OCOM 2AJ2BM10 Android POS Portable POS Terminal 58mm thermal Printer User Manual

Android POS

User Manual

Product Description

1. NFC

2. Scanner

3. Second display

4. Functional Key

5. Main Screen

6. Printer button

7. Printer

8. fiscal room Cover

9. Card Cover

10. Volume key

11. Power key

12. Interface

13. TF Card Slots

14. SIM Card Slots

15. PSAM Card Slots

16. Fiscal memory room

Power key

Short press: wake up the screen, lock the screen.
Long press: long press for 2-3 second in power off mode to switch on the device.
Long press for 2-3 seconds in normal operation mode to select power off or reboot.

Volume key

Volume adjustment.

Customer display

For Customizing the display of tickets, data and other content.

Scanner

For payment scanning and 1D/2D code quick scanning.

SIM Card Slots/PSAM Card Slots

Note: To prevent system error, please make sure the device is turned off when you insert or remove the SIM cards.

TF Card Slots

For device adding additional storage space.
Note: To prevent system error, please make sure the device is turned off when you insert or remove the TF card.

Environmental/Material

Operating temperature: -5°C~45°C
Storage temperature: -25°C~60°C
1.2 M Anti-Drop

Functional Key

For adding customization function.

Fiscal memory room

For installing the fiscal memory.

Power on

1. Long press the power key for about 3 seconds.

SIM Card, PSAM Card&TF Card Installation

1. Take out the card cover, and the card sockets will be shown.
2. Push the card into the socket correctly. Be sure the card is in the right position.

Printing instruction

This device support 80mm thermal paper with specifications of 80±0.5mm*80mm.

• Press the button to open the paper container.
• Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter.
• Close the cover of the paper container to finish printing paper fedding.

Note: If the printed paper is blank, please check whether the paper roll has been install in the correct direction.

1. Press

Card Reading

1. NFC tag, put the NFC tag over the printer case of the device.

Scan the 1D/2D code

1. Place the electronic 1D/2D code(like in your cellphone) adown towards the camera vertically.

Fiscal Memory Room and the Interface specification

1. Remove the screws from the fiscal memory room cover and you will see the room.

Notes:

1. Fiscal Memory Room maximum size: 24mm37mm10.5mm

Lead seal screw position

Indicator and status logic

1. Long press the power key for about 3 seconds.

2. Network status Indicator

Network status Indicator logic:

Unable to connect network – red light
networking – Flashing yellow light
Networking successful – Steady green light
Data transfer – Flashing green light

Accessories

Before using the POS terminal, ensure that all the accessories above are included in the package.

If you have any problems, please contact the services provider of the distributors.

Specification

Customer display:4-inch
Keypad| 1 Power (lock screen) button
2 Volume (+/-) button
1* Functional Key
Indicator| 1 lights
Thermal Printer| Paper width: 80mm, φ80mm
Contactless Card Reader (Optional)| ISO14443 Type A/B, Mifare®
ISO18092 compliant
Camera| 2M Pixel, auto focus
(Barcode software decoding)
SIM Slots| 2 Nano SIMs
eSIMs (Optional)
SAM Slots (Optional)| 2 SAMs
Communications| LTE/WCDMA/GPRS/WiFi/Bluetooth
GNSS (Optional)| GPS L1 C/A, BDS B1I
Peripheral Ports| 1 Tpye-C, 4 USB, 1 RJ12(drawer port 24V), 1 RJ11(RS232), 1 RJ45
Audio| Digital Audio Speaker, Microphone
Power Supply| 24V/2.5A
Environmental| Operating temperature: -5°C~45°C
Storage temperature: -25°C~60°C
MDM (Optional)| Mobile Device Management

For CE

UNITS 502 & 504 5/F, UNITS 201 & 203 2/F, BUILDING 5 ZONE A, HANTIAN SCIENCE & TECHNOLOGY PARK, NO.17 SHENHAI RD., GUICHENG STREET,NANHAI DISTRICT, FOSHAN, GUANGDONG, CHINA
Transmitter Frequency:| EGSM 900: 880-915MHz
DCS 1800: 1710-1785MHz
WCDMA 2100: 1920-1980MHz
WCDMA 900: 880-915MHz
LTE Band 1: 1920-1980MHz
LTE Band 3: 1710-1785MHz
LTE Band 7: 2500-2570MHz
LTE Band 8: 880-915MHz
LTE Band 20: 832-862MHz
LTE Band 28: 703-748MHz
LTE Band 38: 2570-2620MHz
LTE Band 40: 2300-2400MHz
LTE Band 41: 2496-2690MHz
Bluetooth/BLE: 2402-2480MHz
2.4G Wi-Fi: 2412-2472MHz
5G Wi-Fi: 5150-5250MHz
NFC:13.56MHz
Receiver Frequency:| EGSM 900: 925-960MHz
DCS 1800: 1805-1880MHz
WCDMA 2100: 2110-2170MHz
WCDMA 900: 925-960MHz
LTE Band 1: 2110-2170MHz
LTE Band 3: 1805-1880MHz
LTE Band 7: 2620-2690MHz
LTE Band 8: 925-960MHz
LTE Band 20: 791-821MHz
LTE Band 28: 758-803MHz
LTE Band 38: 2570-2620MHz
LTE Band 40: 2300-2400MHz
LTE Band 41: 2496-2690MHz
Bluetooth/BLE: 2402-2480MHz
2.4G Wi-Fi: 2412-2472MHz
5G Wi-Fi: 5150-5250MHz
NFC:13.56MHz
GPS L1 C/A, BDS B1I: 1559-1610 MHz
RF-Output Power: ERP/EIRP/ Conducted| EGSM900: 32.91dBm (GMSK), 26.67dBm (8PSK)
DCS 1800: 29.03dBm (GMSK), 25.47dBm (8PSK)
WCDMA 2100: 23.12dBm
WCDMA 900: 24.02dBm
LTE Band 1: 22.4dBm
LTE Band 3: 22.5dBm
LTE Band 7: 21.9dBm
LTE Band 8: 23.1dBm
LTE Band 20: 23.2dBm
LTE Band 28: 22.9dBm
LTE Band 38: 22.0dBm
LTE Band 40: 21.5dBm
LTE Band 41: 22.3dBm
Bluetooth: 7.72 dBm
BLE: 4.97dBm
2.4G Wi-Fi: 18.74dBm
5G Wi-Fi:
5150-5250 MHz: 18.85dBm
NFC: 21.24dBuA/m @ 3m
|

BE

| BG| CZ| DK| DE| EE| IE| EL
---|---|---|---|---|---|---|---|---
ES| FR| HR| IT| CY| LV| LT|

LU

HU

| MT| NL| AT| PL| PT| RO| SI
SK| FI| SE| NO| IS| LI| CH|

TR

In all EU member state, operation of 5150-5250 MHZ is restricted to indoor use only.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Android POS

Create a colorful future

Documents / Resources

| OCOM 2AJ2BM10 Android POS Portable POS Terminal 58mm thermal Printer [pdf] User Manual
2AJ2B-M10, 2AJ2BM10, m10, 2AJ2BM10 Android POS Portable POS Terminal 58mm thermal Printer, 2AJ2BM10, Android POS Portable POS Terminal 58mm thermal Printer, POS Terminal 58mm thermal Printer, Terminal 58mm thermal Printer, thermal Printer, Printer
---|---

References

• Easyhost

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>