GEHA GH2039BGB TRI-Mode Gaming Headphone Instruction Manual

GEHA GH2039BGB TRI-Mode Gaming Headphone

Product Information
Specifications

• Model: GH-2039BG
• FCC Compliance: Part 15
• ISEDC Compliance: Licence-exempt RSS standard

Product Usage Instructions
FCC Statement
The device complies with part 15 of the FCC Rules. To ensure proper operation:

1. Avoid making any changes or modifications not approved by the responsible party.
2. Do not cause harmful interference with other devices.
3. Accept any interference received, including undesired operation caused by external sources. interference, including that which may disrupt operation.

ISEDC Radiation Exposure Statement
This equipment complies with ISEDC RF radiation exposure limits for an uncontrolled environment:

1. Do not co-locate this transmitter with any other antenna or transmitter.
2. Operate the device in compliance with ISEDC regulations.

FAQ
Q: What should I do if I encounter interference while using the device?
A: If interference occurs, try repositioning the device or moving it away from potential sources of interference.

Headphone Instruction manual

Specification

• Speaker: 50mm
• Impedance: 32+15%0 Sensitivity: 1113dB
• Frequency response: 20Hz to 20kHz
• Microphone: 06.0×5.0mm
• Microphone sensitivity: -42+3dB
• Wireless distance: 10m Plug: BT +3.5mm
• Audio cable lithium battery: 1050mAh
• Charging time: about 3H Charging method: (Type-C) USB 5V
• Low latency: 25MS Size: 92195205mm
•  prostity pray: 2416: 35H/No backight) OH/brightest
• backligh): Wireles: 52-/NO backlight), 11H(brightest backlight)

Special Features–DIY(Comes with an extra set of removable magnetic ear shells)

Operation Guide

Wired mode 3.5mm Audio cable)

1. Plug and play: Connecting the headphone to a music player with the provided dual 3.5mm audio cable, the headphone can be used as wired headphone without starting.
2. In this mode, you can’t use any function of the headphone, including pause playback, volume adjustment, microphone and so on.

2.4G mode

1.  Operating instructions
2.  Connect the receiver to PC/PS4 or other devices, the indicator lights up and flashes.
3.  Press the power button to turn on the headset, the headset power indicator blue light is always on for 1 second. (Headset power indicator flashes red/green alternately while waiting to connect.After the connection is successful, the headset indicator blinks green once every 2 seconds.)
4.  Toggle the toggle switch up and down to adjust the volume level, toggle up and down for 1.5 seconds to adjust the up and down song.
5. The microphone is on by default. To turn the microphone off, press the microphone key once (a beep will sound and the microphone indicator will turn off). To turn the microphone on, press the microphone key again (a beep will sound and the microphone indicator will turn red). (See 2.4G Ul below for specific operations)

Wireless mode

1. Turn on the headphone, double-click the power switch to Wireless mode, and you can hear the voice prompt:”Wireless mode”. When the headphone enter the pairing mode, the headphone power indicator flashes red and blue alternately;
2. This headphone is compatible with most of smart phones and other devices that support Wireless headphone protocol.
3.  Turn on your phone and enter Wireless mode. Then search “GH-2039BG” for paring.
4. Click “GH-2039B G” for pairing. After successful pairing, there will be a voice prompt and the blue light of the display light will flash once at an interval of 2 seconds. (If the device have been paired before, the headphone will automatically connect with it under Wireless mode.)

Key function

Answer an incoming call
Double click the MIC button to answer the incoming call. Tip: As some mobile phones answer calls through their own receivers by default, please refer to your mobile phone instructions and set them on your mobile phone.

End current call
Double click the MIC button to end the current call.

Refuse to answer the phone
When there is an incoming call, press the MIC button for 1.5 seconds.

Three-way call answer/end call
Triple-tap the MIC button to hold the current call, answer a new call, and triple-tap again to rotate between the two calls.

Play music

1.  Play/Pause: short press the toggle switch.
2. Volume+: Toggle the toggle up a bit
3. Volume-: Toggle the lever down a bit
4. Previous song: Toggle up for 1.5 seconds.
5. Next song: Toggle down for 1.5 seconds.(See the Wireless Ul below for details.)

Warnings

1. Please follow the instructions to operate PLS charge the headphone with input power below 3.
2. 3V, in order to protect the battery;
3. Please store or use the headphone in a normal temperature environment.
4. PLS keep the headphone from heat source, such as radiators, hot air regulators, stoves, or other heat-generating instruments. As it is not anti-high temperature.
5. Don’t jam the ports of the headphone, such as charger port, LED port and microphone etc..
6. In order to protect your hearing and extend the headphone service life, it is not recommended to adjust the volume to the maximum level for a long time.
7. Whatever reasons damage the headphone, please feel free to contact our after-sales staff in time rath.

FCC STATEMENT

Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment  on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be coÿlocated or operating in conjunction with any other antenna or transmitter.

IC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>