BOEN 14 MM 2V Eiken Pale white Lamelparket Pure Instruction Manual
- June 29, 2024
- BOEN
Table of Contents
BOEN 14 MM 2V Eiken Pale white Lamelparket Pure
Specifications:
- KPI: Max. 60 W/sqm
- Dynamic load, EN13793: DL25 50 000 Cycles
- Static load, EN826 CS: 40 kPa
- Sustained static load, EN1606 CC: 5kPa
- Max Room Dimension for Floating Installation: 12 x 12m
Product Usage Instructions
-
Storage:
Always store the hardwood flooring in dry conditions and do not open the cartons until just before use. -
Installation:
For floating installation, it is recommended to use a minimum of BOEN-Maxima underlay. -
Room Dimensions :
Ensure that the room dimensions for floating installation do not exceed 12 x 12m. -
Static Load:
The flooring can sustain a static load of up to 40 kPa and a sustained static load of up to 5kPa. -
Installation Precision:
Ensure precision during installation with the following tolerances: Max: 0.1m = +/- 0.5mm (1/64), 0.6m = +/- 1.0mm (3/64), 1.0m = +/- 1.5mm (1/16).
FAQ:
-
Q: What should I do if there are doubts about the grading or visual defects of the parquet?
A: It is important to make any claims regarding grading or defects before installing the flooring. Contact customer service for assistance. -
Q: Where can I find more information about BOEN and its products?
A: For more information on BOEN and BOEN products, please visit: www.boen.com
Installation instructions
Our quality controllers have sorted and graded the parquet. Should there be any doubt concerning grading and/or visual defects, it is important that claims be made prior to the flooring being installed. For more information on BOEN and BOEN products, please visit: www.boen.com
INSTALLATION INSTRUCTIONS
Always store the hardwood flooring in dry conditions and do not open the
cartons until just before use.
Parquet flooring according to EN 13489: 2017-12 and EN 14342:2013 9,5-23 mm total thickness; parquet for indoor use
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>