danalock V3 Euro Door Cylinder Installation Guide
- June 16, 2024
- danalock
Table of Contents
danalock V3 Euro Door Cylinder
Product Information
Product Specifications:
- Product Name: Danalock
- Compatibility: Euro cylinder doors
- Installation Requirement: Cylinder exchange
- Measurement: Center of screw-hole to outside and inside
Product Usage Instructions
Installing the Danalock on a Door with a Euro Cylinder:
- Determine the type of euro cylinder your door has.
- Measure your current cylinder to determine the size needed for replacement.
- Follow these steps to measure your cylinder:
- Dismount the existing cylinder by unscrewing the screw and holding it in place on the door.
- Measure the cylinder from the center of the screwhole:
* Outside measurement
* Inside measurement- Order a new cylinder based on your measurements.
- Mount the Danalock on the door using the new cylinder as per the manufacturer’s instructions.
Frequently Asked Questions (FAQ):
-
Q: Can I install Danalock on a door without a euro cylinder?
A: No, Danalock is specifically designed for doors with euro cylinders. -
Q: Do I need any special tools for installing Danalock?
A: Basic tools like a screwdriver may be needed for installation.
Installation Instruction
- To mount the Danalock on a door with a euro cylinder you will have to exchange it.
- The cylinder could look like the ones to the left, or it could be a completely different model, these illustrations are just examples.
Before You buy a new cylinder, you need to measure your current cylinder to find out which size You need to order.
Follow these steps to measure your cylinder:
- Dismount you existing cylinder. You do this by unscrewing the screw in the door that holds the cylinder.
- Now you will have to measure the cylinder. You measure the cylinder as shown here:
Read User Manual Online (PDF format)
Loading......