LSYYR T4-1C GPS with Battery Real Time Positioning Car Tracker User Manual

LSYYR T4-1C GPS with Battery Real Time Positioning Car Tracker

Specifications

• Operating voltage : 12-90VDC
• Internal backup battery : 3.7V/150mAH
• Operating current : 50mA @12V
• Standby current : 5mA @12V
• Operating temperature: -20 to 60
• Storage temperature: -40 to +85
• Positioning accuracy: [Not provided in the text]

Product Usage Instructions

Installation

1. Ensure the power supply voltage is within the range of 12-90VDC.
2. Connect the device according to the wiring diagram provided in the manual.
3. Secure the device in a suitable location within the vehicle.

Activation

1. Power on the device using the appropriate power source.
2. Follow the activation steps outlined in the manual for online activation.

Usage

1. Monitor fuel supply control and driving behaviour analysis through the device.
2. Utilize the Multi-GNSS feature for accurate location tracking.
3. Enable ACC detection for enhanced security.
4. Benefit from smart power-saving options to optimize battery life.
5. Respond to anomaly alerts promptly to ensure safety and efficiency.

FAQ

• Q: What should I do if the appearance and colour of the product have changed?
• A: In case of any changes, refer to the product manual for guidance on using the updated version.
• Q : How can I ensure accurate positioning with the device?
• A : Ensure proper installation and placement of the device as per the manual instructions to achieve optimal positioning accuracy.

Please read the manuals carefully before you use it, so as to get the correct installation and quick online activation. If the appearance and colour of the product are changed, the object will prevail.

Introduction

Features

1. Fuel supply control
2. Driving behaviour analysis
3. Multi-GNSS
4. ACC detection
5. Location data re-upload
6. Smart power saving
7. Anomaly alert (vibration, over-speed, power-off, etc.)

Operating Environment

• Operating voltage: 12 -90VDC
• Internal backup battery: 3.7V/150mAH battery Operating current: 50mA @12V
• Standby current: 5mA @12V
• Operating temperature : -20℃ to 60℃
• Storage temperature: -40℃ to +85℃
• Positioning accuracy: <10m
• Location modes: GPS, BDS, AGPS, and LBS

Frequency Bands

Overview

Appearance

Connotations of Indicators

Note: By default, when the device is stationary for 3 minutes, the LED will automatically turn off and wake up after a vibration.

Installation

Inserting the SIM Card

• Step 1 Prepare a proper SIM card;
• Step 2 Insert the SIM

After the SIM card is inserted, the device powers on using the backup battery. If the device fails to power on due to low battery, you can connect the device to the external power.
Note : The SIM card must be inserted correctly, has GPRS services activated, and is not in arrears. If the SIM is identified and requires a PIN, please disable the PIN request.After the SIM card is inserted, the device powers on using the backup battery. If the device fails to power on due to low battery, you can connect the device to the external power.
Note: The SIM card must be inserted correctly, has GPRS services activated, and is not in arrears. If the SIM is identified and requires a PIN, please disable the PIN request.

Installing the Device
Product wiring diagram

1. Use a multimeter to find out the positive and negative terminals of the vehicle battery and the ACC line.
2. Connect the red wire (positive)of the device configuration power cable to the positive terminal of the vehicle battery.
3. Plug in the connector as shown in the figure below.

Product Features

Positioning function

| 4G all-network| Support 4G network, efficient transmission, faster and more accurate.

Timed tracking

| Transmit back the positioning information

such as latitude and longitude according to the set interval time.

Street map| 360 degree high-definition map
Speeding alarm| When driving over speed, the locator will send an alarm to your cell phone
Vibration alarm| Built-in vibration sensor, continuous

vibration of the vehicle, the device will immediately send alarm alerts

Electronic fence| When the car driving range exceeds the

specified area, the platform will send alarm information

History track

| Can playback 90 days of the track, playback the speed, direction, stay time and other

content

Displacement alarm

| When the vehicle encounters illegal

operation or theft, the fuel and electricity can

be cut off remotely by computer or cell phone APP

Fleet

management

| 1 cell phone can manage multiple devices, or 1 device multiple cell phone management

Analysis of common problems

Failure

phenomenon

| Failure analysis| Treatment method
---|---|---

Blue light flashes slowly

| Determine whether to use the terminal in areas with poor GPS signals, such as near tall buildings or

underground parking lots

| ****

Move the vehicle to a location with a good signal Use the terminal

Determine whether the front windshield of the vehicle has metal heat insulation film affecting the signal reception| If there is a film, the equipment will be changed to other vehicles to test whether the blue light is always on, such as in other vehicles without film to test no problem, then the vehicle is

caused by the film

Determine whether there is a shield or signal jammer on or around the car| If there is a shield or source of interference, remove the shield or source of interference and try to

reinstall

Blue light

flashing fast

| Chip failure| Return to factory for repair

Yellow light is flashing fast

| Determine whether the SIM

card is installed properly

| Check whether the SIM card is

installed in place

Determine if there is dirt or poor contact on the metal

the surface of the SIM card

| Wipe the metal chip surface with a clean cloth or repeatedly insert and

remove the card several times

The yellow light flashes slowly.

| Determine if the vehicle is in a place with no mobile network, such as an

underground parking lot.

| Please drive the vehicle to a place with a good network signal and try to reinstall it.
Determine whether the

The server background is normal

| Ask if the server of the background

the management platform is normal

Determine whether the SIM card status is normal or not| Check whether the status of the SIM card is normal through the SIM card

inquiry platform

Determine whether there is a shield or signal interferer on the car or around| If there is a shield or source of interference, remove the shield or source of interference and try to

reinstall

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>