3 seconds to power on and automatically connect

Executive standard: GB4943.1-2011

Open the phone Bluetooth search “YX-01” and click Connect

Charge the headset

• When the battery is low, the headset will flesh red and give voice reminders
• Use the charging cable to connect to the USB port to charge the headset
• When the red light is constantly on and the blue light is constantly on in the charging state, it is in the fully charged state.

Function And Operation

Switch machine operation steps

1. Pairing: When the power is off, press and hold the power button for 6 seconds (Blue and red lights flash alternately)
2. Power on: in the off state, press and hold the power button for about 3 seconds (Blue light flashes)
3. Shut down: in the power-on state, long press the power button for 4 seconds (Red light flashes)

Chinese and English voice prompt switch

• In the power-on state, double-click the function key for about 1 second to switch between Chinese and English voices

Method of operation

answer the phone

• When an incoming call (blue light flashes), click the power button to answer it once

End the call

• When in a call, tap the power button once to end the call

Chinese and English switch in

When it is turned on (not connected), double-click the function button and let go to switch between Chinese and English

Play music

• Click the power button 1 time in standby mode

Pause music

• During music playback, click the power button 1 time to pause playback Double-click the next song, and triple-click the last number to redial

Charging precautions

1. Use a DC5V charger to output voltage to the USB port of the computer or the USB port of the phone charger (a legitimate manufacturer’s safety-certified charger must be selected)
2. During the charging process, the red light is on
3. Repeated charging and discharging can reduce battery performance, which Is a normal rechargeable battery

Product parameter

Bluetooth version: YX-01

Audio: OSP voice data processing
Operating range: 10m
Talk time: about 8 hours
Battery capacity: 50mAh
Weight: 4.9g

Safety Guidelines

1. Do not disassemble or modify the device for any reason, otherwise it may cause the headset to malfunction or burn
2. Do not let the device get wet with liquid, otherwise it will cause serious damage to the device
3. Do not place the device in an environment where the temperature is too low or too high (below o•c or above 45 ° C)
4. Do not use the device under thunderstorms. Thunderstorms can cause the device to work abnormally, signal interruption, etc.
5. Do not use mobile power to charge, otherwise it may cause the headset to malfunction or burn
6. Do not charge with a charger above 1A, otherwise it may cause the headset to malfunction or burn
   • [The above 6 points of damage are not covered by the warranty]

FCC STATEMENT

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for helpThe device has been evaluated to meet general RF exposure requirements.

The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>