VTAC VT-7983 LED Designer Hanging Light Installation Guide
- July 4, 2024
- VTAC
Table of Contents
VTAC VT-7983 LED Designer Hanging Light
Product Information
Specifications
- Product Name: LED Designer Hanging Light
- Model: VT-7983
- SKU: 23373
- Watts: 40W
- Lumens: 4800 LM
- Beam Angle: Not specified
- Material: Metal
- Base Size: D180 mm
- Dimensions: D600xH1220 mm
- Input Power: AC220-240V, 50/60Hz
- Additional Information: Not Dimmable
Product Usage Instructions
Installation:
- Ensure the power source is switched off before installation.
- Hang the light fixture securely from a ceiling hook or mounting bracket.
- Connect the wires following the manufacturer’s instructions.
Maintenance:
- Regularly clean the light fixture with a soft, dry cloth to prevent dust buildup.
- If the LED light source needs replacement, contact a professional for assistance.
Safety Precautions:
- Avoid exposing the light fixture to water or moisture to prevent electrical hazards.
- Do not attempt to dim the light if it is specified as non-dimmable.
Frequently Asked Questions (FAQ)
-
Q: Can I replace the LED light source myself?
A: It is recommended to have the LED light source replaced by a professional to ensure proper installation and safety. -
Q: What should I do if the light fixture is not working?
A: Check the power source and connections first. If the issue persists, consult a professional for further assistance. -
Q: Can the hanging light be used outdoors?
A: It is not recommended to use this hanging light outdoors, as it is designed for indoor use only.
TECHNICAL DATA
- MODEL VT-7983
- SKU 23373
- WATTS 40W
- LUMENS 4800 LM
- BEAM ANGLE 270°
- MATERIAL Metal
- BASE SIZE D180 mm
- DIMENSION D600xH1220 mm
- INPUT POWER AC220-240V,50/60Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor Use only.
INSTALLATION DIAGRAM
- Switch off the power before starting the installation.
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections with connectors.
- Connect the live wire (L) from the fitting to the live wire from main power supply.
- Connect the neutral wire (N) from the fitting to the neutral wire from main power supply.
- Connect the earth wire from the fitting to the earth wire from main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
- Use screws to fix the canopy to the mounting bar.
- Check if the installation is completed and turn on the power.
Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>